Hello guys
I have a car charger installation coming up and will be installed as per the below.
TN-S supply to building
35mm thermosetting main tails supply existing 3 phase DB.
X 5 chargers to be supplied by by 4mm SWA cabling on tray protected by a 32a 30ma RCCBO. the chargers are located...
https://www.amazon.co.uk/d/Mobile-Phone-Batteries/Samsung-Galaxy-Battery-Charger-Rechargeable-Portable-External/B01DJC492K/ref=sr_1_3?ie=UTF8&qid=1487958245&sr=8-3&keywords=samsung+galaxy+s7+edge+charger+case
I bought the above yesterday from Amazon, purely because my phone runs out of charge...
as title, I have a lot of car chargers to test. They are plugged into a socket via standard 13a plug, then goes into the charging unit, from there a lead to the car with the socket to be put into the car. They are for nissans and Mitsubishi cars. I have tried testing on seaward 250 but fails...
Have any of you lads got one of these https://www.amazon.co.uk/Samsung-Wireless-Inductive-Charger-Compatible/dp/B01BSOPVDM/ref=sr_1_4?s=electronics&ie=UTF8&qid=1482513150&sr=1-4&keywords=samsung+wireless+charger
The reason I bought it was that I'm sick of charger wires everywhere and part of...
Doing an eicr on transport company's yard,most probably 15 years+, old.
Normal observations,wondering what you guys think about this one,in the middle of nowhere there are 3p/N/E commando plug/ sockets,rated 32amps,these are used for charging refrigerator units,supplied with trailing leads.
They...
Evening everyone,
What is everyones thoughts on labour rates that you would charge out if you were a business? I have recently started a company quoting for small jobs and charging myself out at £25ph. I live 20miles north of london. Would you agree that this is an acceptable rate?
Thanks
Liam
I was just wondering if many folk are now involved with the installation of EV charging points?
Demand in this area is obviously increasing. I'm very keen on green energy and I'm considering specialising in this area, is anyone else doing the same?
Hi Guys,
Looking at Ev Charging and the earth rod scenario on a PME System.
Looking at A722.3 on page 282 in the BYB but the equation doesn't make much sense to me in all honesty.
i can see Raev has to be less than or equal to but is 70 Uo 70 x 230 or 70+230 over Iinst( 230-70)
Having a...
Hi guys, we have just developed a MID Approved meter that enables Hybrid Inverters Batteries to be charged/topped up through economy 7 type tariffs, your thoughts/opinions would be appreciated
Currently the DNOs will not allow this, due to the way the meter will clock up export through import...
I have a couple of questions about testing and maintenance of emergency lights.
I have been told that if the LED on an emergency light does not work it must be considered “Failed” and the fitting replaced, but when reading up, I cannot find any regulations or guidance to suggest this is...
Hello,
I have a machine with 24v system. Couple of weeks ago it stopped charging the batteries. Firstly I suspected a blown fuse, which was not the case. Then I turned my attention to the alternator. It has 3 leads (battery, feedback, excitation, 4th is ground). I got no reading from those...
Hello all, just a thought...
Could i ask if anyone ever charges for testing, certs and notification on top of general electrical install or do you allways include the above within the contract price for sockets, downlights, cu change etc...
Just wondered because sometimes that call all take up...
Evening all.
I have been asked to quote for an electric car charging point. The customer has specifically asked for a 32A commando socket to be fitted.
I have not fitted a home charging point before and was hoping to hear how some of you guys had done it as reading literature on it there seems...
Hi,
Just thought id share with you my newly made MCB storage setup and charging station.
I just need to fit a smoke detector in the charging station so that I can leave batteries unattended whilst on charge as in the garage.
Also, some photos of the lights I have just fitted to the side of...
Hi Guys,
Pricing a job where there is a requirement to provide 50 Tazer charging points, any one have any experience on expected loadings without diversity, no other info provided.
I have looked at the tazer X26 which is battery powered but can have an additional battery tray/charger but give...
Hi,
This is a question for anyone who can help with DC etc and Leisure Batteries.
I have a 500w load at 12v, made up of.
75w car stereo which includes 15w per Chanel, and 425w of LED lights.
I have 5x 100Ah Leisure Batteries all connected in Parallel, total of approx 500Ah.
My load is 500w...
I need to wire up my solar panels to my motorhome leisure batteries.
I have a 160W permanently mounted panel that will be hard wired to my MPPT controller.
I will occasionally wish to add a portable 100W panel to the setup.
Can I connect this portable panel directly into the MPPT as well when...
http://www.thepetitionsite.com/en-gb/takeaction/929/567/163/?taf_id=14323213&cid=fb_na#
We have starting a petition to get ACAS to look into the deduction of employers NI from our rates. The aim is to ensure that when working under an umbrella company that the agency pay our rates and 13.8%...
Hi Gents, I have an e Type Jaguar that I recently bought and imported from the USA so no history available. I have a problem with the battery charging. The original alternator has been replaced by previous owner with an Iskra AAK 11.201.511 but only outputs 13.6 volts dropping to 12.5 volts with...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc