Hi all. I was at a job today where the issue was a fitting flickering. Come to find out its the time lag switches. has anyone tried rectifying this with a 1μF capacitor between Switch live and neutral? Me thinks this should fix it.
btw sorry for my terrible 5 year old spelling :)
Hi everyone,
I’m sure this may have been done already, but there is a debate I have with colleagues about the best type of downlighter to install, and in turn the best type of lamp to use in the fitting, and I’d like to put the debate to bed once and for all.
The way I see it is as...
Hello, I have just installed an ADE Optima Compact with a Ventcroft Compact bell box. All seems to work okay including the internal sounder but the external siren is very quiet. I have checked that the white jumper is not in the "test" position. This is my first venture into alarm installations...
HI, Just replaced an old security alarm panel for an ade optima compact panel, using zones (1-5) i have set the remaining zones (6-8) to unused on programme 1.Also zones 1,3,4 are set as timed zones for exit/entry. I performed the walk test, all was ok and the system arms and disarms as it...
Lads
Im after a Two 16amp EATON EMBH 116R30 RCBO's, Does anyone no if any other type of RCBO will fit?. Im having abit of trouble getting them (been let down by wholesaler at last min). CEF want £110 for the pair!!. Need them for Tuesady.
I have a new toilet block in a school which has 10 stalls, each to have its own sensor and circular compact fitting, it has been left to me to design the lighting, has anyone had any troubles switching these by PIR sensors?
I didnt think there would be any issues but a mate said he had trouble...
Hi does anybody understand how to conect the pellet boiler to the CH wiring center, have been told to conect the externel thermostat conection on the boiler to the orange and greys of the motorised valves, mid port and a 2 way valve for the megaflow. must be no live feeds to the thermostat...
Hi all,
I have recenly installed an MK K1525 Dimmer K1525 WHI
that is used for dimmer one CPF that is a Megaman Dimmerable Compact Fluorescent 18w BC
The problem I have is when the lamp is cold it flickers and strobes like a disco when turned energised. What is strange that when this CPF is...
I am having trouble programming an Optimal Compact alarm panel. I am only using programme 1 and have set all the zones unused in programmes 2 and 3. I am only using 2 zones in programme 1 and have set all other zones unused. I have set programme 1, zone 1, to timed. The problem is that when...
I have for sale a Bosch 36v lithium compact sds drill, its has 3 small batteries and 1 big battery, can take pictures tomorow
£250
I have makita 18v lithium (black and white anniversary) 2 speed drill in aluminium case, 1 battery
£100
Obviously cash on collection, im off the Afghan end of...
Hi to all
Ive got a small problem on a job that ive just about finished and ready to handover.
Background; bed & breakfast chalets with compact florescent recessed spot lights protected by Protek RCBOs.
baisically on one of these lighting circuits the RCBO (actually its a Protek SRCBO)...
Its 10 months old and has been used a handfull of times. Got it for a particular job I did and used it much since.
Fully working order but just has the usual scratched to the body.
Will get some photos tomorrow of the actual drill, but heres a link to give you all the tech spec.
Makita DA3010...
Hi lads, (and lasses?)
I'm having a bit of a mare with an alarm panel, the customer does not know the code as the alarm was in when she bought the place, is there an engineer code anyone can pm me so i can reset the panel? its an 8 zone sl compact panel.
cheers
Hi guys, I am selling my Bosch Compact here: http://cgi.ebay.co.uk/Bosch-GBH36-GBH-36-V-LI-GBH36V-GBH36V-LI-Compact_W0QQitemZ190322968472QQcmdZViewItemQQptZUK_Home_Garden_PowerTools_SM?hash=item2c50220798&_trksid=p3286.c0.m14&_trkparms=65%3A3|66%3A2|39%3A1|293%3A1|294%3A50
It is a GBH36 and has...
Following on from my questions about DIN rail terminals, I've decided that the best approach would be to replace all of them and install a small Consumer Unit on the boat. At the same time I will move the main breaker off the DIN rail and into the CU. I need room for 8 modules in total, but to...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc