connection

Recent contents Top users
  1. IBRAHIM HAMEED

    Earth Leakage Relay connection with normal CT

    Hi Can I connect normal Current Transformers (CT) instead of Core Balance Current Transformers (CBCT) to Earth Leakage Relay.. Thanks
  2. A

    Shower overheating no loose connection

    Hi all. Shower has melted on top left corner. I thought it would likely be a loose connections on the feed. On taking the cover off the 10mm coming in and connector block looks fine and is tight and I soon realised the burn Mark is from the live going from the block up to the top of the...
  3. B

    Cooker connection to 13A socket

    I am in the process of buying a new Bosch Serie 4 HBS534BS0B. Total connected load electric: 2.99 KW. AO who I am buying it from state that it can be connected to a 13A socket other seller are saying it is 13 Amp (Requires hardwiring to a fused spur). There is a 13A socket already there that...
  4. S

    Neutral connection to heating programmer

    gas engineer can't fit new heating programmer as I need a neutral connection on the back plate. Advised to get an electrician. How much would this cost or would it be better getting a new heating system?
    • Susan Gillespie
    • Thread
    • connection heating neutral programmer
    • Replies: 7
    • Forum: UK Electrical Forum
  5. P

    Non-Electrician: Switch Fused Connection Unit Light Not Working

    The neon light on my flat-plate/switched fused connection unit doesn't come on when I use the washing machine. The machine still works - but does the fact that the light doesn't come on mean something is wrong? Do I need to get an electrician in?
  6. N

    Baxi 600 electrical connection

    Howdy - first post and need some advice. Baxi 630 boiler To start with i am not qualified in anything and i know the wiring in the photo is from the 90s. Please bear with me.... We had a new boiler fitted a couple of weeks ago by a certified gas engineer. He was a sub of my builder. At the...
  7. I

    Honeywell 2 amp fused connection unit

    Just a quick questiin can i use a 3 amp for a 2A fused connection unit the factory manuel is saying 2 amp full stop is this 100% or can i use a 3 amp i would of thought this would be sufficiant and then wired to a 6 amp breaker? Never done a alarm system before so making sure as dont want to pop...
  8. N

    Emergency spots, connection advice

    Hi all, A client has kindly changed their mind on the emergency light they are using. They want to me to install these https://www.channelsafety.co.uk/emergency-lighting/all-led-downlight-products/glade-1w-led-downlight/ I’ve used these quite a lot and I’m most casss they are a good job, I...
    • Nightfox122
    • Thread
    • advice connection emergency spots
    • Replies: 9
    • Forum: UK Electrical Forum
  9. oracle

    Cooker connected to unfused connection unit with 6mm twin and earth

    Today I found a free standing cooker connected with T&E cable. Since the cooker is bordered by cupboards it is regularly pulled forward about a metre for cleaning the unit and the floor beneath it. This forward movement extends the cable to full stretch while pushing it back makes it hang in a...
  10. Gareth

    Ignition Switch Connection Woes

    I'm building a seven type car and using a Mitsubishi Galant steering column with light stalk and ignition switch. Lights indicators are all sorted but the ignition has me scratching my head. In the picture obviously wires 3 and 4 are the feeds (both black with silver band). So 5 will be...
  11. DeanoRN

    fused connection spur tripping RCD

    Hi all I have question if i may, i changed the face plates on the neighbours sockets and other kitchen appliances to new chrome ones and it all went well, checked everything no problems now a week later the spur for the under cabinet lights is tripping the RCD, i never had anything to do with...
  12. Gary Tollison

    Fused connection unit mounted on metal backbox

    greetings :) I’m taking a spur from a ring final. A fused connection unit will be controlling the spur. FCU will be mounted on a metal backbox flush in a brick wall. I’m planning on using a junction box to break into the RFC, and taking the spur cable to the FCU. My question is, do both cables...
  13. G

    Pedestal Fan - bypass speed control unit - Direct connection

    Hi, The speed controller on my pedestal fan is broken and I thought of bypassing it by connecting the power supply directly to the fan motor. When I opened casing, I found two wires (Blue and Brown) coming in from the plugs end and four wires (Red, Black, Blue and White) coming from the motor...
    • ggl
    • Thread
    • bypass connection control direct fan speed unit
    • Replies: 5
    • Forum: UK Electrical Forum
  14. O

    Multi point BT cable connection

    ok, I slipped up when refurbishing our house and now need to connect 4 Bt cables together , in the loft. What is the best type of JB to use? Thanks
    • Octopus
    • Thread
    • cable connection multi point
    • Replies: 15
    • Forum: UK Electrical Forum
  15. S

    SMA Sunnyboy 4000-TL 20 PE connection missing(9)

    I have had a Sunnyboy 4000-TL 20 for 7 years now and I am getting an error every few minutes which is PE connection missing (9) I have a Sunny Beam monitor which shows the power going up in a nice curve on a very sunny day but the power seems to drop when the system is generating more than...
  16. P

    Connection to static caravan

    Was having a look around local caravan dealers today, and as I know lots of you want to know the correct way to run a supply to a static caravan, I thought you might be interested in the attached photo which shows how a professional would do it! Also you also don't need the installation on a...
  17. V

    Induction hob connection and switch

    My kitchen was rewired last year and I had the electrician run a cooker circuit "just in case" as I was using a gas cooker. He terminated it in a double socket. Now I'm redoing my kitchen and would like to fit an induction hob (7.4 kW) and a single electric oven below (2-3 kW). The double...
  18. Dave Edwards

    Increasing PV panels on a single phase grid connection

    Someone is connected to the grid with single phase supply and they have a 4kW PV array directly connected. They want to increase their PV generation, and add another 4kW. I keep reading that if you generate more than 4kW you need a "3 phase inverter to split the load". But I can't find out...
  19. Lenny

    PT Connection To Pump

    Hi all. Could someone please confirm where to connect a 4-20mA pressure transducer to AI2 in the attached photo. I believe it’s terminals 7 & 8 but the pump is not responding at all. Thanks.
  20. R

    Electrical connection to shed

    This is possibly quite simple. I am not an electrician but am good at digging holes, I need electric running to my shed so I can put a freezer in it, how deep should the trench be (I am guessing 2 spits depth) so I can cut the most labour intensive part of the job as much as possible...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

TrueNAS JBOD Storage Server

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
Back
Top