Is this a common requirement for a dimmable light switch?...
I know there's push on/off dimmer switches, but it seems inevitable to me that the dimmer setting changes a little (i.e. the knob rotates a bit) whenever it's switched on/off.
I want the lighting level to be controllable (i.e...
Hello,
I am okay with DIY Canadian Electrical but not Australian. I am trying to install a dimmer in my bedroom. The powerpoint has a ceiling fan control and a switch for the current LED lights. The dimmer I am looking to install for the light has two wires off the back and looking to learn...
Evening all
I went to someone's house today to look at a lighting circuit for them that's is tripping rcd. While there on a circuit as far as I can make out at moment that is not interconnected in anyway to offending circuit they have 230v at a switch between switch feed and what I think should...
Hi guys I ran Into a problem the other day on a job and was looking for some advice. A client I was doing work for had 19 x Mr16 halogen downlights installed. 5 work of 1 x dimmer and 14 work of another dimmer / 2way switch. As half the transformers were faulty I cut them out and installed 5W...
Just moved home. Does anyone have any information on this switch. It looks like a dimmer. Its feeding 3 sets of halogen spots but isn't working properly. Bright then dark etc etc. I cant find any info on it anywhere. Please help.
I have installed a few QURW01 Quinetic 1 Amp WiFi Wireless Switch Receiver for Dimmer Switches in my home. Initially I had a problem with one low voltage (12v) ceiling light which turned out to be caused by exceeding the 1Amp maximum load, so I'm familiar with that limit. Recently, I installed...
I want to set up a simple plugged in to socket cable with dimmer switch box in the middle and a straight batten with bulb in for some bulb photography i need to do. I have a plug, two core wire, dimmer switch with box to encase it and a straight batten. Want to be able to dim bulb low. Can...
I put in led high hats in my soffit outside. They are operated by a timer switch. The problem is the lights are too bright. I want to add a dimmer switch to tone down the brightness. I tried to do it myself by adding a dimmer switch in between timer and lights. I tried all combinations...
I have an Elko 315 GLE dimmer rated for 20-300W controlling two ceiling lamps.
Before they used to be lamps with fixed LEDs, but they were flickering a bit and eventually one of them broke, so I replaced both lamps with IKEA Årstid which take 3 x E27 LED bulbs each.
I used some cheap 5.5 W...
Morning chaps!
Advice needed please. Is there a tried and tested combination of manufacturer(s) for reducing the annoying buzz from dimmer connected (dimmable!) LED lamps?
In the particular example I am having right now, I have 5 lamps on one dimmer switch, 3x ES and 2x SES. One or more of...
I have moved into a new house and switches are Clipsal dimmer switches, which I cannot find online, so assume they are end of life. See attached.
They appear to be programmable, but how and for what, I do not know. So have the following questions:
a) What model are they?
b) Is there a manual...
Hi all,
The dimmer push button still works but the dimmer stopped working when i turn the button, i heard a pop noise and it was then when it stopped working.
This is the second dimmer now and it has happened to both of them, not straight away, each one lasted about 4-5 weeks.
I wonder if...
looking for any ideas please. I have a customer that is turning 3m x 3m of his garage into a room that is gonna house reptiles and fish. He would like if at all possible to have an LED dimmable strip light that could operate on a timer, but with the added function of when the timer kicks in the...
Hi all,
I'm a bit of a novice when it comes to light switches but managed to wire a single normal switch a few years back so thought I'd be okay with tackling this job but in truth I can't work out where to start!
The issue is that in our living room we have a double dimmer switch but the...
Long story short i had a friend helping me out with some DIY today and I have realised that he left the wiring like pictured. I have and voltage tester so i have worked out that the middle red wire is the live one.
Long story short they are now not working (i have tried some variations based...
Hey folks,
I just wanted to check something. I have 3 x 4W LED light bulbs on a 400W dimmer switch. I’ve read all this stuff about making sure the dimmer Wattage is right for the LED bulbs but it doesn’t say anything about the dimmer Watts being to high? Would this affect the Bulbs?
They...
Hi all. I've bought couple of LED tape kits which come with a 3pin 12v transformer. one of them is now wired into a simple circuit which is a single on/off switch and works great.
the second set is to go into another room, again single switch but this time it's a dimmer not toggle. The kit is...
As in the title.
The varilight V-pro and MK intelligent dimmer both say they can dim up to a maximum of 10 LED's. Why can they dim no more, even if the maximum wattage is not reached? I can find no explanation on their sites.
Zano produce a dimmer which can dim a much higher amount of LED's...
Afternoon, i just replaced light switch with click vpsv140 dimmer switch alongside megaman led 40W bulb.
If i have the switch midway, bulb flickers and i can hear electrical buz. Tugg test, cables secure so its not a loose connection.
Switch all the way up/down perfectly fine. No noise...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc