eic | Page 2

eic

Recent contents View information Top users
  1. M

    Amended to date on EIC

    Maybe a simple answer to a stupid question but now that amendment 2 is here, am I to put the 'amended to' date as 2022? Others have told me to put 2018? Cheers
  2. K

    C2 rating on EICR test report

    Hello Everyone, We are looking to buy this house but the EICR report have a couple of C2's. Any help advice on these is much appreciated. 5.11 - Provision of additional protection by RCD not exceeding 30mA For mobile equipment not exceeding a rating of 32 A for outdoor use only 8.0...
  3. cliffed

    Rcd tripping times on EIC

    Testing Rcd trip times would you write down 28.4ms or 28ms If say 28.6 would you write down 29ms.
  4. B

    EIC vs EICR advice please...

    Hello, I have a question regarding certification if anyone can constructively help please... I am a registered domestic installer (looking to go AC very soon).. I've been asked by a landlord to install a new CU in one of his properties connecting to existing cables (tested of course)... I've...
  5. NICKYNUNN

    EIC or MINOR WORKS?

    HI EVERYONE, IF I ADD A RADIAL CIRCUIT OF 2 SOCKETS , 5 METER RUN IN 4MM FLEX CONTAINED IN CONUIT AND TRUNKING, AND TERMINATE IT IN AN EXISTING 32AMP MCB WHICH SERVES A RING CIRCUIT, DOES IT WARRANT A MINOR WORKS OR EIC CERT? I UNDERSTAND THAT IF I PUT IT ON ITS OWN BREAKER IT WOULD BE AN EIC ...
  6. Marti

    Napit versus NIC EIC? Napit support is nonexistent, so is NIC EIC any better?

    Hi There, Expect this is an old question. I'm currently with Napit. Chose them because their Code-breakers is such a useful tool. However, their on-line Notifications facility is not working and I've spent two days chasing their support office to no effect. Any of you folk had a better...
  7. T

    EIC particulars of installation referred to in certificate

    Hi All I need help with completing EIC. The section i cant quite grasp is where for asks for particulars of installation referred to in certificate. I am installing 2 new radial circuits but not sure what to fill in on form. Im working on a large job where the origin is fed from a 3000A ACB...
  8. Rockingit

    What category of building on an EIC?

    This has me a little bit stumped. Recently installed a BNO system into a building which will eventually become some flats, so that's basically intake to a Ryefield and some 3ph landlord stuff. ALL of it is either in a main electrical cupboard in a lobby or outside of an individual dwelling...
  9. P

    Setting limitations on eic

    Hi looking for friendly advice went to a property today, has a 32a breaker that feed downstairs sockets and upstairs socket. Now the cables are consist of ali multi braided I've advised that the they have a new downstairs ring and upstairs ring wired and old to be non existent now they require...
  10. Simon-0116

    Stroma Certification Scheme Eic not recognised- qualification

    Carried out a db replacement and obliviousy tested house, sockets off lights down etc a proper test. Issued a Eic but estate agent want a eicr to rent property. So I'm registed with stroma as domestic / industrial etc . But not to do eicr. As never took 2391. I've got c+g 2360 level 3...
  11. cliffed

    Part 9 of the EIC

    What’s your take on the filling out of Part 9 Shedule of items tested on an EIC. You’ve just fitted a DB in a large premises,you have only limited information on the electrical system. The mains intake consists of a MPB, a MCCB, supplies this DB your replacing. With limited details of the...
  12. H

    Supply parameters for EIC

    Hi, I’m after a bit of advice with regard to completion of part of the “supply & particulars” section of an EIC for a slightly unusual domestic property. There is a 3 phase supply to a detached building on site, from where L1 is used to supply three separate single phase consumer units...
  13. G

    EIC and EICR issues

    Hi folks, first time poster and soon-to-be landlord's assistant (letting my partner's property out now that she's moved in). We've just had a new consumer unit installed and an EIC produced for the works as required, and the electrician told us he checked every socket and circuit as part of his...
  14. O

    EIC as EICR

    Hi all, My friend has rented a property and I assume a spark has been called by the estate agents to do an EICR, my mate noticed that none of the sockets have come off the wall as they have been painted over. He just sent me the paperwork he got when he rented the property and he has issued an...
  15. S

    EIC to local council out of date??

    Hi after Issuing a EIC to a builder for electrical work(New ring and lighting to a kitchen extension,plus a new Ccu,) what would be a reasonable time that the builder should issue the certificate to the local council .He has only just done it but the cert was issued 18 months ago and the council...
  16. EastCoastPete

    Lead sheathed 2 core lighting circuits /EIC

    Evening All, I'm changing a CU from rewirable to 6 x RCBO in a Victorian flat. The two lighting circuits are lead sheathed 2 core, they appear physically undamaged though I've yet to test them but is this an automatic EIC fail? The switches and pendants are all plastic. Thanks for any pointers, Pete
  17. M

    UK Eicr and eic

    Does a new installation need an eicr, if its to be a rental property, when it has a eic?
  18. R

    Nic Eic assessment

    I’ve got my First Nic assessment coming up, the installation I’m proposing is an outside socket radial on 20 amp breaker and an outside light, my worry is the c/u is a plastic Crabtree about 10 yrs old, will this be ok ?
  19. S

    NICEIC Certification Scheme Can i issue an EIC?!

    Hi lads, Im new to the forum but have a question I think i already know the answer to. Ive been a qualified electrician for 10 years now, work as a sole trader for a few different people every year, ranging from new build housing to shop fitting ect. My question is... My sister needs her...
  20. D

    NICEIC Certification Scheme Terminate NIC EIC membership

    HI - I am currently registered with the NIC EIC - Domestic installer, which also includes the Part P certification. I am muling over the idea of terminating the membership, but I wish to remain Part P registered in order to still practice legally. Is this possible and how do i go about it...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top