electrical tools

  1. Midwest

    Replacement Consumer Unit Manufactuers Pros & Cons

    I would like your opinions of different makes of CU's. I'm converting my garage to a habitable room, Cinema room to be precise. The CU will remain in the garage, albeit moved slightly. The current one is a Hager dual RCD. However, the RCD is type AC and I would like to change to RCBO's. I'm also...
  2. T

    Cable tracers

    What works in your experience? Have been presented a basket case of a high spec finished new build house to find some missing ends, above ceilings etc used a metrel 2093 https://www.metrel.co.uk/uk/shop/EIS/other-instruments-adapters-accessories/mi-2093.html for years but have always found...
  3. Gaz92552

    What timed fcu do you use?

    I was just wondering what timed FCU people use? Ive been using the Greenbrook T205-SCR but recently had one fail on me after less than a year. After looking at reviews I'm not too keen on putting the same in again. Ive seen the T206-SCR for sale which I'm assuming is the newer model. Its...
  4. J

    Glands for 1.5mm armoured cable

    Hi, I was wondering if anyone knew which size gland to use for a 1.5mm armoured cable. It has an outer diameter of 12-13mm. I've used 20mm compression glands on hi tuff cable, but i remember the cable would go through. So just wanted to make sure this time. Thanks
  5. W

    Are these safe? - EU plug to UK

    Hi, I've got some EU plugs where you can't simply replace them with a UK one as well as a toothbrush which has two prongs Would this be safe for an EU charger? - Pretty much exactly as pictured https://www.aliexpress.com/item/33002424658.html?spm=a2g0s.9042311.0.0.22454c4d3RMPYM Or this for a...
  6. T

    Can anyone recommend an inexpensive good earth leakage clamp meter

    Can anyone recommend an inexpensive good earth leakage clamp meter
  7. T

    No Trip 2 Wire MFTs

    Hi folks, my Fluke 1652 has finally given up. I need a replacement quick. I want to try and future proof the purchase a little by making sure the replacement does 2 wire no trip testing. Do any of the current Flukes do this? What are the options these days? I'd not given any thought to it all...
  8. S

    High no trip earth loop readings

    Hi, I'm buying a new test kit and was wondering if anyone had a problem with non trip earth loop readings? This was taken on the same installation- new mk sentry split load rccb CU. I've got a secondhand, calibrated megger 1711 MFT which I've taken readings on a ring = 1.04 ohms And...
  9. W

    Gu10 compact down lighters.

    I’m about to rewire my house and I’m on the hunt for some recommendations. I want some gu10 downlighters but unsure what to go for, having not installed any for about 7 years I’m not down with the current market. I’m looking for something that’s compact, fire rated, decent terminals...
  10. T

    MFT recommendations

    Hi all. Looking at buying a new mft. Currently using a Fluke 1652c, nothing wrong with it but looking for something newer. It will mostly be for testing in domestic & commericial settings so regular testers will know the sort of features im looking for. Its silly little things with my current...
  11. Pete999

    Metholated spirit burners

    Any of the Older members remember these burners, used for soldering etc?
  12. S

    Hole saw advice

    Hi, when using a hole saw for downlights etc., I use the DADE. The problem I have is that the arbour is very short so my drill only just bites down. What does everyone else use with the DADE? I’ve seen videos where the arbour seems quite long and plenty of length for the drill but wondered which...
  13. R

    New Hammer

    I’m looking to purchase a new hammer due to my old one breaking. I’ve seen Wiha do an electricians hammer but I don’t know what they are like. Any recommendations? I do like the Dewalt one.
  14. D

    New MFT - opinions

    Well I thought it was time to get a new MFT as the old one was 20yrs plus it got nicked too.. After a peruse and some tinterweb research I have opted for a Megger 1741 and it has arrived and first impression are pleasing, just wondered if anyone else has this particular model and what they...
  15. M

    Trunking size estimate ???

    Hi, does anyone think they know this size of this trunking just from the image. The conduit is 20mm. 1590221619 I believe it's schneider trunking.
  16. ferg

    Compound mitre saw.

    It's not really an electrical question but I'm struggling to find unbiased reviews. I'm looking to get a decent sliding compound mitre saw for personal use. Woodworking is a hobby of mine and I also have a bit of renovation work to do in the house. I have in mind this one Makita LS1018LN I'm...
  17. Midwest

    Colour change Festoon Lighting

    Trying to source some Led RGBW Festoon Lighting like this RGBW Colour Change Harness, which is out of stock at the moment. Its for a temporary marque. Been googling today, but can't seem to find anything other than led strip, or expensive stuff for Blackpool Illuminations. Anybody come across...
  18. Elecmox

    Crimping tool

    Can I use this crimping tool for spade insulated and non-insulated terminals? https://ibb.co/bdRxvTm
  19. A

    Has someone some exploded views of the N20, N40 and N80 rotary cam switches from Telux (Benedict & Jäger)? Where could I found them?

    Greetings! I'm looking some exploded views of the N20, N40 and N80 rotary cam switches from Telux (Benedict & Jäger). Some of my customers tried to repair their switches and there are some parts missing, so I'm looking for part numbers and their exploded view. If you can share the information or...
  20. C

    Conduit Compression Glands

    Hi All Where do you guys get your PVC Conduit compression glands from - I.e if you were to wire a pre-wired floodlight? I've seen some installations where you can just push a gland fitting directly into one of the legs of a 2-way/right angled junction boxes but I've not been lucky enough to...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top