fitted | Page 8

fitted

Recent contents View information Top users
  1. E

    Portable Appliances Fitted With IEC 60309 "Commando Plugs"

    Afternoon all, I require some wisdom from the fountain of knowledge that is electricians forums. Last week I was carrying out portable appliance testing in an a factory that I carry out alot of work in, The factory floor has been wired with IEC 60309 sockets throughout, all fine so far...
  2. C

    2 showers off of 1 supply?

    I have a customer who has an existing electric shower fed by 10mm t&e, cable is buired in wall(plasterboard) fitted when house was built approx 13 years ago. They now want another electric shower fitted to the ensuite but does not want the house torn apart to run a new cable and doesnt want...
  3. A

    Eicr

    Hi I am in the process of doing a EICR on a small industrial unit and have hit a problem. There is no emergency lighting in place and no fire alarm system. It is a small warehouse with offices and although this is going to be listed in a letter with a few other things would you leave this off...
  4. P

    Fuse Size

    Hi Guys. What exactly is the 13Amp plug fuse protecting? Appliance or cable? I often come across 13 Amp fuses that are clearly original supply but should IMHO be 5 0r 3 Amp. Typically this occurs on Fridges and Vacuum Cleaners.So I change it acording to the running current (and considering...
  5. S

    LED GU10s

    Hi all what gu10s lamps are you guys recommending at the moment to replicate the output of a 50w halogen? i have fitted a few Eterna 5w surface mount diode lamps recently but they are circa 12 quid. Got a job on where I need to replace 30 lamps only soon to existing fitting. want to give the...
  6. T

    Flex to a fused spur

    Hello all, Can anyone help with my query please. If a fused spur has been installed by an electrician, tested and the relevant certificate filled out, can an alarm engineer connect an intruder panel to the spur using flex. I am being told by a colleague this has to be done by an electrician...
  7. S

    Showers

    Where in the regs does it state that an electric shower requires individual dp isolation, ie a 50A pullcord. The circuit is protected by DP 30mA 63A RCD and 40A SP MCB at the main board. Reason for asking, i fitted new CU (due to fire damage) and done away with the separate RCD that had been...
  8. P

    Two fuseboard fitted with new installations - i need two certyficates ?

    hi just quick question, i have new installations, and i expect electricial for testing and give certyficate, but i have two fuseboard, i have one supplier head split for both so i need two separate certyficate or its possible put on test results from both for one certyficate ? thanks
  9. K

    New CU Fitted a few teething Issues to sort.

    Had a new CU fitted at the weekend. But there where a few teething issues to sort out. First one was the garage kept tripping the electrics out, so the electrican put it on a none RCD protected curcuit. This not an issue for me atm as im having that redone at some point as a workshop. The...
  10. S

    W/c fill valve washer

    Hi all, just replaced the washer on my full valve. All works ok but is there a particular way these should be fitted due to the cross/nipple seen on the picture? I have taken pictures of both sides. Hope this makes sense!
  11. Worcester

    Deemed Output - you may lose it if you have a Smart Meter fitted later on.

    Until a few days ago, I had assumed that if you'd signed up for FiTs with no export meter (<30kWp), then you got deemed output and go paid 50% of what you generated for export. Bearing in mind that MOST people actually export more than 50% (even the 2.5kWp systems) because it is difficult to...
  12. G

    PIR question

    Hi all, first post so take it easy people :) I've fitted low voltage lighting (MR11) to the runners up my stairs, I've fitted a Pir to switch them, the problem is that the only position that a pir an be fitted to pick up movement from the top and bottom of the stairs is on a wall at shoulder...
  13. C

    As fitted drawings help

    Hi All, Just did a small commercial job, Salon, entrance level, basement & 1st floor, 2 further floors 2 & 3 needed just light & emg lighting as not being used! Anyway am now being asked for pdf as fitted drawings! Anyone know the rules/regs here! Maybe my fault as I am so knew & having to...
  14. S

    Humidifan Installation

    Good Evening, I have the opportunity to secure a new client and want to be on the ball with them as it could lead to alot of repeat work....so here goes. Do you guys have an opinion on products for what I have been asked to quote for on a job? The quote is to supply and fit a 4" humidifan...
  15. E

    Voltage elcb

    anyone got a recomendation for this, (usual case not wanting to spend) swap an existing socket for fcu for new boiler, no bonding to gas/water against regs but velcb on tt so installing bonding could render the elcb useless making the install worse than what it is. so two options: swap socket...
  16. G

    Fan in bathroom listed building

    Hi all, customer want a fan in the bathroom of her house trouble is its a listed building so we cant go though the wall or penetrate the slate roof. any ideas in this situation, she did ask if she could duct it to the bedroom but i advised against this. cheers Grand
  17. Baker1988

    shower fitted by friend

    hi all just a quick question my girlfriend dad has just had a shower fitted cos his old one has broke (just a like for like)it was just a friend of his who did it for him dont think he is a spark just had some experiance i have checked it at the request of my girlfriend as she does not trust her...
  18. S

    DNO to install an isolator

    Hello to all the good people out there. I have a fuse board upgrade to do soon and have told the customer that I need to get an isolator fitted. Its TNCS, 100A bs1361 fuse, 25mm tails, 16mm earth, 10mm bonding. My questions are: Who call the dno and who picks up the bill? And if the tails...
  19. P

    Wylex RCD's

    Hi, My name is Phil and I am based in Warwickshire, whilst I have many years of experience in the electrical industry I have recently come across a problem that I cannot recall seeing before. I installed some new fluorescent fittings in the local community hall and upon carrying out a Zs reading...
  20. S

    For sale, citroen berlingo 1.9d

    Hi, 55 plate citroen Berlingo for sale, 98000 diesel 1.9D, immaculate condition inside & out, f.s.h just serviced, new full exhaust system fitted. tax 5mths & mot 12 months. comes with roof bars, plylined, carpet, and racking. which is all as new. Area Durham Price £2150.00

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top