My wife is planning to have a dog grooming business in a spare room in our house. It is 2.6m x 2.8m. It will have a dog bath in one corner with an electric shower fitted to the wall nearby. Much like this...
I know if I have a shower in this room that I cannot have any socket outlets due to...
got a job fitting a pir near side of road (4 metres away) to contol 2 led floods any tips to avoid cars or pushbikes setting it off ,i can point it down and buy one with sensitivity control but any other tips please
I'm your average DIYer and after advice about replacing a pendant light with a new flush metal fitting. I can fix the new light to the ceiling and the existing rose sits within the void of the new fitting without any clearance issues. Is it OK to leave it in place and wire the new fitting into...
Hi,
This afternoon, finished re-emulsioning a plasterboard ceiling in a 25-y-o house (so the electrics are modern enough).
I had removed a circular metal light fitting - the swivel 3-spotlight type of thing - but it uses modern LED bulbs. Never ever had a problem with it. The wiring is solidly...
Hello,
I have an S14s light fitting in a large cupboard with a pull cord attached to the fitting. It wasn't working so I got a new bulb (Architectural LED Strip Light 6W Opal 500mm S14s Bell) , but it now looks like its the actual fitting that is defective as the new bulb works fine in the same...
Hi...I want to fit extractor fans in our en-suite and main bathroom. These are not going above a shower or bath but in the centre of the room. The lighting ring is accessible in the loft space for the power and I'm competent at electrical work (although electronics is my trade). So can I do this...
Hi I’m Paul I always thought I was reasonably competent at doing the easy stuff until yesterday when I tried to put a new light up, this is the first fitting I’ve tried since the house was rewired (by professionals, not me lol) and the wiring at the fitting seems to be some sort of loop. As you...
Hello all, I've just moved into a new flat. It's only about 6 years old, so a pretty new build.
The hallway and 2 living area light fittings are standard B22 lights, but the 2 bedrooms have a weird fitting that looks more like the sort you plug a halogen bulb into, like a GU10 bulb, only they...
Hi - I'd appreciate some advice please. I've just replaced all our G9 Halogen bulbs in the fittings in our living room to LED versions - 16 in total. The fittings are called Tugel (Dar Tugel 6 Arm Semi-Flush Ceiling Light - Satin Chrome - Lighting Direct -...
hi guys I’m new to the forum, I’ve tried to find an answer to my issue but so far no real luck.
I have a new light fitting it’s a 5 light fitting with G4 lamps. It says on it “G4 5x max 20W halogen”
It’s got a transformer with an output of 11.5 Vac max:105W eff: 8.75A
I have fitted 5x 2.2W...
First off I'll say I'm not an electrician at all, I'm just a guy who bought a house and tried to fit new lights in the hallway. So I found that out of the two light sockets, one had the usual three wires (blue, brown and yellow/green) whilst the other had two of each of those wires, so 6 in...
Didn't take a photo. I should have. Typical, I tried to change the light fitting DIY jobbie gone wrong. I really wanted to say something sarky or witty but he was a nice bloke so I didn't.
Mock up of the seven way choc block below. Bless him! He was over the moon when I got most of the rest of...
Hi All, I am installing a new double oven and ceramic hob where a stand alone oven used to be, the oven is rated at 29amp but not sure what the ceramic hob is, current wiring is 10mm from a b40 fuse in the consumer unit to a 45amp cooker switch and plate, I know that I need to change the plate...
I would like to have fitted on the wall above my existing cooker a single compact electric oven. The existing cooker (hob & oven) is electric & non-induction.
Under UK law would this be allowed? and, if so, what is the minium space allowed between the top of the existing cooker & the bottom...
Hi all,
Been to look at these light fittings which all seem to be failing.
They have 2 lamps, one centre spot and a circular tube around the outside, both switched independently.
Does anyone know of a suitable replacement or where I can find the same fittings?
Thanks
hi i have a 12v non battery 1966 lambretta, i want to see if i can wire air horns onto my scooter...the kit comes with a compressor and a relay but when i look at videos on fitting them to cars it says connect to battery, so can these be connected to my 12v non battery lambretta ?
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc