We recently purchased a new fridge and connected it to a different circuit to the one the old fridge used. It keeps tripping the circuit, can anyone advise what may be causing it please?
Hi There.
I've got a customer with an American huge fridge freezer. The interior lamp has gone and she can't find a replacment. It's a 120V 40W lamp, but the cap looks like something in between SES and ES.
Has anyone got any idea of where to get one? I've googled it for hours with no luck...
Morning all,
Did an EICR a couple of weeks ago and one of the things I commented on was the fact that the metal work of an undercounter fridge (the door hinge/skin mounting arrangements) did not have any continuity to the CPC of the circuit supplying it.
I can find no indication of it being a...
Hello Guys. Got a situation here. Installed a 3 phase circuit for a commercial fridge. Bang a 20 amps 3ph Type C MCB at C.U and wired in the fridge via a comando 16a socket. switched on fridge and we rolling. After a week Fridge people turned up to do some more work. Something went wrong and...
I had a customer (doctors) whose DB has an ELCB main switch which tripped over night causeing a fridge which is plugged into the ring main to be off and ruined various vaccines. Is there any way to have the fridge isolated from the ring main and ELCB other than install a garage unit RCD for the...
007 Electricians are a fully certified and insured electricians providing professional and reliable electrical services and testing in Coventry, Rugby, Southam, Daventry, Warwick. We make a significant effort in quality management and are well recognised across Warwickshire. From a simple new...
My UK fridge of 5 yrs stopped working. I was told the fridge had blown a fuse so I replaced it myself with a 13A fuse. The fridge started working again from a different socket but when I connected the plug back to the original socket per the photo attached it doesn’t work. Seems like something...
Hi
I am currently out in Africa experiencing horrendous power outages. I therefore have the need to hook up my DEFY combi fridge/freezer (model DEFY DAC512) to a small standalone backup generator from time to time. It is important to have the backup power option as the fridge houses livestock...
Hi could anyone answer this for me. I fitted a new integrated fridge freezer in a kitchen unit. I just received a text from the customer saying that her husband looked under the kick board and seen that part of the fridge cable is trapped under the fridge and that this was dangerous and would...
Hope this is the right location to post.
I asked my friend to give me the motor that he replaced for his fridge.
I checked the 2 terminals with an ohm meter and it showed 470k Ohm.
I then used a megger between the same two terminals at 500V and it showed 0.02M Ohm and 20V (short?)
Could...
My question is about regulations for installation of sockets for built in fridges. I believe that the regulation states that the socket should be accessible and that the common interpretation of this is that the socket is normally placed directly behind the fridge mounted on the the wall with a...
Hello.
Newbie here, signed up to hopefully share any required refrigeration advice I can give. But primarily to ask a DIY question but that forum seems to be locked.
I wonder why lol. How much time and effort is required being freindly before I can ask for advice on my dilemma?
cheers
Slim
Hi Guys
Clarification needed
1. Refrigerated Display cabinet in shop has it's condensor outside. I've been asked to provide a supply to an external isolator. QQ. Should there be an isolator inside the shop near the display unit as well?
2. Air Conditioner in home conservatory - condensor...
I PAT tested a Hotpoint Iced Diamond fridge freezer RFAA52. The CE plate on the back said 150W but the moulded plug said 13Amp. I looked up the instruction book on the Hotpoint web site and it said 13amp. I left the 13 amp fuse in the plug but it just seemed to be wrong. I sent an email to...
Hello,
A quick question to see if others have experienced this:
I was re-positioning some sockets in a kitchen today - I tested the continuity of the ring and found the CPC to be broken somewhere. I found it on a FCU (that I hadn't been working on) where both CPCs were broken off at the entry...
Hi Guys
I had the joy of testing the kitchen appliances in a new rental. The fridge, freezer and washing machine were all free standing under the worktops and couldn't be moved on account of the floor tiling laid down in front of them. Only way to test was at the individual FCUs. I could only...
Hi guys I have a client whos rcbo keeps tripping, never when I am there and at all times day and night.i have stripped circuit down insulation readings all over 200meg ramp test on rcbo is 21ma . should this be higher or is it ok thanks paul
I am wanting to experiment with solar power at home.
I want to try and power my fridge freezer as it is the only thing on at home all day.
Can you advise what kit i need.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc