Looking to purchase a new tester and been speaking to a rep from tis today. I have always used megger, fluke or Kew tech test equipment was wondering if anyone had any experience with the tis meter before I part with my hard earned money lol!
Much appreciated
Mark
Hi
I'm looking or advice on the purchase of my first MFT.
Looking to spend around £450.
Have been considering the Metrel MI 3125 any views on this tester
Evening all..
I will be buying one of the above but am struggling to choose between them both.
I am 70% for the T150 and 30% for the T5.
Lots of people seem to rate the T5.
What I particularly like about the T150 is that the buttons are on the probe so you only need 2 hands for all actions...
Hi, Megger multifuntion tester (i think 1800 series, can't exactly remember) - Error 22 has appeared I think when doing a loop test but i'll have to confirm this. Tester is fairly new (6 months). Any Ideas what it means? Google wasn't much help before anyone asks!!
TIA
Rich
Hi,
I am looking at buying a new multi-tester, I have previously had a megger but am interested in your opinions on the Fluke 1652B or 1653B.
I only carry out domestic work and will be using it to measure the readings required for minor works and installation certs (Ze, Zs RCD trip etc).
I am...
Fluke 1653 multi function tester for sale,bought when i was self employed now working on books with tester supplied so its sat gathering dust. Someone might as well get some use out of it,perfect working order,very little use,calibration cert run out,all leads manual on disk etc and that useful...
Guys,
Need a new set of multi function ladders ideally for stair work and a little platform, if i am hanging over stairs I don't begrudge extra few quid to avoid a cheap pair so I can keep my neck in one piece been recommended these any one used them or got experience cheers in advance...
Hello
I was at a clients yesterday to sort a Galaxy S2 as they had just moved in and had no idea how to use it and change codes ect... anyway, whilst showing them how to use it they was not that happy about the loud double beep that is produced from the internal speaker when it has set...
Im looking to swap my pat tester for a 17th ed MFT.
Ive an Ethos 9300, in excellent condition, comes with case, test lead, a copy of the CoP and some labels/fuses/plugs.
The full spec can be found here: Ethos 9300 Mains Manual Tester - Ethos Security Products
Its also calibrated until...
I use a Dilog 9083P MFT, which was recently calibrated.
Have just finished extending a ring circuit at a customers house. All testing OK until i used the 'auto test' function to test the 30mA RCD at 5 x IʌN @ 0º, the trip time showed >40mS. All other tests were within limits (5 x IʌN @ 180º was...
Hi Guys, selling my Fluke 1651, full working order, all leads, carry case. Needs calibrating.
Selling as my company provide a tester so surplus to requirements.
ebay auction no: 331101855213
bidding starting at £95
Auction ends thursday evening
fitted a new c/u and put a new ring main in kitchen last week ready for my assessment in the morning, everything tested ok and zs tested ok then, sent meter in for calibration check last thursday and picked it up today (megger 1552) certificate says everything passed no adjustment needed, so i...
Hi guys .... and girls,
I am returning to the industry after working in other areas for the last 30 years........ I am time served with MANWEB and have just done my 17th edition regs to re qualify, and I start the 2395 / 2395 this week.
I have been gone so long I don't have contacts in the...
I am installing an AEG HK654200FB 7.4kW induction hob. It will be on its own 6mm radial circuit supplied by a 32a Type B MCB. After reading the manual for this particular hob it says that it has an extra power function which only lasts for a maximum of 10 minutes on each ring which if all were...
Hi
I have fluke 1653b Multi Function Tester for sale
The Tester is new and has never been used.
It comes with all the Leads, Accessories paperwork/ manuals.
I have opened the packagaing as i was intending to keep the tester.
The tester is in...
one like that:
Remote Humidistat Fan Control & Timer
there are connections for switched live, live, there is timer setting, there is humidity setting.
can`t get how this is going to behave when installed.
1. fan on together with light, duration adjustable with timer, but only when humidity...
Has any body had a good experience with multi function pliers....? Ones that strip 1.5mm/2.5mm cable, crimp ferrules, etc etc etc
ive been looking at the draper one but can't decide if it would be a good buy.....?
http://www.amazon.co.uk/Draper-Expert-26482-Insulated-Pliers/dp/B003UGQ8HU
Hi, pretty much as the title suggests, does anybody have any recommendations for a chester/ north wales based repair/calibration service, preferably somewhere I can drop off as opposed to courier, thanks
Right a quick small debate metrel or seaward?
Never worked with a seaward but it does look like a great piece of kit?
Is it time to change or just stick with the one you know?
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc