Hi all,
Hope you are all well and all is good!
Can anyone recommend a nice looking garden light that can be surface mounted with side or bottom entry, e.g. can be retro fitted with surface mounted cabling?
Thanks in advance,
Martin
Hi guys,
my brother is building a bar in his garden that is timber framed and wants some power to it.
The main board in the house has a pme earth and there a no spare ways in the board. From this board there is a 4mm t+e on a 32amp breaker off the rcd side supplying a board in a little out...
Hi guys been a while,
I have a customer asking for quite a large outdoor lighting and power installation
It is going to have a kitchen area built which they want 3 x double sockets and 6 spotlights with a switch
the kitchen will also have a gas cooker
A shed with 2 double sockets and a...
Doing some lights on a back wall that’s being cladded, between the back wall and the garage wall is some stones that I’m going to need to bury cable under to get the cable over to the wall it’s about half a metre across, doing it in armour won’t really work as I would need to go into joint box...
Hi,
Years ago we had a sparky install some 240v garden lighting but to one of the points in the garden that we wanted lighting in he only installed a buried SWA cable and terminated it in a jb because at the time we needed some other work doing in that area before lighting could go in. Anyway...
romford recorder pub electrician - بحث Google - https://www.google.com/search?q=romford+recorder+pub+electrician&rlz=1C1GCEA_enGB822GB822&oq=romford+recorder+pub+electrician&aqs=chrome..69i57j0i22i30j69i64.8373j0j15&sourceid=chrome&ie=UTF-8
Pub owner 'drilled through cables' weeks before child...
Hi,
I’m not an electrician so seeking advice as to whether my requests were actions correctly or if I need to arrange for additional / remedial work to be done.
During the first fix of a renovation I told the electricians working on my project that I planned to put an office / studio in the...
Hi
Could anyone advise...
I have a weatherproof exterior box with an RCD socket inside.
My garden is gully chipped and stoned.
I was hoping to put up 2 post lights and run from a plug in to the RCD socket without having it classed as an installation.
My question is, the 2 lights are 60w...
https://www.thesun.co.uk/news/13807785/boy-7-electrocuted-pub-garden-live-charge-exposed/
Not sure if this has been posted before but it just goes to show that eventually someone does get hurt. We’ve all seen loads of jobs where we wonder how it didn’t kill someone.
The terminology in the...
Hi all.
I'm thinking about adding a garden office and will obviously need power. Can power be taken from a normal plug socket somewhere at the rear of the house, or does it need its own circuit from the main consumer unit? If it needs it's own circuit it's a non starter project as I don;t want...
Hi all,
This is my first post and I am looking for some advice.
I currently have an outside light connected to a fused spur in the house. I am planning to add some LED lights (4 watts each x 7), using a WISKA box for each light fitting, running through conduit with compression glands.
The...
Hi all. New member looking for some advice.
I would like to add some lighting to my garden shed, possibly one or two LED batten type fixtures.
I currently have three garden wall lights, running from the kitchen circuit. Is it possible to just re-route one of these lights via some plastic...
Hi guys, hope you can all help.
I'm moving house soon, and got a few jobs that I need doing. I'm looking at doing them myself (if possible) to save a bit of cash and get done in my own time. I'm not a spark, but have always doing little bits and bobs of my own so am comfortable, however I dont...
Hi there, I want to setup my garden lighting to come on when it's getting dark, but always turn off around 11:30pm.
Obviously in the winter that may mean they come on at 5pm ish, whilst in summer that could be around 9pm I guess. But I don't want to turn them on manually all the time and neither...
Hi All,
Just joined on here, so hi all :)
So i've had my garden landscaped and now i'm looking at lighting, i've bought these lights:
https://www.amazon.co.uk/gp/product/B01C4CKACY/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1
with these bulbs...
We have garden lights fed from a standard consumer unit via SWA cable which we want to convert to low voltage keeping the existing lamp holders but switching to LED lamps.
The plan would be to switch out the existing consumer unit to one containing a transformer adequate to drive all the lamps...
I’m looking for the best method to run a cable from the CCU from the Garage to the 30ma RCD in the Garden.
I am going to order some HiTuff rather than SWA as I can’t get the paving slabs and stones up. Also I’m not sure about drilling into the concrete posts. I have attached some photos for...
I’ve a project at home coming up. Which involves running a feed from the submain board in the garage on the outside as it’s been converted into a room, then along the fence, to a 30ma RCD, which is enclosed in a Weatherproof Box, which has feeds to both the sheds in HiTuff. I’ve been given White...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc