Hi can any one help I have just recently moved into a new shop and it has 2 brand new 6kw commercial heater both heaters are on there own 32amp breaker via a switch
is it possible to put both heaters on a timer so they come on before I get to the shop
Much appreciated if anyone can help...
I have a job to do tomorrow where a unvented direct hot water cylinder was installed just over a year ago. Job came through as no hot water. Anyway I have been there and both immersions are scaled up and faulty so gonna replace them and fit a limescale inhibitor. At the moment its got both...
Hi
I have a customer who lives on the 2nd floor in an upmarket flat in Cambridge. She used to have some kind of hot air vented system for her heating which has now been removed.
She would like to have 2 x decent sized storage heaters fitted with 2 or 3 panel heaters as a top up. At the moment...
Hello Gents,
I need a little advice , I need to connect to oil filled heaters via fused spurs( flex outlets I have use SWA cables - to keep the radial intact is it best to connect the 2 swa into an adaptable box and connect in singles to FSU and back out second armoured feeding...
Evening Gents,
Im looking for some advice, I have to connect two convector heaters on a radial circuit - I will be connecting each outlet via fused spur flex outlet, I was going to use a 3x3 adaptable box to terminate the one armoured then connect in singles to fused spur...
Hi Everyone,
I need some advice on heating control circuits please.
I have 6 single phase 2kw infrared heaters which are fed from 6 individual 15A circuits on a 3 phase distribution board. Each circuit then goes to a local switch next to each heater and then on to the heater itself, and is...
A few days ago while working on something different in a house I came across this leaking immersion which the owner had not noticed. The immersion heater had been changed a week earlier but I could see there was a puddle on floor around it. The plumber who did the original job was called out to...
Does a new circuit feeding heaters in a changing room of a sports pavillion require rcd protection? as the shower room for it has no door and the fixed water outlet is 1.4M away from the nearest heater. so is the changing room part of the location containing a shower? Thanks for any thoughts on...
Hi there reader merry xmas, i got me a puzzle, i have 2 Glen panel heaters in 2 different kids bedrooms upstairs in my house. They are wired to switches ( looking like a light switch rather than a fused spur) and they work when i switch them on ( i do this by using a heating switch in my...
Installing heaters in a milking parlour and he wants them to operate on a time clock? 5 heaters at 2000 watts each. Approx 15m run. Current running through will be around 25 amps. What cable will I use and breaker? Only a single phase board. I was thinking 4mm or 6mm radial on a 32amp mcb. Or...
Does anyone know off the top of their head how to wire a SangamoSchlumberger teleswitch for Eco 7. A diagram would be even better!
Rewiring domestic property where customer originally had storage heaters. The plan was to remove the storage heaters and install C/H. The customer has done a u-turn...
Hi all,
Had a customer who has 2x 1.5kw patio heaters.
He is looking for these to be switched separately, in an ideal world this would be from a 2G Master seal switch.
Now obviously the loading is an issue. I was thinking of maybe using 2x din rail contactors in an enclosure as the db is...
Have a homer to replace old Eco 7 heaters , do you guys know any suitable replacements , they want te be instant heat so don't know weather blow heaters will be two much of a dry heat.
we used new dimplex ones in a bus station recently which were I think 1.5kw which wansnt bad for the size and...
Hi,
I've been asked to install 12 x 2.4kw infared panel heaters in a church. The cable run for the furthest point of the first row of 2 heaters is 44m, next is 40m, 36m, 32m, 28m, 24m. The plan is to have 3 x interlinked thermostats. I've never installed this type of system before and was...
Hello all
I am working for a company and we are installing supplies to some industrial 3 phase heaters in a factory in Devon.
I am questioning the maths used by my boss to arrive at the SWA size to supply these heaters.
Seeing as I am not a wiz with 3 phase stuff (only just started working for...
i am removing my storage heaters as they dont work and i dont like them i know how to get them off and taking apart. what i would like to know is when i have opened the switch covers and removed the ataching wire what do i need to cover the wire that comes out the wall i am leaving the wire in...
I am installing two 2Kw convector heaters in a small flat. The obvious way would be to connect them to the ring, especially since they each have a 13A plug. However 4Kw sounds a lot to me on a ring. Its rather more than an immersion heater! but on the other hand no where near the 7.3Kw for...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc