hob

Recent contents Top users
  1. K

    UK Would you consider these accessorries too close to the hob?

    Hi, i was given measurements from the tenant and they happemed to be slighty wrong. Now iv already ran cables and the plasterer has already done his job. Looking at the pictures the tenant sent me, the accessorries seem a little close to the hob. What can be done now? Do you think its ok as it...
  2. T

    Hob cable?

    Hi everyone, Just connecting a new induction hob, should I use 6mm H07RNF or 4mm H07RNF? The hob rated at 32amps and my mcb is 32a. Many Thanks
  3. T

    Help! With oven and hob wiring

    Hi everyone, Just having new kicthen installed and noticed that they wired 2.5mm HR flex off the cooker switch. The 2.5mm HR flex feeds to a dual cooker outlet which will power a 16amp cooker and a 32amp induction hob. The cooker switch is 6mm cable with a 32amp breaker. Is this okay? Many...
  4. T

    Upgrade gas hob to induction hob

    hello, we have recently brought a new build house and we want to upgrade our gas hob for an induction hob, we have already brought the hob which requires 32AMP and is 7.4KW power our house layout makes it a little tricky and expensive to rewire a new circuit through (which we should have...
    • tempanybailey
    • Thread
    • already build gas hello hob house induction induction hob new new build recently upgrade
    • Replies: 21
    • Forum: UK Electrical Forum
  5. P

    Install plug on hob extractor fan

    Hi When we had the electrics installed for our new kitchen (few months back) we were advised by the electrician at the time to just add a standard plug to the wire of the hob extractor fan (once it was installed). I have finally come to do this, but would like confirmation that it is safe and...
  6. G

    Oven and hob wiring

    Hi all, I have a dedicated cooker circuit on a 6mm cable, 32amp mcb running to cooker switch down to connection plate. I want to install a 1kw ( just under) oven and 6kw hob! Am I ok swapping the connection plate for a dual one and connecting together?? And if so do I run 6mm flex hob to...
  7. R

    Electric Hob and Oven connection, one supply.

    Installation of a cooker in a renovated property, electric oven and a separate induction hob. The hob was to be gas - now with the induction hob, can it be fed from the oven radial via a dual wall outlet? The radial from the Consumer unit is 10mm T + E. The local isolation requirement can be met...
  8. N

    I need some advice on wiring in my new 90cm hob with 2 live wires

    I bought a new hob as we are fitting a new kitchen, we got all the other new appliances wired in, but the hob is a bit more complicated, it has 2 live wires then 1 negative and 1 earth, the wire coming out of the socket where it needs wired into where my old cooker was installed only has 1 live...
  9. R

    Max demand for double oven and hob

    Just some clarification please. Max demand for cooking devices. OSG says 10A + 30% of "connected cooking appliances in excess of 10A + 5A" if a socket is available in the isolator. The oven and hob are two devices. Does the 15A apply to both of them or just the first one? eg: Oven 4.8 kW Hob...
  10. J

    Induction hob for preexisting 4mm T+E

    I have been told by a local spark that one can not run an induction hob on a 4mm T+E. From my understanding, most induction hobs are 7-8kW and "require" 6-10mm T+E but our housebuilder only put 4mm because they are cheap. Or maybe I am cheap for not coughing up £500 for a £150 induction hob...
  11. S

    New Induction Hob

    Hi, I'm replacing an old electric oven with an induction hob. There's an existing cooker 45A cooker switch running on 6mm cable which they've wired up to a standard socket and a plug on the oven. My new hob is rated at 7.3kw and it states to use specific cables for heat safety. I'm looking at...
  12. J

    how hot will it get behind my under bench top oven

    Hope you guys can help, how hot will it get behind my under bench top oven with a hob above on the bench top ? The cable touches the back of the oven from the oven itself and I am sure the hob cable, I believe there is also a plastic junction box back there, could that melt or is the heat less...
  13. N

    Hob or oven isolator switch?

    HELLO I have to install one oven(13amp) and one induction hob (30amp) but those appliances not next to each other!2 meter between them! just i would like to know ,which appliances need localy isolator switch whitin 2 meter?! my plan to put oven isolator switch in the cupboard ,where will be...
  14. B

    Neff hob Error code 5 13

    I'm after some advice. We've just had a new Neff induction hob fitted. Only one side is working. 3 areas have an error code 5 13 on it. I've spoken to Neff and they say the error codes relate to an installation error and won't help but the electrician is adamant it's a faulty hob. They've used...
  15. J

    Why 2 hob ratings per ring

    Hi all. Could someone clarify why there is two hob power ratings on AEG IKB64301FB Electric Induction Hob - Black - https://www.currys.co.uk/gbuk/household-appliances/cooking/hobs/aeg-ikb64301fb-electric-induction-hob-black-10186499-pdt.html Also what would be the total wattage. Hoping this...
  16. R

    Hob Wiring

    I am changing my hob and the old hob has three wires connecting to a terminal block Red (Live) Black (Neutral) and Earth (Green). The new hob has four wires in the cable. Earth (Green) Neutral (Blue) and 2 Live (Black and Pink) which are tagged together. Do I connect the 2 Live wires to the...
  17. A

    Connecting a oven and hob.

    Had a new kitchen fitted and have got a electrical oven and hob both have plugs so draw less than 13 amp,Ive the old cooker point outlet which I want to connect to ,can I install a double socket on this outlet to plug in the oven and hob?
  18. L

    UK Induction Hob Query

    Hi I’ve just had a new kitchen and an induction hob installed which is on its own 32amp rcbo but my question is the total load rating is 7.35 for the induction hob which is just below 32amp if I’ve worked that out properly and it’s fitted to a cooker switch with a socket on which will have...
  19. M

    lamona hja2450 extractor Bulbs blown but fan working

    Does anybody no what else I can do to help rectify the lighting issues. I have tried moving the contacts for the bulbs but no joy. Any help would be greatly appreciated.
  20. Z

    UK Electric Hob Diversity.

    Hi colleagues A friend of mine has purchased this electric hob for his kitchen. https://ao.com/product/bhii6015-baumatic-induction-hob-black-47830-39.aspx It shows on the spec that it has to be hard wired by a spark. So after calculating the amperage (5400÷230), I'm getting 23.4amps...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

TrueNAS JBOD Storage Server

UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top