installation

  1. Designmen90

    PE Busbar installation

    Hello guys, here I have one interesting picture from site. I saw one DB so I opened the door. What I see just confused me. The pictures are attached. If you take a closer look, you will see that this busbar is installed on few nuts. Is this allowed? Anyway, if there is situation where busbar...
  2. D

    2 Meters 2 CU Smart Meter Installation

    Hi, Currently We have 2 meters and each meter is connected to 2 CU. We are looking to upgrade to a smart meter. At the moment OVO have no slots for my area however, when I do get a slot they will replace 1 of the meters and remove the other they bit I'm not sure about is how will the 2nd CU...
  3. G

    My weekly Foru-Blog! EAL L2 Diploma Elec Installation (nights)!

    Hi All, Thought, I should work on a weekly or bi-weekly forum blog on my work through the EAL L2 Dip in Elec Installations course. I have been posting or trying to post on a regular basis, so thought, why not committ and do a weekly/bi-weekly post, where all trainees can join in and add to...
  4. L

    Ring Video Doorbell Pro installation - wiring advice

    Hello everyone. I have just purchased a Ring Video Doorbell Pro and want to install it as follows as below. For complete disclosure, I am not a qualified electrician but a responsible and experienced DIYer who wouldn't undertake work I felt was dangerous, and always check the regs to make sure...
  5. J

    Insulation resistance on new installation

    I have recently completed a rewire as part of a complete back to brick renovation in a pretty standard domestic property. Upon carrying out initial verification I uncovered a few strange IR readings. Multiple circuits with low(ish) readings of around 150-200Mohm. However they all tended to rise...
  6. J

    Maytag CWE8700ACB installation question?

    I recently purchased an old Maytag CWE7800ACB double wall oven from Habitat For Humanity, it's a 240V hardwired oven connection. Is it possible to use an existing 240V circuit that used to be an electric dryer connection? For reference, this house was built in 1927 so the existing 240V circuit...
  7. clairemc3

    Installation of plug socket under towel rail safe?

    Hello! My partner and I have recently moved into a home, and I've just noticed there is a plug underneath the towel rail in the cupboard under the stairs (photo here https://drive.google.com/file/d/1FGakJWLf5a_XiJy879wBySC0EMd4jmD-/view) We haven't been using the towel rail much as its a bit of...
  8. E

    I have a vertical installation of a 10 ft 3" PVC conduit Schedule 40

    1. I have a vertical installation of a 10 ft 3" PVC conduit Schedule 40, weather head, 45 degree elbows. Do I have to glued these commodities? 2. I plan to install 400 ft of underground 2" PVC conduit at 36" deep on a farm. there are no buildings or structures on top. there is just...
    • Eliram
    • Thread
    • conduit degree installation pvc schedule screwfix these weather
    • Replies: 1
    • Forum: UK Electrical Forum
  9. Designmen90

    DB installation height

    Hello everyone, is there any rule/normative which defines the height of installation (from floor to bottom of DB) of wall mounted Distribution Board?
  10. C

    Lazy Spa installation

    I’ve just had an NICEIC assessment and he’s picked me up on a lazy spa being connected to an outside socket. The lazy spa comes with a 10mA PRCD, he said I should treat it as a bathroom special location. Surely an outside socket in as outside socket and it’s not up to me what a customer plugs...
  11. W

    Earth size for installation

    Was doing an EICR today and the for the installation was the same size as the tails. 25mm, would this go down as a c3??
  12. Z

    Shocking installation

    I just went on a EICR with my brother in law who is a fully qualified spark. I've just witnessed a whole ring final circuit wired in 1.5mm twin and earth and the cpc's into the back boxes instead of into the sockets. ??? Its absolutely criminal what some people are allowed to get away with...
  13. J

    Panel with Relay and SPD, Installation?

    Hello and thanks for the interest. I have a little dilemma and was unable to get an answer anywhere. I'm trying to fit a SPD and an over/under voltage protector to my existing "Main Switch" and "RCD" setup. my question: is the location of the SPD and surge protector correct? thanks
  14. K

    UK Installation electrician requirements

    Hi All. I was just after some advice. After working in industry for a fair time, I’m now looking to break into the domestic installation side. I have most qualifications required but my NVQ Level 3 is in electrical maintenance. This is affecting my gold card. Any ideas of what’s required to...
  15. M

    150mm Aluminium cable installation tips and tricks?

    Hello again Trying to estimate for a project that includes the installation of 16 x 150mm single aluminium cables, which will require bends. I have no experience with this type of cable, could someone please describe the process from the start (where it needs to be removed from its reel and...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Back
Top