keypad | Page 2

keypad

Recent contents View information Top users
  1. Jackflash

    keypad door entry: door won't open.

    HI, Been asked to go look at a keypad door entry system where it has been reported the magnet isn't letting go of the door on input of the code. Apparently a green light on the keypad illuminates on input of the code but door won't release. What's the most likely problem? It will prob be...
  2. K

    HONEYWELL ACCENTA MINI 8SP399A Remote keypad problem

    My first post so I hope I get this right! i have just fitted a Honeywell Accenta mini gen4 with lcd remote keypad for my dad. All seemed to go fine until I tested the system. The initial power up was as the manual suggests and the LCD keypad read "system unset". I then entered P and the...
  3. O

    Scantronic ion-16 alarm system shut down, can't get running again.

    Initially disconnected 4wires on keypad with power switched off at fused spur reconnected wires back in order system failed to reboot blank keypad all fuses checked hav had an electrician look at it but 2 no avail possibly keypad not sure.any help or advice much appreciated thx
  4. driverman

    Fitting remote keypads for burglar alarms

    Afternoon all, I'm first fixing an alarm system............not brought the alarm yet. My question is, can I wire from the alarm panel 2 x remote keypads either separately or via the first keypad then onto the second keypad using 6 core cable. Many years ago i used to Abercus alarms which were...
  5. R

    Honeywell / ADE - Optima and Remote KeyPad

    Hi I have just installed a Optima G4 panel and connected up to a remote Keypad. The alarm works ok however the RKP is displaying the "System Optima G4, Software installed and Build number". I guess l have to activate this. How do you enable the Remote key pad (RKP) from the panel or get this...
  6. L

    Honeywell Galaxy S2 Full Set

    Hello I was at a clients yesterday to sort a Galaxy S2 as they had just moved in and had no idea how to use it and change codes ect... anyway, whilst showing them how to use it they was not that happy about the loud double beep that is produced from the internal speaker when it has set...
  7. T

    Eurosec Alarm, Keypad Problem

    Hi Ive tried to install a Eurosec hard wired alarm at home. My keypad, PIR's and Bellbox are all connected to my control board. Ive attached a wiring diagram to show how ive connected it up. This is my diagram - View image: scan0001 The PIR's detect movement and light up as they should. The...
  8. W

    Veritas R8 keypad

    I have a Veritas alarm fitted with two R8 keypads. One at the front door and one at the back. I want to remove one of the keypads. This has four wires connected. Do I simply disconnect the wires and tape up or is there more to it. Will
  9. carl9254

    Informa Alarm Keypad

    Hello, Doing a bit of work at a car garage and basically he tested his burglar alarm last week and it didnt dial out to his phone as it should do. This is the keypad below, does anybody know of where i could get a manual for this, the phone line is working too so cant be that. Any info...
  10. N

    Accenta G4 - Replacing remote keypad.

    My G4 system is presently fitted with an LED remote keypad. My wife does not find this user friendly so I have purchased a LCD remote keypad. I have asked the original installer to do the replacement for me without success. I know he is employed on new-builds which take up most of his time...
  11. N

    Veritas additional circuits an remote key pad

    I’m looking for some advice on VERITAS 8 alarm panels. I want to add 3 additional zones and remote key pad in my garage, but only have a standard key pad (no display) which looking at the instructions/manual could be a very long winded way of programming the new zones regarding parts sets etc...
  12. G

    Veritas R8 Alarm Problem

    Hi, Please can someone give me some advice. I have a Veritas R8 Alarm. The alarm was originally fitted by an alarm company. Over the 5 years since the alarm was fitted certain numbers on the remote keypad became faulty (I assume with general use) recently the Part Set on the keypad stopped...
  13. M

    does anybody know what make this panel is? (alarm keypad)

    hello the customer has instruction for a Karizma model i rang them (honeywell) and they said this isnt one of theirs, im trying to increase the entry time on a magnet set on a roller shutter door for a shop.
  14. P

    Veritas 8 alarm system locked up

    Hi I have a Veritas 8 alarm system with an additional Veritas R8 keypad. The system appears to be locked with the following symptoms. Main box shows tamper light – red, unset light – green and power light green. When the alarm is set, here, then the exit buzzer continues forever, and thus no...
  15. D

    New PV install with keypad prepayment meter problem

    Hello Having a problem with a new install. The system is running and producing really good results, provided by the monitoring equipment. However it has a keypad prepay meter and with with all but the tv turned off the credit on the meter are still running down when the system is showing to...
  16. D

    help with alarms system

    Hi all i know this isnt in the alarms thread but i cant get access to it :-/ Im looking to install an additional remote keypad for a mate in his garage ( so he can set it from the house ) . its a : accenta 8ep 396 optima compact g3 . Now where can i find a panel that will go with it ? or...
  17. keniff

    texacom alarms

    hi guys i recently fitted one of the texacom alarms to a customers property. i liked the system and the wiring was simple enough. im looking to install one in my house but i would like a keypad with rf keyphobs. i already have a texacom bell box i was given to me the other day, anyone know what...
  18. A

    Veritas 8 alarm

    Hi, first time post here. I am having a problem with the above alarm. When I do a full set before I leave my home the alarm works normally, upon returning to my home I have to go through my conservatory first of all which has a magnetic sensor on the door, this starts the time delay on my alarm...
  19. J

    Ademco Alarm - unknown codes replace with acceta G4

    Hi, I have just buying a house that has a Ademco alarm. The box is under the stairs (plastic square box with Ademco moulded in) below is a separate keypad, with keys on the right, and leds on the left (zone1, zone2 etc up to 8) I suspect that the alarm is not working (although the panel is...
  20. A

    honey well keypad

    hi there in the progress of replaceing a new keypad and alarm box the keypad i bought was an 8EP416-EU and the alarm box connect AG6 to Optima Compact GEN4, did the keypad the same as it was before then the box soon as i connect power the alarm went off put in the code alarm stop then that was...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top