leads

  1. J

    Kewtech Test Leads

    For sale Kewtech test leads including plug adapter and case. £25 delivered.
  2. Dartlec

    Best MFT test leads

    Looking to replace my current generic test leads that are starting to show signs of variable readings. I also find the crocodile clips don't tend to stay on neutral or earth bars very well. I have an MFT1711 (and a venerable 1552) so need standard 4mm connectors. The Megger set are expensive...
  3. A

    Polarity test failure on SPD extension leads

    Evening all, This has probably been answered somewhere here, but in case it hasn't... I have a Fluke 6500-2 and had trouble testing SPD extension leads as you cannot drop the voltage to 250V using the IEC lead test button. I found a way to set up an auto test sequence to include EB and 250V...
  4. P

    Concreting Swa & earth fly leads???

    So I have a job of installing an old cast iron lampost which will need to be buried into the ground about 600mm deep due to its weight. I am planning on drilling a hole at an angle from the patio area (next to the hole) into the hole to pass the 1.5mm swa into. Once the cable is in, I’m planning...
  5. M

    UK Advice on testing RBOS in prison

    starting to test in a prison. does anyone know why the rcd trip test does not work when done directly on to the rcbos
    • mat ogrady
    • Thread
    • advice leads leave rcbos starting test tests trip
    • Replies: 7
    • Forum: UK Electrical Forum
  6. L

    RCBO Neutral Leads bunched with Main Neutral in Main switch - C3 or C2?

    Hi all, Engineer carried out EICR and marked the above as a C2, I agree, the smaller cables could come loose easily as the terminal is mainly clamping the 16mm tail. Client said C3....
  7. Gavin John Hyde

    NAPIT leads website? another scam or decent?

    Saw this online and it seems NAPIT are setting up a job leads service and then charging its members for them. not sure how well this will work and if it does then i expect certsure to quickly muscle in on the action and use the NICEIC brand to get some of the market share and money being made...
  8. A

    Nulling Test leads

    Hi all i just sent my fluke tester off for calibration, and came back as a fault so needs sending off for fixing, now sods law i have my NICEIC assessment Thursday, so had to purchase the testers within my local wholesalers (as will take 10 days to get to get old ones back) so i got the Di-LOG...
  9. S

    sorry .... i have a multitester fluke 87 true rms multimeter ..... now order leads and a buzzer ... and very annoying

    sorry .... i have a multitester fluke 87 true rms multimeter ..... now order leads and a buzzer ... and very annoying
  10. T

    UK Extension Leads

    I am always extremely cautious with working with anything that involves with electricity. Was wondering if anyone can help and give advice to these with these questions to help calm the anxiety. First is how much load can i put through 1 extension lead? I know each of them can have different...
  11. Z

    Where to buy linking leads

    Does anyone know where I can get these? short lead with a croc clip on both ends
  12. G

    IEC Leads and PA testing.

    I dont usually do PA testing, or whetever the hell it's called these days, but have come across a few occasions where EU two pin IEC leads have been used with a travel adapter. In the majority of cases it's class II equipment being powerd but today I found this set up being used for a class I...
  13. H

    Two test leads, one port

    Hoping someone might be able to help. I’ve seen an ‘adaptor’ that allows 2 test leads to run from one port of an MFT (doing IR test). But, can’t find anywhere to buy it. Anyone know where I could get one from?
  14. ELECNEWT

    RCBO with Functional Earth Lead.

    I have read somewhere, (but I can't locate the source), that because the RCBO's electronic control operates at a very slightly higher potential than earth, there is a very small leakage to earth through the functional earth lead. Is this correct or is my memory playing tricks?
  15. B

    mains leads

    Mains Leads. I supply machines that are 21 amp per phase. the CE certification states a 2.5 5 core lead should be fitted. Which we do. I have been asked to fit 4.0mm because the mains breakers are 32 Amp. Isn't this the wrong way round? if the fuse was bigger it makes no sense to fit a bigger...
  16. C

    Fluke 1362b test leads

    as the title reads, my test leads need replacing but I’m struggling finding like for like replacements? Anyone know where I can get them please? I’m after the red test lead with test button and the 3 in 1 clamp lead Cheers
  17. MFS Electrical

    Aye or Naw? Trimming RCBO Leads

    I was always taught never to trim RCBO leads. I noticed on another thread the other day/earlier on that someone said they did. What’s the general consensus on the subject? The reasons explained to me as to why we shouldn’t cut them were the RCBO was calibrated with that length of cable on so it...
  18. C

    Test leads needed please

    Anyone in the Grimsby area have any spare test leads to fit a fluke multifunction tester
  19. J

    Kewtech test leads for sale

    As per the title. Set of Kewtech test leads with main plug and Kewtech carry case. £23 free postage.
  20. multimick

    extension leads with surge adaptors

    don't do much pa testing but noticed a couple of times these show reverse polarity on my megger pat 120 ,but test the pins for continuity and its ok on neutral and earth but no continuity on line,they all work ok ,is the electronics causing problems ?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Back
Top