Hi guys,
I am looking at having a outside light installed over a door, the light I am looking at uses a E27 bulb fitment which I am planning to use a LED replacement.
I would like to be able to switch the light between two brightness levels using a PIR so the light is on a lower brightness...
Hi, posting for a friend,
Whilst fitting a LED Light bar ( believed to be 120w) to a Landrover Defender (1995) he tapped into the signal wire of a relay that supplies his roof spot lights and used that as his signal for the light bar relay..
He has used the horns earth for the relay and also...
i know this is a regular occurrence,the fitting of recess lights in limited space & with celotex being fitted.why is it always the sparkles problem,when you've got designers specificing the fittings.
We've got about 100 mm from bottom of joist to ceiling,to be fair the builders have cut out the...
Hello all
I'm a commercial/industrial sparky and got roped into changing a couple of flood lights for led for a family member. They supplied some nice cheap fittings from Homebase. I've installed a gang ip rated switch, 1 switch per led flood light.
When switched off, one led flood light glows...
Someone is asked me to have a look at a transformer in an LED fitting they have checked that it is not the fitting itself but they think it's definitely the Transformer inside it, does anyone have any thoughts or ideas about the best thing to do or how to fix the transformer or would it be best...
Hi all
Looking for recommendations on some outdoor LED lights to fit above my back door and also above the patio door. Not sure if they should have sensors fitted, wouldn't want them switching on and off all night, lots of cats in the area!
Any opinions on good brands? Looking for something...
Fitted my parents a little 10w LED PIR light over the front door to help them see the steps.
took a fuse spur from a ring socket with a 3A fuse. 2.5 T+E from socket to switch, 1.5 T+E from switch to JB.
it worked fine for about 5 mins then turned off. I thought it was the settings so played...
Hi guys.
Came accross this issue and wondered if anybody else has experienced anything similar. Installed a new lighting circuit in some outbuildings and the customer supplied a little 10w LED flood light for one of them. Completed the installation and when the testing was complete energised...
ok so what i am trying to do is.
12v led turns on when the door is open and turns off when the door is closed.
But my sensor does it backwards " when the door is open the light turns off and when the door is closed the light turns on... on my tester it shows closed circuit when the magnets...
Good day.
Recently I have installed 26 1200 x 600 LED light panels, the customer now complains they flicker. As per usual with this sort of thing when I visit there is no flicker. It can happen 6 times a day or just the once.
I have researched the possible causes, poor quality drivers are most...
I have for sale the following light fittings:
3 x 6ft Hispec IP 65 Rated, Emergency, Single Fluorescent Light Fitting
2 x Hispec Emergency LED Bulkheads (Maintained or Non Maintained)
1 x 4ft Fluorescent Light Fitting (Non Emergency)
1 x 28W High Frequency Round Polo 2D Luminaire IP44 (Non...
Hi guys, wiring new house from scratch. Going to led lights in various rooms. More than likely been asked before though, what are best type of LED's to install. any one here experience using drivers? If so where would driver be sited safely/
hello everyone,
i am in process of making some led light units for my aquarium, i have made a diagram to show how i have set out the circuit, i have a 12V driver thats powers the lights but i dont think its the right one and i dont want to leave it on for long periods of time if it is the...
Hi
I have replaced a halogen light with a new LED light on an agricultural implement .I now have one LED light and one other halogen light on a simple radial circiut.Both work fine for about 30 minutes,then the halogen cuts out completely
and the led flickers non stop.I switch off the...
LED modular light fittings for sale. All various types and sizes, pm me for what your looking for and i'll give you an unbeatable price for forum members only
I have an LED T8 tube, 1.2m, on 240VAC it draws about 80mA and should have 18W. I do have compared it with a 1.2m fluorescent T8 tube, 36W plus ballast which has on 240 VAC 400mA. The current I have measured with an AC multimeter. Means the LED light saves 5 times the power. If I compare the 18W...
Hi Guys
Im no electrician but hope you can help.
Ive recently fitted led light strips to my car. I had them on my prev car with no probs. Just disconnected the side lights and joined the 2 wires up!
Done the same on my Saab and when they engine is running with the lights turned off, they flash...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc