Hi there. It's my first time both on this forum. I am a first-time homeowner doing some DIY projects but have run into a problem.
I replaced the light switches on the first floor with push-button switches from Prange Electric (Prange & Company Electric - http://www.prangeelectric.com). All of...
I'm in the US and not an electrician, but I know how to use a multimeter.
I'm replacing a Lutron MACL-153M electronic dimmable light switch. Single pole; it controls the ceiling light above the kitchen sink.
For some reason, It's on the same circuit as the master bedroom instead of the plethora...
i`m trying to add an outlet to an existing dimmer light switch. the switch is wired directly to the light so i only have a 3 wire at the switch box (black, white , ground}. so i guess the power comes down from the box at the light fixture. how can i add an outlet next to the switch?thanks for...
I am trying to replace a regular light switch with a switch/outlet combo but am a bit lost. There are 3 separate wires coming into the box and I'm not sure which is the light fixture or how to wire this. All 3 whites are tied together (do I pigtail off those 3 for the connection to new switch?)...
I have three switches. They each control two to three lights.
switch A: A1, A2, A3 (3 lights)
switch B: B1, B2, B3 (3 lights)
switch C: C1, C2 (2 lights)
The other day, I was working on A2 and got a shock while A was off. I was puzzled. I then disconnected all six wires (2 each of live...
Hi, I've moved in to a property that has 2 cellar lights, one at the top of the stairs and one at the bottom. The one at the top of the stairs works, I switched the bulb at the bottom of the stairs and it still doesn't work. When I've taken the switch off the wall there are a couple of wires...
Hi all,
I was hoping to get advice on how to blank off this light switch.
There are 2 light switches in the room which control the same light. I want to blank off 1 which is above my child's cot and she turns on during the night. I want the other switch to continue to operate the light as...
Hi all,
DIY homeowner. Any advice gratefully received.
I've recently moved in to a property. Electrics are of variable age including some old lead sheathed cabling, some back boxes of cast iron conduit type. Had an EICR done (I was at work frustratingly so couldn't ask questions as they went...
Adding an image of my set up
Basically this is the run across like 60-75 ft. The main line comes into a switch to control the entire line. That continues through 8 lights and then into an outlet. Originally After that outlet I had a light but I wanted to be able to control it independently...
Hi, we've bought a house which has the light switches in the reception rooms behind the door - we don't want to rehang the doors to open the other way as the rooms are small and it obstructs furniture.
I've had a few quotes of £100-£200 to move the lights switch to a different wall but one...
Hello
I'm trying to change a light switch but the screw caps are stuck.
I've tried all the tips I can find including blue-tac, sticky tape, levering with a stanley knife and a small screwdriver.
Any other tips anyone has please?
Thanks
Karl
I have a light switch that was crackling sometimes when I would turn the light on. Swapped out the switch today, and checked the voltage on it while it was switched off. It started out at 109 volts, and slowly went down until it hit 80 volts, and stayed there. I only have one other thing on this...
Hi folks, looking for help with a two way light switch…the downstairs switch (circled) puts light on and off, however, if the light is on, the single switch upstairs (photo 3)cannot switch the light off, it just remains on unless turned off downstairs. I think it is a tiny wiring fault but...
The light already installed can be controlled from the top and the bottom of the stairs and I was advised to buy a 1 gang 2 way switch. The old light switch has 4 terminals but the new one only has 3. My question is where the earth goes as there is no terminal for it on the switch or inside...
I am having some trouble with replacing a lighting fixture. I have done many throughout the house without issue, but this one is perplexing me. It is a light with two switches. When I took the light down, I was in a hurry but I swear both the black and white wires on the fixture were wired to...
Hi.
First up, I am not a qualified electrician so this is a DIY project However, I am physicist by training with a specialism in electromagnetism, so I know the principals of circuits.
I want to add a second switch to my garage lighting, so that we don't have to fight our way to one corner of...
Hey all
I have some basic electrical wiring experience, and I'm trying to install a wemo smart light switch in my bedroom
Load and line wires were easy to find and connect, but I'm having trouble narrowing down where the neutral wire is (or if I even have one)
Here's a picture of what I have...
I'm in the UK and I'm trying to fit a Smart 2-gang switch to control outdoor lights. I looked at the back of the existing switch and saw a black wire I assumed to be a neutral wire. So I bought a 'neutral switch'. I'm not sure now. You can see a photo of the existing switch connections and the...
I am a bit confused with different systems for light switches across Europe. I see that most of the companies that sell light switches offer both of the two options:
A: European/German/multi-part/2-module switches (found all of those names for it) (example image)
B: Italian/modular/3-module...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc