live | Page 4

live

Recent contents View information Top users
  1. cliffed

    Short circuit protection on high resistance on live conductors

    Thoughts on this scenario,obviously a short circuit fault situation
  2. P

    Water becoming "live"

    I recently did a load of work making good a poor installation for a friend who just bought a flat. I have some electrical qualifications and 30 years experience, but I'm not a member of a CPS because I don't do enough notifiable work for it to be worth paying the subs. When it came to bonding...
  3. OnlQQker

    Puts A Whole New Meaning To Working Live...

    Has anyone ever done any lineman work? Sudden weather change must be a nightmare!
  4. A

    Anyone have any ideas on how to remove a live broken screw from a meter

    Anyone got any ideas on how to get a live broken screw out of a meter?
  5. I

    NAPIT Certification Scheme How long after assessment to go live?

    I decided to join Napit and my first assessment was end of October. Everything was in order but not heard anything since and status on my login still says "pending assessment." Tried emailing my assessor but not had a response. Anyone with experience of Napit know if this is a normal time span...
  6. J

    removing a light switch, making it always live (UK)

    I've replaced a light with a low energy LED bulb which is controlled wirelessly, and now want to remove the old switch so that it is always on, and I can then control it with the wireless switch. Can I just remove the switch and connect the L1 and common wires together? It's an old 1-way 1-gang...
  7. D

    Can I switch 3 lighting circuits using 1 switch with only 1 live feed

    Hi All I have around 30 garden lights which turn on and off with one switch in the house. The problem is, if water gets in one light it a) stops all lights working and b) requires troubleshooting 30 lights to find the problem. Therefore, I was planning to have a second distribution board...
  8. Scolmore

    The Ring is dead, long live the Radial!⚡

    The Ring is dead, long live the Radial!⚡ When wiring socket outlets do you: 1. Use ring final circuits 2. Use radial circuits
  9. D

    Sockets have live feed but don't work

    I know the title is super vague but I have details here is the problem/context.. I recently had my kitchen done (including the lighting) which has caused two of my sockets upstairs to stop working. The house's had a previous extension so some of a ring circuit up stairs is also down
  10. N

    I need some advice on wiring in my new 90cm hob with 2 live wires

    I bought a new hob as we are fitting a new kitchen, we got all the other new appliances wired in, but the hob is a bit more complicated, it has 2 live wires then 1 negative and 1 earth, the wire coming out of the socket where it needs wired into where my old cooker was installed only has 1 live...
  11. cliffed

    Sockets additions Live

    Just your thoughts on this one,had the plasterers moaning about live sockets. Added a couple of sockets to an existing ring main,to keep the power on in the house I’ve connected & taped the cables & neatly coiled into the flush box. The customer knows the reasoning behind this,& will talk to...
  12. L

    UK HELP - Downlights staying on after replacing one with Switched live

    As title - had one downlight that transformer had gone so took out light,fixing,transformer and replaced. Had 3 wires coming in. 1x Red,Blue,Yellow and Green 1x Red, Black, Yellow and Green 1x Red, Black with Red coating added on end, Yellow and Green Wired up with Switched live (black wire...
  13. C

    Screwing a light switch back on and I assume I hit a live wire?

    I was screwing a lightswitch back into the wall when suddenly a bang and the lights tripped, I assume I hit a live wire? Can anyone shed some light on what happened?
  14. I

    Borrowed neutral / RCD trips but circuits still live ?!

    I’m just a homeowner, so please forgive me if my question sounds stupid .... i think the lights in the hall of my small bungalow are using a borrowed neutral. I recently went to fit a new light on the ceiling in the hall using the existing connections and turned off the MCB that said “Hall...
  15. J

    RCD didn't trip when live conductors cut

    I recently cut through the live 240V power cable of a plane the tool is double insulated, the blade exposed and combined both conductors. The supply is protected by a 30ma RCD and 30Amp MCB (10 yera old installation), the RCD didn't trip, it does trip when the test button is pressed. Could it be...
  16. W

    From Live Productions to Electrical installation

    Hi apologies if this is a common question, I am looking to re-train as an electrician, I currently work in the live event production industry as a Freelance Lighting Designer and Technician. Now I have a family I want a career that has better working hours and hopefully be home most nights! My...
  17. A

    Why is a cable live when the CB is tripped?

    Hi, Forgive me if it's a dumb question, I'm a qualified aircraft electrician but not trained in domestic lighting and want to be sure this is ok. I am replacing a light fitting on the top floor of a town house (12 years old). I have tripped the two CBs at the fuse box marked downstairs light...
  18. OnlQQker

    Live To The Lights Or Switch (Lighting Circuit)

    So an electrician on a job I was working on took the live lighting cable to the switches and then off to the lights. This was the first time I'd seen this and he said it made it much easier to add more lights to the cable plus tap into it if somebody wanted to put in a 2 gang for an outside...
  19. M

    Ring final no continuity on live ends r1

    Hi, Im new to fault finding, Im on a job where there is no live to live continuity on the ring final circuit which supplys the sockets to the whole house, with new flooring recently installed I cant access the floors, im assuming there are many jbs because its a 1960s property, if I connect one...
  20. S

    Switched live from 2 sources

    Hi, newbie here, I'm currently doing my level 3. Is the following set up ok -? Outside lamp set up to come on with a PIR, but also want to over ride with a switch. Just not sure if it's ok to have the switched live from the switch 'livening up' the switched live side of the electronic switch...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top