Hi,
Am just wondering if someone can help me on this "The disc of an energy meter makes 600 revolutions per unit of energy. When a 1000W load is connected, the disc rotates at 10.2 revs per minute. If th load is on for 12 hours, hw many units are recorded as error?" I calculated the % error of...
I have just purchased a second hand Robin SmartPat 3000 and am after a user manual for it. If you have one or could do me a copy of one I would apprediate it.
Nobby
Thread
aus
electricians' talk
manual
pat
pat tester
pat testing
robin
tester
Hi,
I am in the process of getting MCS accredited. I was told I need to get a manual handling & working at safe height certificate. I have done my city & guilds 2372 which covered both but is it enough for MCS or do I need to sit both courses? Any help would be much appreciated.
Cheers, Mark
mark da spark
Thread
electrical work
electricians' talk
height
manual
safe
working
Hi Guys
Just thought I would share the alarm manuals following a post in another section of the forum.
I have added these to my server for my own website, just for our protection the area of the site that holds these manuals so Joe Public doesn't get access is password protected.
Now before I...
BluSparx
Thread
alarm
courses
degrees
electricians' talk
engineer
engineering
manualmanuals
pdf
salary
students
Here's my idea, how about a sticky post in the alarm forum of all the alarm engineer manuals we get our hands on? It's a private forum, so I can't see too much of a problem. How about it?
I keep getting PM's asking for these, we actually use these testers but for some obscure reason I do have a pdf for the manual so foe all those interested
bugsy
Thread
aus
electricians' talk
manualmanuals
metrel
tester
these
Hi all
Was called the other day (as a plumber) as the customer was having a problem with his sewage pump
All waste water from his house is collected in a chamber buried in his drive then pumped into the main drains However, the pump had stopped working, I pumped out the chamber & lifted the...
Sanke
Thread
aus
control
domestic
electricians' talk
manual
pump
switch
I have recently purchased a Megger 1553, but am struggling with the user manual....
The section of the meter that has two settings and is coloured orange is used to test continuity, that much I understand. What I am having difficulty with is the fact it has two settings.... I'm not sure which...
JamesBrownLive
Thread
continuity
electricians' talk
help
manual
megger
needed
section
setting
I've been asked to install and American TIG welder in a workshop at a site where i do some more normal commercial works.
The Welder requires a 400v Supply (no problem as TP supply nearby) but the current DB is a Hager unit for whichi can only find max MCB's of 63A. this welder requires...
Hi All,
This is an issue with air handing units that have E stops fitted to stop the supply fan and main fan unit. At the moment on most AHU,s there is no manual reset on these units. So once the E stop has been activated the unit will re start when the stop is reset.
It seems that there...
Just kidding, I'm after a copy of the manual FOR the Hilti wall chaser and wondered if anyone on here might have one they can scan? I already know how to use the machine BTW.
Has anyone got one they can email me? Tried the member Bugsy as I see he has emailed them out in the past, but had no reply.
Seems daft that you can't get them off their own website :rolleyes:
Thanks, James
Hi,
I bought a MFT 1553 sometime ago but have not used it up until today as I have been using my Poxy Metrel untill its calibration expired.
Can anyone tell me how to do a no trip PFC on single phase and 3 phase as the manual does not actually say (unless I am that thick that I am missing...
ICE
Thread
electricians' talk
green
manual
megger
megger mft
mft
phase
single
Hi all.
I'm 22, and currently working, although its a dead end job.
Don't get me wrong, its okay and the pay is okay for what I do and it pays the bills, but I've been doing it for about 4 years now and really would like to learn a skill in something.
People have told me to look into plumbing...
Raider
Thread
being
don't
drive
electricians' talk
manual
people
sparky
wanting
Right folks i've got a problem.
Fitted a 63A 30mA double pole rcd (protecting outhouse)which is being fed from 63A s-type rcd(in house).
Tested rcd in outhouse-doesn't trip.
Tried manual test button as well-doesn't trip.
Re-placed it and tried again.Same as before.
Am i right in thinking...
hi huys looking for a bit of help i work for a family buseness , which landed a decent size industrial new installation wich we carried out no problems. Although now the customer has came back asking for an Operation and maintenece manual, the problem time. Does any one have one that i could use...
Hi
Apart from Megger UK (Cannot register for some reason?) Would anybody know where I can obtain or have in Electronic file or be willing to photocopy? a User Guide/Manual for the Megger PPK220 PPK220-EN-BS MIT320 + LRCD220.
2x Separates Continuity/Insualtion & Loop/RCD Testers
Cheers
Andy
lads doing a quote for a client and on it it mentions supplying manuals is this just descriptions of sockets , switches and lights and lamps etc .etc???
lee mcgregor
Thread
electricians' talk
information
installation
manualmanuals
materials
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc