We have been asked to carry out some linking up eart bars on 5 blocks of flats, they want the CPC running in metal conduit, where I think that a CPC can be clipped direct, anyone know the answer and possible reg number.
Fellas is it permissible to run a single 2.5mm in a loft or do really need double insulated?, there has been an attempt to add an earth to the circuit before but they missed the switches out and some fittings are 32Ohm R1+R2, it's in a bungalow so should be easy
I would prefer to build mechanical systems as I can be more hands-on, maybe use power tools, etc. Despite this, I am more interested in what electrical products such as computers, radios do, MP3s; I do have an interest in planes, rockets, and vehicles as well, albeit not as much.
I would...
Before i start here i asked Dan for permission to run this `AD` and got the go ahead. A brief run down on what ive done is below followed by what im in need of. Wont do a full CV but will try to outline my experiences and quals.
Mechanical engineering apprenticeship at 16 for four years, which...
thanks for all your help on my last post the pennies are starting to drop and things are getting clearer but i still fall by the way side with calculations and onceagain i'm having trouble with this one
any help would be much appreciated thanks
A crane raises a 2.5 tonne load vertically in...
just been given this query to do for my level 2330 any help would be much appreciated thanks
An electric hoist on the side of a building 45m lifts a quantity of electrical equipment through a vertical distance in 3.5 minutes. The motor rating of the hoist is 189.19w. Calculate the MASS of the...
Hi,
I am a qualified Australian electrician, recently arrived in London, about to sit my 17th edition assessment, and continue the mad job hunt.
I would just like to know what sort of money I can expect to be earning when I do score a job?
Back in Australia, sparkies earn from 25 up to about...
Does anyone know the formula for calculating the force generated during a discharge condition of high voltage surge arrester ? (force applied on the ground connection lead)
Thanks!
Hi. We are looking to quote to install domestic heat detectors interconnected to the existing smoke alarms for a social housing provider. Do you think that FP200 could be used to save us installing RCD protection to the circuit as the cable needs to be concealed. Our NIC inspector tells me that...
hi,
i want to design non-automatic transfer switch by 2 contactors and push buttons.
my question is do i need mechanical between the 2 contactors? or it is enough to work with NO-NC for both contactors.
please help me
When running surface mount T&E in offices and shops I have been in the habit of running it in conduit or mini trunking for the added protection.
Working along side another spark who asked why I bothered, he just clips direct along walls etc.
I realised that I could not remember why I started...
Evening all,
i just would like some clarification on the best practice concerning mechanical protection of garden lighting flex. I have installed swa throughout the system buried 500mm terminating in ip56 box's to be buried underground. The system is connected to a garage ccu with RCD...
Hello chaps, i'm hoping that someone can help me out with a question i have about panel isolators.
Is it UK legislation that an electrical enclosure should have a mechanical interlock on a door mounted isolator (if fitted) to prevent the door being opened with the power still switch on? If...
ContractorForum: Hello from Spatial Mechanical: Hello all In the Air Conditioning and Ventilation trade...did our first post thi.. http://------/72ABel
More...
Follow us on Twitter.
where the other measures of 7671 522.6.5 are not used and a cable passes through a joist less than 50mm from the top, the cable must have adequate mechanical protection against nails, etc. Please tell me, does this requirement only apply to the parts of the cable passing through the joist? or...
Just read the IEE Wiring Matters mag today, article about what you are/aren't responsible for in an installation where you do Minor Works Cert stuff. It states that you need to check that the DNO head/meter/isolator setup is in good gondition and safe before starting any work on that...
Hello,
I am currently building a key Data Centre Infrastructure division on behalf of one of my key clients.
I am keen to speak to anyone from a Mechanical & Electrical engineering background. There are positions at all levels so if being part of a brand new division to utilise your...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc