Have any of you had your megger come up with UL exceed. I can’t work out what the issue is? Was trying to take a measurement on a sub main for ZDB with the 3 lead method but keep appearing with UL exceeded. The system has an earth and correct polarity any ideas anyone? Thanks
Hi Sir, I'm having a Megger MIT 1525 15KV insulation tester. During testing test voltage is not increasing more than 2KV. these is no physical damaged to the equipment. what could be the reason? pls advise.
thank you...
Hi to all,
Do any of you use a AVO830 multimeter?
I got one recently but found the readings to be very slow , when on auto ranging, compared to other multimeters we use in the dept. e.g: Brymen, UNI-T, Fluke.
This is very noticeable when measuring AC on auto ranging. On manual ranging ireads at...
MEGGER 1741
For sale, used but in good condition with clean screen etc. Comes with a full set of leads and a charger, Megger soft case - square one (not shown in pictures). Can also sell with the Fluke box it has lived in if wanted. Calibration expires in January 2022
£600 incl postage
£650...
MEGGER 1730
Used but in good condition. Complete with all test leads and a charger. Soft case.
£420 incl postage
£470 incl postage and calibration
If you have any questions or want anymore photos then please PM me.
I am thinking of buying a second hand tester, but it is displaying error 52, any thoughts on what this means, and weather it needs to be repaired. Megger 1720
Hi I have a second hand Megger MFT1720 and it shows error 23 and wanted to sell this, I have a hard case and all cables that come with it.
It was calibrated 2017 cert no STD45397 Serial no 101292160
What do you think it's worth with this error 23. apart from error this is in lovely condition...
Hi all
please see my Megger for sale
very little use (around 5-10 times)
great condition
all leads clean and in great condition
all accessories present
see images
thanks
Hi All,
Just purchased the mft1741+it seems good but my old mft 1721, when doing a ZE or ZS reading it would start automatically and stop once the test was complete. Ive got the new one to start automatically now, but when it brings up the result it keeps measuring and i have to press the test...
I have been offered a very well looked after unit . The price is £160 with all accessories etc . Calibration finished 3 weeks ago. Unit compares reading with another calibrated unit .so a possible good buy ?????
Today i had the megger dropped from a meter height and is now showing the FUS code.
Checked the fuses, Both are good. Contacts look very good. New batteries installed but still get the same code. I did the reset just in case but no results.
This Megger is not in the warranty, is quite old and...
Not mine , but thought I would pop a link here as someone might fancy it ...
https://www.ebay.co.uk/itm/Megger-Major-1000v-Tester/133580523709?hash=item1f1a0508bd%3Ag%3A4GEAAOSwau5ftUcI&LH_ItemCondition=4
As title, select the correct settings L-L L-E on left and As on right, am unable to change mode (2Lo 2Hi etc.
Screen comes up with <50v but does nothing else.
Any ideas? Runs continuity and IR fine, not tried RCD
Hi as per title, looking for a megger or fluke multifunction tester must be in excellent condition and fully functional.
Please let me know what you have.
Cheers.
Dear all. Does anyone know who can repair my MFT, continuity not stabilising and fluctuates. I know it's the banana connection for the leads as this is a known fault, mine has been replaced / repaired every calibration. No longer supported so parts not available. Cant bear to part with it.
My megger 1741 has come up with the code seen in the video clip.
I was doing a Ze. I disconnected the main earth from the earth bar in the CU when testing.
I believe that it means it would not let me carry out the test as the 'touch voltage' would be too great, but I don't know what the Ut bit...
I have recently acquired a Megger RCDT320 second hand from fleabay. It won't do auto testing on 300mA, 500mA or 1000mA also on these ranges it won't do x5 manually. The display reads > 1000mA. It does the ramp test ok on these settings. Is this faulty or how it is.
Thanks Mack.
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc