Hi as per title, looking for a megger or fluke multifunction tester must be in excellent condition and fully functional.
Please let me know what you have.
Cheers.
Dear all. Does anyone know who can repair my MFT, continuity not stabilising and fluctuates. I know it's the banana connection for the leads as this is a known fault, mine has been replaced / repaired every calibration. No longer supported so parts not available. Cant bear to part with it.
My megger 1741 has come up with the code seen in the video clip.
I was doing a Ze. I disconnected the main earth from the earth bar in the CU when testing.
I believe that it means it would not let me carry out the test as the 'touch voltage' would be too great, but I don't know what the Ut bit...
I have recently acquired a Megger RCDT320 second hand from fleabay. It won't do auto testing on 300mA, 500mA or 1000mA also on these ranges it won't do x5 manually. The display reads > 1000mA. It does the ramp test ok on these settings. Is this faulty or how it is.
Thanks Mack.
Hi
How do people get on with the 1741 software for transferring test results into a report? Any links to seeing it in action would be appreciated? I could not find any on Utube, i guess i am not looking for the right name?
Thanks
John
I have got it down to the choice of 2 MFTs. I am looking at either the Megger 1741+ or the Metrel MI 3152 EurotestXC.
The megger looks like a good workhorse favoured by many electricians, but the Metrel looks like a leap forward in technology.
In terms of future-proofing for EV chargers etc...
https://www.ebay.co.uk/itm/Megger-Electrical-Test-Meter-Old-Barn-Find-Retro-Vintage-Electrician-Wind-Up/153999803458?hash=item23db1a8442%3Ag%3ApSkAAOSwP%7ERfBVyi&LH_ItemCondition=4
none of that plastic rubbish :)
Does anyone have one going spare? I appear to have misplaced it/them. I can find the crocs, GS38 tips but no leads.
Unlikely I use 3 lead testing bit it does my OCD no good not having them in the box ?
Hi guys
Do you carry out an insulation resistance test on a 3 phase motor with thermistor protection as you would without thermistor protection or does extra caution or process need carrying out differently?
First time coming across one
Thanks
Hi Guys
Hoping to get some help with Megger 1553 MFT which has a fault ? It displays > 500 v and beeps when switched on even with no leads plugged into it ? Has anyone come across this problem before ?
Hi have had the megger 1741 MFT.
Error code 140 has appeared on the tester which is a fault on the circuit board for the 3 lead low zs test
This is the third time it’s happened, already sent it of twice to be repaired since buying it from new just over a year ago.
Was wondering if any one else...
Hi there all
I’ve got a Megger 150r pat tester and it’s stuck on an error code err 8000 2030
And no we’re is open to get it looked at
Can anybody help as can’t seem to find fault codes on net
Regards
Dave
In have just tried to perform a RCD test on a split load domestic board, the meter didn't trip the RCD on with of the RCD's, at either a point in the property or at the board, the Ze is good, the meter display showed the voltage in large on the bottom reading, then in the small display above...
As title, playing with test rig and running through dead tests; conductor continuity passes fine but if I try and do any range IR test it just won't have it.
I've tested the dead short to verify leads are ok and they are, I can't figure out why it's not running the test, it's a dead rig so no...
Thought I'd have a look at Megger's free certification software FormFiller yesterday. Downloaded it no problem and was quite impressed with it, seems user friendly and straightforward to use. Then I noticed the forms are still 17th edition! Anyone know if they have a newer version with 18th...
Hi everyone I have lost my blue megger plug in crocodile end off my test lead grrr
Anyone got one I could buy plz other makes which I have won't go near ?
At a light in my home, I have a voltage tester with two probs and a multifunction tester borrowed from work
The voltage Indicators shows continuity and beeps between live and neutral
But then multifunction set to continuity shows greater than 1000ohms
What am I doing wrong xD
Hello there,
i am constantly in search of used Megger CI (cable identification) and sfx 32 (cable fault location) devices, if your company happens to need to dispose old megger cable testing devices, please contact me, i will offer a reasonable price depending on its condition. My email is...
Hi, I have the opportunity to buy a new 1711 mft for £465, I only do domestic so happy with this model but wanted to know if I should bite his hand off or look around, cheers for advice
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc