not working

  1. littlespark

    Lights not working in fridge freezer

    My sister in law has a Zanussi intelli set fridge freezer... I can’t see the model number. No sticker inside, and I’m not moving it to look behind. She changed the lamps herself, but the lights still don’t come on when the door is opened. I’ve had a quick look, but I don’t see a switch around...
  2. R

    Maglock not working properly

    Hi, I have just wired a maglock/intercom/phone door security system, but for some reason, the door magnet only locks when the unlock button is pressed on the intercom phone. That is to say, it's working the opposite way to how it should be working. As far as I can see, I've checked and double...
  3. B

    Lights not working

    Hi I changed out a light fixture. The breaker box was unmarked so I had to flip a few before finding the correct one. After I was done lights in another part of the house aren’t working. All the breakers are in the on position. There is one gfci breaker that I reset. I’m lost on why some...
  4. S

    New Extractor Fans Not Working - Wiring?

    Hi we have just had two new extractor fans installed, one in the bathroom, one in the toilet, I am sure they are correctly wired, however the run on timers are not working, just goes on and off with the light, the toilet one is not working at all :( I have tried switching the wires for the...
  5. P

    UK Sockets not working in 1 room only

    Hi everyone, Firstly thank you to all on this forum who helped me to track down the problem with the plug sockets not working in 1 room of my flat - i came across this website and the comments helped me immensely! I have registered and joined this group so i can share my experience and...
  6. P

    Lights in led bathroom cabinet not working. Any idea what to do

    Led Lights in bathroom cabinet not working, any idea what to do
  7. C

    Megger not working

    Hello Hoping somebody can help. I have a Megger MFT1552, whenever I turn it on it beeps and flashes 138v (detecting voltage) Even with no leads attached. Has anybody came across this before?
  8. A

    Ring Main with sockets not working

    Hi, I recently went to look at a house with about 10 sockets not working. Checked the continuity on the ring main ends - all good. I turned off all other socket circuits in the board just to make sure no crossed circuits - still the same, about 5 sockets working and the rest (about 10) not...
  9. B

    LED Gu10s to replace Halogen lamps not working

    Hi, In the past I've replaced MR16 halogen spots with LEDs and had issues getting them to work. I understand this is driver related. This time, I'm having problems switching GU10s halogen with LED. I can't understand this as my understanding is there will not be a driver involved and this...
    • Bradders
    • Thread
    • halogen lamps led not working replace working
    • Replies: 24
    • Forum: Lighting Forum
  10. Spoon

    Emojies not working

    I can't put an emoji in the post. I click on them and nothing happens. Anyone else having problems with them?
  11. T

    GFI in boat dock not working

    Had an electrician install electrical in our boat dock, but none of the three square d gfi breakers are now working. I unplugged the overhead door motors. Still the breakers will not reset. Tested hot at all three breakers, and everything in the box looks clean and new, so I doubt lightning...
  12. A

    Double plug socket not working...

    Hi all, I woke up this morning to find a double plug socket in the kitchen is not working at all however every other plug in the house is fine, and nothing has tripped etc... I have turned of the mains to the whole house and check behind the plug for anything obvious and all seems fine, no...
  13. Y

    Roller door not working

    Hi guys, I have a 3 phase roller door not working. These are my readings? L1-L2 418v L2-L3 419v L1-L3 415v L1-N 134v L2-N 255v L3-N 247v After checking L1 and Neutral I thought it was a neutral problem but why is it ok for L2 and L3?!?! Thanks
  14. R

    Socket not working anymore.

    So last night I noticed that the Socket behind the TV was not working. Plugged in my Kewtech plug tester and nothing. So turned off the MCB for the downstairs sockets. Undone the Socket and its been spurred using new colours from the 13A FCU. Changed the 13A fuse in the FCU, checked the cables...
  15. G

    Extractor Fan not working

    Hi all, Very new to electrics so please bare with me... Just moved into a new property. Extractor fan (manrose x100h) in bathroom not working. Took of face plate to find circuit was not connected. Connected wires to correct connections (see picture). Now the fan is running but independent of...
  16. D

    Altered ring main, now a DIFFERENT circuit is not working?

    I’ve just altered a ring main by taking 1 leg out of the board and taking it to a spur (then taking a leg back), to add a socket in. After doing so I’ve turned the board back on and everything is working as it should, other than cooker circuit (A radial feeding the cooker/hob, extractor fan and...
    • dhclec
    • Thread
    • circuit different fault faults main not working problem ring ring main working
    • Replies: 38
    • Forum: UK Electrical Forum
  17. S

    Getting Qualified but not working in the industry

    Strange question but I am 25 and working in a completely unrelated industry and I was wondering how I could become qualified as a domestic installation electrician not to work as an electrician but rather to be able to do my own domestic work on my own property safely and to comply with...
  18. D

    condition report socket not working

    Help having another blonde moment where abouts on a condition report do I record that there is no power to a socket outlet
  19. M

    Installing LED strips but not working possible short circuit

    Hi all. Seems like a simple fix just need some advice. I was fixing LED strips in the kitchen today. The switch in the kitchen is a 2-gang which powers the LED strips and the ceiling lights. There are 3 seperate LED strips to go around the kitchen, each connected to an LED driver and power...
  20. L

    2 way switches not working

    Now guys, Need some help please, i have a 2 way switch that not working correctly, got a 2 gang 2 way switch on landing of 1st floor, on second floor there's a 1 gang 2 way switch, now the problem is that if the light is turned on from 1st floor it can not be turned off from 2nd floor and vice...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
Back
Top