Hi I recently bought a led 10w floodlight with PIR. My other half tried fitting it the other day and all the tiny round lights that make up the led weren't coming on ,therefore not making the light anywhere near enough bright. He plugged it into a socket to make sure it wasn't fault and it...
Ladies and Gents,
This is my first post here so I'll thread a bit of an introduction into my question, but first, a one-line summary of why I'm here:
The two light switches in our living room don't work as expected, do the regs allow me to resolve this myself or does it have to be done by a...
Hello guys,
I bought a 2015 E-XL accord with an accident on the driver side.
After I got the car ready from the body repair shop, I noticed that rear windows are not working at all. I haven't checked the windows before the repair because the driver door was completely removed.
I took it to...
Hi folks, I've come here for a little help, after switching off my downstairs lighting circuit to change a light switch and then turning it back on to find that the back half of the house is now in darkness.
Basically, I wanted to add a WiFi switch for control of the living room lights, so...
hi guys
I'm currently Doing a fault find on lights not working.
I got 230v between live and cpc, 230v between live and netural. Am I correct in saying we have a dropped put neutral at some point along the circuit!
Hello.
I have just bought my first property ( although an OAP) and have only just moved in. It has storage heaters, emersion water heater and a Triton shower, none of which appear to have any power to them. The main power switches are down , so is the separate shower power switch. The only thing...
I'm trying to work with IRF640 FET transistor (picture attached). FET transistor picture
The problem is when I put 11V on the G-S voltage. The D-S voltage is 4-6 volts or more.
Why the transistor doesn't open fully?
What am I missing?
In the simulator, the voltage falls to 120.18mV.(as...
So one day the radio stopped working i switched it to another the same problem, so i checked and changed the fuse, same problem.
Next i checked the voltages and continuity from the wires seem ok e.g. 12v.
I thought maybe im really unlucky so i used a cassette radio, and nice the cassete...
Hi Guys
I went to change an extractor fan in the bathroom today which runs off the light switch. I thought I'd isolate the power upstairs using the upstairs lighting MCB. I always double check there is no power there by switching on the lights and using my fluke to test for voltage and all...
Hi,
I am looking for a bit of help. Don't normally touch Phone lines but been carrying out a large renovation and customer wanted a Phone socket face plate changed. Had a look and it was only 4 wire connected so didn't think it would cause much harm. House has had everything disconnected in...
Hi all
Model: Mirage OJC44VSA
I have two cling fans however one is not working. The light comes on about a second after the working fan light and much dimmer. It is non-reactive to the remote in this state.
The fan light sometimes when turned on, buzzes briefly and displays a full light at...
Hi guys, I'd appreciate any help on this.
I have a large rainwater harvesting tank sunken in my back garden (wife dug the 2m square hole whilst I carried the soil through the house) - the tank works perfectly; the submerged pump on the other hand periodically goes faulty and I've had to...
Hi All
I have 3 halogen downlights on my landing and stupidly put a 30w bulb in one when the max was supposed to be 20w.
None of the downlights on the landing now work. Could it be the transformer thats blown?
If it is the transformer could someone please advise on the transformer i would...
hi all, we have a serious problem with our sockets. My partner turned on the kettle and it tripped the RCD, he unplugged it and turned the electricity back on but all sockets in the kitchen don't work anymore except for the cooker and dishwasher (electrician said they could be on a different...
Caz
Thread
cooker
dishwasher
earth
kitchen
notworking
sockets
working
Hello,
I am simply trying to replace an MR16 LED spotlight that has stopped working. However when I put the bulb in and turn on the light it simply flashes and turns off and won't turn on. Is anybody able to help me with why this might be happening?
The old bulb has the following: Sainsburys...
Anna86
Thread
changed
lights
minimum
mr16
notworking
replacement
transformers
working
Someone is asked me to have a look at a transformer in an LED fitting they have checked that it is not the fitting itself but they think it's definitely the Transformer inside it, does anyone have any thoughts or ideas about the best thing to do or how to fix the transformer or would it be best...
I haven't done any testing yet - too dark and too knackered - but:-
there has been no change to the circuitry since installation
there are four separate circuits each having both fluorescent and halogen and/or tungsten. The fluorescents are switched separately from the other fittings
this...
adpierce
Thread
confused
fittings
fluorescent
notworking
other
others
switch
working
hey guys and gals, pete999 is having problems logging on, well i can log him in but it then says he does not have permissions to view, new posts , for example
any ideas
TIA
I have three electric heaters in my flat which, according to the fuse box, are all connected to B circuit. All other sockets and appliances are on circuit A and work fine. The heaters only work sometimes. For a while I thought it was at certain times of day they worked, but there doesn't seem to...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc