Someone I know requires a heat detector to be fitted in their kitchen because they are renting the house out. It would fit onto the lighting circuit.
Is this notifiable?
Also, emergency lighting, connected to the existing lighting circuit, is it notifiable? This would be in hallways etc.
Hi, its been a really busy week, after a week on the red wine and cheese in France last week so my brain is aa bit mushy!
Yesterday I replaced a single socket with a double pole switch in a kitchen and installed a panel heater. Also I replaced the MCB with a RCBO.
Is this notifiable under Part P?
Hi,
I'm redoing my kitchen(DIY) and have the following questions about connecting equipment in a kitchen:
Would it be notifiable to change a cooker connection unit to a FCU with a 3amp fuse? I want to connect a standalone gas cooker (only has a fan requiring power) and don't want to have to...
I am about to place new socket's in a kitchen. I have to move them about six inches up to accommodate her new (to be fitted) kitchen.I am not adding anymore sockets, just moving the existing one's.
So my question is a 2 part job.
1st - Is this still classed as non notifiable work under Part P...
hi, i am looking to get extension on my house, and wondering what to do about elec works. i am an electrician and the work only involves another light and extra 2 sockets in extension. only asking does anyone ask for a certificate etc once work done? not had any building work done to own house...
hello
got some jobs comming up replacing 6mm tails to 25mmm with 16mm earth all bonding is in place and meets regs but there is a good chance i wont be able to change the dis board witch is the re wireable fuses if i was to notify this i was thinking i would put on the eic that it was a...
First off all, If this is in the wrong section, many apologies.
I am just after a bit of clarification really, if possible please.
I have just finished my Level 2 C&G 2330, with 1 term left to do plus all the exams (2391, AM2 and Part P) and whatever else will help.
Anyway, I have been...
I am an NICEIC approved contractor, just finished a refurb of two rooms in a nursing home and unsure if it's notifiable. I know I could ring the NIC but thought I'd just try here first. Thanks
Having a conversation with a work mate today, who is thinking of having a new kitchen fitted.
This would mean him having to move some sockets and extending the ring in the kitchen to add a copule more (currently has 2 doubles and a single), from what i can gather he still has a old wylex 4 way...
This is not a plumbing question!
Just added RCD fused spur for a customer who is having a new bathroom fitted. The spur is to supply the shower, which is located in the loft. The shower has "control" cables which run within the "shower unit" into the bathroom.
I say its notifiable under part...
6 eyeball style downlights in a shower room, not IP rated at all, change like for like, install 6 new IP rated bathroom downlight, I assume its notifiable as its in a shower room?
While I've got you here, you change a CU do you complete a EIC or a PIR?? I usually do a EIC but got told a PIR is...
Hi Guys n Gals been while.
Asked to do alter some communal stairs lighting in flats and fresh install of some security lighting outside. basically block of flats with car park/ garden etc.. First i thought this would be non notifiable, but been told i might be wrong now>? any ideas.?
Also...
Been asked to add a couple of sockets to ring as living room only has 2 outlets, also wants a dso added in the hall way.
Just want to check, as it is an addition to existing circuit is it non notifiable?
Would I just need to supply a minor works cert?
Hi
Newbie confused and needing some clarification on what I can or can't do and when.
I am trained and up to date to 17th edition, but not registered to a scheme.
How do I carry out a notifiable install in a domestic?
So I notify the local authority before works.
They inspect first fix
I...
Went to a job today, in a laundry room of an elderly persons development, with nothing else in the room, only washers and dryers.
The previous set up was a pay meter plugged into a socket, then a flex from the pay meter hardwired to the washing machine.
The old machines have been removed...
Morning guys.
I'm in the process of replacing an old re-wireable distribution board. I've checked the earth bonding and main earth and they are 6mm and 10mm.
Now am I right in that updating the earthing isn't notifiable work, but because the mains water is supply is in the kitchen, this...
hi all i am a recently qualified domestic electrician and was tought that any work out doors was notifiable. just phoned building control about installing some garden lighting and was told that i didnt need to let them know,does this rule vary from city to city or is the person on the other end...
A friend of a friend split up with her partner and he took the shower with him when he moved out leaving wires hanging out the wall. The local council were called and the circuit was disconnected from the consumer unit as a safety precaution. A plumber has put in a new shower and she has asked...
can anybody help me?
i have been contracting to companys for the past three years and i am thinking of advertising and starting up myself. when i have done work for the companys they tested and notified building control, what i need advice on is if i do notifiable work what would i have to do...
Looking to change my shower for a newer one already have a 10mm cable feed and 17th Edition board.
The all i will need to do it disconnect the old one and reconnect the new. So will this be notifiable.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc