off

  1. C

    Lights start off dim then flicker

    I wire my basement and I have a room where the lights come on but are dim, they eventually get to full strength. Any thoughts on why this one room would do that. It is set up with 8 canister lights in the ceiling on a regular switch. no dimmer.
  2. T

    Lights won’t turn off

    I have four can lights in my kitchen that are controlled by two switches on opposite sides of the room. Recently, when you try to turn those lights off by the switch opposite switch from that you used to turn them on they just blink and stay on. This seems to be true regardless of where you...
  3. A

    Car electrical lights shut off

    Hi, I have a 2009 corolla sedan conquest 1.8 4cyl manual. My lights have started turning off whilst driving especially high beam but not my fog lights. My reverse lights have also started to not work as well. My radio aux has also completely stopped working and my radio stations are being re...
  4. S

    Can a split-second power outage shut off my PC?

    Hello. My pc: 10850K stock 4800mhz stock Kraken X73 good temps 2x16 GB DDR4 GSKILL 3000mhz XMP Seasonic Tx-850 Ultra Titanium Gigabyte Rtx 3090 Gaming OC Aorus Z490 Pro Gaming 1 TB SSD I wanna ask about something. So i plugged my pc in march 2021. All is fine. No pc shutdowns,reboots,pc...
  5. M

    Do hazardous area light fitting need an internal cut off switch when the cover is opened?

    Do light fitting in hazardous area need an internal cut off switch when the cover is opened
  6. M

    Difference between ON and OFF intervention in the tsd of an ACB trip module

    Hi All, I'm trying to learn about discrimination and I came accross the LSIG characteristics of an Air Circuit Breaker. Howecerm there is something I really cannot understand about the Tsd. What's the difference between ON and OFF in the intervention? Thank you in advance
  7. N

    Newbies in UK and storage heaters, off peak, all stuff

    Hi, My husband and I recently moved to the UK and a new flat, after living always in accommodations. We have some big answers about the electrical system in the flat, and I hope you could help me. I'll leave you some photos to explain ourselves. Q.1: we have one switchboard that says “storage...
  8. M

    Light circuit off at consumer board - but RCD / RCCB still tripped

    Hi I'm removing an extractor fan from our WC, as it's just a toilet and sink and we never use hot water in there anyway... The extractor is on the light circuit, but has it's own pull cord. I double checked by turning the fan and light on, then switching off the MCB. All good. I triple checked...
  9. D

    Off grid DC supply in domestic.

    Just thinking! dangerous I know. but I want to get some pv panels up in my home, but thought about setting it up without the inverter or giving back into the grid. id use it for totally resistive loads like a storage heater or water immersion. Storage heater would be old style without the...
  10. stidge

    Led panels off multi occupancy sensors

    Hi all , I’m looking at installing 17 led 600x600 panels into suspended ceiling in changing rooms . There are 2 x entrances and showers so I’m thinking 3 x pir 360 ( occupancy sensors ) to control all lighting . Anyone have any experience with connecting all s/l together in sensors to turn on...
  11. D

    Do I sack it all off and keep it simple?

    Hi all, Spark for 15 years, had a company for 11. I have run the company in various different fashions over the years but it’s mainly been labour only contracts on medium sized commercial and industrial installs recently (50-100k). I’ve had a fairly bad run at it this year as I took too much...
  12. Mark42

    Metal saddles inside trunking when only 400mm off a concrete floor?

    I'm a bit out of touch re 18th edition. Is it really necessary to fit loads of additional metal saddles inside trunking when it's only 400mm above the concrete ground floor of a sports hall? All the stuff about premature collapse makes sense, but where, in this case, if the cable going to...
  13. B

    Cannot have a Spur off a spur but can use an extension lead?

    Probably a stupid question but why is it that you cannot (I think) run a spur off a spur but can connect an extension lead with loads of sockets on it? My son needs about six sockets in a new kitchen where there is only one double socket at present. How can it be done? As a matter of interest...
  14. J

    UK Spur off a 4mm twin and earth, 32amp radial

    I have a dedicated radial from the consumer unit to my conservatory. This was installed using 4mm twin and earth as it gives the option to use multiple electric heaters on a 32amp breaker if needed. The circuit consists 4 double sockets plus one single socket on the end, in a weatherproofed...
  15. A

    Relay to turn power off to solenoid

    Hey everyone, I am new here and by no means an electrician. I have a solenoid valve that needs to turn off when my ignition turns on. I also would like to turn on the solenoid with a switch when the valve is needed. Here is my attempt to wire a relay to achieve the needed task. Any...
  16. thomasd87

    Installing recessed lights off ceiling fan switch

    Electrical isn't my thing though I know just enough to get me into trouble thinking I can do it after coming up with grand ideas. When I bought my house, it was an older house with the typical cloth two wire wiring. There was one new 3 wire that had been ran to a jacuzzi tub in the bathroom...
  17. C

    Does reinstallation of busbar need professional sign off?

    I'm buying a house and have received the electrical testing certificate. There were two C1's and a C2 identified, all very easy fixes even for an amateur DIYer, the problem I have is that the electrics were condemned for this reason and so the busbar was removed from the consumer unit. This also...
  18. L

    Review my Plan for Sub-panels off of Sq. D Homeline Main Panel

    Was wondering if the gurus can critique and/or provide recommendations on my plan to install two sub-panels in a (50'x100') 5,000 sq ft steel building that I plan to use as a hobby woodworking and welding shop. I plan to install two sub-panels using two feeder circuits originating from the...
  19. C

    Hi guys, has anyone got a fix for clipsal saturn series mech on a 2 way light staying dim when off?

    I have run new cables, segregated the SDI cable running back, so the LED will switch independently and have also installed a capacitor, since I was informed that would be a fix but it bursts light. The picture shows bottom mech with the switch on and bottom mech with the switch off. Thanks so...
  20. multimarcus

    Can I use this switch button to turn an AC/DC PSU on and off?

    I would like to control a Power supply AC/DC connected to mains with an input of 230v (2.4A/115VAC; 1.2A/230VAC) and output 5v / 40A (200Watts). Can I use a switch button rated 3 A @ 250 V AC to turn it on and off? It would be one of these or something similar.
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert

Back
Top