Hi guys
Can someone pls tell me if the max output current (iacmax) on an inverter data sheet is the max output current per inverter or per phase!
Thanks
Mark
i've seen an electric fire advertised very cheaply in a local newspaper (dimplex SP920) and I need one for my living room as the gas fire has not been serviced and 5 years and I'd rather switch to electric as they don't need serviced, one thing that caught my eye is on the tech spec i found...
first of all hello to everyone.
i need some advice on reduced inverter output on really sunny days.
ive had my system for about 7 weeks, its a 3.0kw 12 a-sun 250w panels the inverter is a power one aurora 3.0 and the system is on 2 strings. my probelm is on mixed cloudy and sunny days the...
"Hello All",
When I was reading various Posts about Freeview TV / Digital Switchover to try and find a reason why My Freeview Signals had become worse since the Digital Switchover I remember reading a comment from a very knowledgeable Member - mharries1 - to the effect that Connecting the Sky...
I have a question.
Basically I have been asked to install electrical heaters in a large area and the customer wants them timed and on thermostatic controls. Which is fine you can just buy the plug in's right?
Bloody hell their expensive!
I haven't played with contactors and din rail timers...
tennis ball
Thread
circuit
contactor
contactors
design
help
help!
output
timer
timers
Hi
I had a solar panel system fitted 22 Feb 2012. The system includes a 15 panel sharp 245 array split into 2 strings of 9 and 6 running into a Sunny Boy 4000TL.
They system seems to produce consistently until about midday then cut out for periods if there is a decent amount of sunlight. I...
Hi - I have a 2.99kW solar array, and the top output I have had had previously been yesterday's 2800w at one point at lunchtime which I was more than pleased with as I was under the impression the maximum could be 2999w? Today on 3 occasions output was over 3000w (peak was 3080w). Have I got the...
I noticed yesterday that my SMA 4000TL spent 30 or so minutes producing 0 Watts. There are two arrays on the system and when I checked the inverter display it was showing one of them at 305V between the panels and the inverter and 245V between inverter and the grid. The red light was also on on...
Hi,
Can any one advise me about the actual damage caused to a frequency drive if flashed with 500 vdc from an insulation tester?
I have an ABB ACS800 0100 drive (100kw) that has been flashed by someone. The drive uses IGBT modules fired from a control card, will it be the IGBT modules that...
Hi guys,
Some of PV installators told me that they want 4KW inverters with the max out put of less than 16A/phase. But G83 defines that is the reuqirement to systems less than 3.7kw. For 4kw, the safty should be G59. Could anyone tell me why some installators hope to get 4KW under 16A...
i everyone, firstly, thanks for taking the time to read and hopefully help me out.
im not an electrician but have some fair know how for small electrical projects, but i could use some majour help on this project i have going.
basically im looking to take 1x 12v NiMh rechargable battery and...
My PV system (4kWp of panels with a Power One Aurora PVI-3.6-OUTD-UK inverter) seems to regularly peak at 3608-3610 W. In reading the literature on the inverter I was expecting to see a peak output of 16A which is 3680 watts at 230 volts or 3840 watts at 240 volts. Grid voltage as seen by the...
Am working at a local school installing CCTV system. The headmaster collars me today and asks me whether I can automate the bell ringing system and puts in my hand a leaflet on the Danfoss 841.
I had a quick look at the current system, which is a single push button in the school hall that rings...
Has anybody got a link to a website I came across sometime ago where people have the output of their systems available so you can see how systems are performing locally?
GaryM
Thread
available
bsi
local
online
output
showing
solar
systems
website
Hi all I have been attemping to monitor the output of my system using an energy monitor that was provided by one of the energy companys for the purpose of measuring used energy.
I also use the Sunny Beam but this has to be prompted to interrogate the inverter and therefore will not provide an...
Just wondering where you would stand if, in say for example 10 years time you decided too, or had too, change your panels for different models with regards to the FIT?
For example, if your panels failed, and the same were no longer available for direct replacement?
Or if you wanted to upgrade...
Hi guys,
Anybody used a 7 watt led bulb? Any comments on the light quality? I've tried a 6 watt Aurora bulb which was sold to me as a 50 watt equivalent. It isn't awful, but it is definitely not equivalent to 50 watts. Also, if anyone is involved in r+d
on led bulbs are you expecting to...
Hi All,
Just had a 3.84 kWp system installed. 16 Suntech 240w panels and a Eltec Vakere 3.8 HET invertor. System has been running for one week and it has been dull during this period. Any ideas on what kind on power should it have developed in this time? Actual is only 10.2 kW!!!
This seems low...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc