oven | Page 10

oven

Recent contents View information Top users
  1. M

    Cable Sizing for Oven...?? Please Help..!!

    Morning.... I was wondering if you guys could help me with this..?! I’m currently having my kitchen updated, including all new appliances... The oven, according to the manufacturers documentation has a rating of 4.2kw, which is 2.2kw or the oven and 2.2kw for the grill... The paperwork states...
  2. N

    Same Circuit for Hob and Double Oven

    Hi, We’re having a new kitchen fitted, with a separate hob and double oven. The Hob is 6.4kW and the oven is 4.2kW totalling 10.6kW. Would the below set up be ok for this? Consumer Unit with 50A MCB, 10mm T+E to 45A Cooker Switch (approx 13 metres), 10mm T+E to Dual Appliance Outlet (Scolmore...
  3. R

    Oven thermostats

    Is there a BS for oven thermostats covering variable temperature. I have been told by the oven manufacturer that this is so and the temp can vary by up to plus or minus 30 degrees but cannot find any proof on line - having great difficulty cooking!!!!!
  4. L

    UK Oven and Gas Hob Dilemma

    Hi All Best wishes for the New Year. After a full refurb, builder forgets the gas hob ignition cable outlet! Current set up: I have 2-Gang 45A Cooker & 13A Switched Plug Socket (combined) above the worktop. This ombinedc unit is supplied by a dedicated 6mm2 wire directly from the fuse board...
  5. B

    Oven and hob connection

    Hi all, new 2.5kw oven and 7kw hob, existing 6mm 32a supply to 45a cooker unit, now no access to socket circuit or new supply for oven, so 6mm into cooker switch then from load side to new FCU 13a with 6mm, then 2.5mm to oven? Will I get x2 6mm into outgoing side of cooker switch? Unless I keep...
  6. J

    Getting a new oven and wondering what work I’ll need an electrician to do

    I’m going to get a new oven but suspect the current one is wired differently to how the new one will need to be done. Old one is connected as per the pics. I.e it’s on it’s own circuit with a red oven switch, but the actual connection is via a socket behind some drawers. The new oven will be...
  7. J

    2KW oven and 6KW hob on B32 MCB

    Can a 2kw (on a 1.5mm manufacturers flex) fitted oven and a 6kw hob (on a 2.5mm manufacturer's flex) be connected into a cooker outlet plate behind the cooker? The circuit is wired in 6mm t&e on B32 mcb. It has a 45A cooker switch with 13A socket in the kitchen (within a metre of the appliances)
  8. R

    Neff oven thermostat - 4 spade/ 2 spade

    hi all. the thermostat in my neff fan oven (u17m42n0) seems to have gone. the part in the oven is neff 55.17069.080 but seems to have been phased out for 55.17069.210. problem is; the new model is only 2 spade connectors whilst the old one is 4 spades on 2 double connectors - with grey +...
  9. B

    Contactor for oven

    Hi, working on a job, guy wants all appliances on grid switch, the oven needs 32amp supply so best way I can think of is 6mm into contactor 6mm to cooker then 1.0mm from contactor to 20amp DP in grid switch to keep it on grid??? Thing confusing me is the grid is on a 4mm 32amp at the moment and...
  10. R

    Double Oven Installation KitchenAid Model KODE500ESS02

    Hi- I posted this on another forum so ignore the first part unless you know the answer and want to throw it in there... My current oven/microwave combo unit is sitting on two 1x6's above a drawer. Do I need to install a full floor for this double oven and use the feet or can this just sit on...
  11. B

    UK Oven trip MCB

    Hi all, I’m hoping someone will be able to give me some advice on my oven. Tonight I had both ovens on (as has been done on several occasions). When I went into the kitchen about 10 minutes later I noticed the oven was off and had tripped the 32Amp MCB. I reset it at the CU and it came back on...
  12. jj2005

    Neff Oven Overheating after replacing fan element which initially tripped

    I have a 12 year old Neff Oven b1442n0gb who's fan element stopped working. I bought a generic element from amazon (NEFF Fan Oven COOKER ELEMENT 2400w eq2 499003 spares: Amazon.co.uk: Large Appliances -...
  13. M

    Oven thermostat & temperature

    Hi, looking for some advice. The wife recently said the oven doesn't cook food the same way it used to (recently a chicken pie came out cold in the middle). So I bought a oven thermometer, put the oven on 200c and after about 7 minutes the light went out. I checked the oven thermometer but it...
  14. D

    Nice Oven & hob Hook up...

    1571513000 At least they left the melded plug top on the hob... Why they didn’t just swap the switch for a double socket beggers belief
  15. M

    Patting a microwave oven

    I bought a leakage detector which says "must not exceed 5 mw/sq cm " Please: how far away should you be holding the meter? One oven failed. The PAT meter says "Riso > 20 Mohm Ileak = 0.84 ma " How is this possible? It seems to violate Ohm's Law. (This is just a Q out of interest, I will in...
  16. B

    Advice needed With Oven tripping Fuse

    Hi, its a bit of a long one, but i really can't figure out whats up? I had a ex-display built in double oven for a while and though the fan oven part worked perfectly, as soon as you tried to use the upper oven/grill the fuse would trip out every time. I finally decided to replace the double...
  17. A

    Hob and oven isolators

    What's your guys recommendation on hob and oven isolators. It's still undecided what rating hob and what rating oven is being used therefore I have decided to run a 6mm radial for the hob and a 4 mm radial for the oven circuit to be hidden in a base unit. Do you guys recommend a 45amp isolator...
  18. L

    Installing Ducting for kitchen hood + Fused spur for oven and hob ?

    Hi all, I have recently had a new hood installed and need to install some ducting. I live in a flat with loft access its a 1 up 1 down. I'd like to run the ducting straight up into the loft and then out through the soffit. Can someone please recommend makes of vents, ducting to use? And also...
  19. D

    UK Electrical oven installation

    Just purchased a new oven which has a 13amp fused plug attached. The kitchen has a cooker terminal which has 6mm cable coming from it. The existing oven has a 2.5mm flex (no plug). The hob is separate and also has a 2.5mm flex. Both oven and hob have been chocolate boxed to the 6mm cable - I did...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top