oven | Page 8

oven

Recent contents View information Top users
  1. G

    Changing from wired oven to plug oven

    Hi All, I would be extremely grateful for advice/comments on the following : My old built-under hard-wired oven died and due to space constraints I have only found 1 option to replace it : https://www.myappliances.co.uk/Innocenti-ART28772-Omega-Lux-60cm-73-Litre-Fan-Electric-Oven [According to...
  2. B

    UK DIY electric oven selector switch question

    Hi, I hope this the correct place for this post. I've just replaced the selector switch for a kenwood oven as the last one had burnt one of the connectors. The replacement looks fine but I have one concern. The connector that was melted had a plastic case around it but that is gone now...
  3. T

    New Zealand Help with oven wiring please?

    Hi all... I took out an oven recently and thought I would hardwire the replacement back in myself but the wiring systems are different. Is it possible to transfer the wiring shown on the old oven to the new connections as pictured and if yes where do I connect the wires?can’t really afford an...
  4. G

    Oven and hob wiring

    Hi all, I have a dedicated cooker circuit on a 6mm cable, 32amp mcb running to cooker switch down to connection plate. I want to install a 1kw ( just under) oven and 6kw hob! Am I ok swapping the connection plate for a dual one and connecting together?? And if so do I run 6mm flex hob to...
  5. N

    Candy fdp232 oven

    Hi My candy fdp232 main oven has suddenly stopped working - the upper oven, main oven light, cooler fan and clock all work, as does the light which indicates the oven hasn't yet reached the required temperature. But the fan and heating elements are not working in the main oven. Any ideas on...
  6. telectrix

    ariston oven programmer

    was working fine but now can't set clock. soon as press the appropriate buttons, the clock races backwards. tried power of then on. it stould display auto and 00.00. it does not display auto. only the 00.00 and the manual symbol. also every so often, it starts bleeping.
  7. S

    OVEN AND COMBI MICROWAVE WIRING

    Hi All, Currently rewiring my house. I am installing a new oven - 3.65kW and combi microwave - 3.6kW protected by a 16A mcb. Would a 2.5mm for each appliance from the cu to a 20A DP switch surffice over a 20m run? Thanks
  8. C

    Oven won't switch back on

    Ok, so basically I turned the oven off at the wall when we went away for our honeymoon, came back yesterday switched it back on and now have no power at all. I've checked fuse box and the plug attached to the switch works, but other than that I don't know what else I can do before calling out an...
  9. Dartlec

    Oven fan for BT2760SS range Oven

    Has anyone had experience of replacing oven fans on Baumatic ovens? Landlord has a tenant with a BT2760SS range oven, which is one of the 900m wide big things, with gas hob and electric oven. Earlier this year, just before lockdown, I bypassed the timer clock circuit which had failed and...
  10. P

    Smeg Victoria main oven won’t heat on eco mode.

    Works on all modes except the eco mode. Elements and stat seem fine. I’m a bit stumped. Any ideas? Thanks in advance.
  11. D

    Oven Element Support Bracket

    Hello from a new member. What has brought me here is a question about the nature of the supports inside an oven for a heating element. I'd appreciate advice. I ordered a new element for the oven base but when I fitted it one side doesn't quite fit completely into a metal 'rest' bracket welded...
  12. B

    Oven supplies ??

    Is it a general rule of thumb that any oven below 2.9 kw go on 1.5mm flex and 13amp plug top? Any thing above 3kw has to be hard wired ? Thanks in advance
  13. A

    Oven Door Glass

    Hi I know this is non-electrical but I need some advice, the inner most glass pane shattered in my oven and the middle glass pane seems to have slipped down. I ordered new fixings and replacement glass for the inner most door. However the middle glass pane is not stable and wobbles (see video)...
  14. R

    Electric Hob and Oven connection, one supply.

    Installation of a cooker in a renovated property, electric oven and a separate induction hob. The hob was to be gas - now with the induction hob, can it be fed from the oven radial via a dual wall outlet? The radial from the Consumer unit is 10mm T + E. The local isolation requirement can be met...
  15. R

    Max demand for double oven and hob

    Just some clarification please. Max demand for cooking devices. OSG says 10A + 30% of "connected cooking appliances in excess of 10A + 5A" if a socket is available in the isolator. The oven and hob are two devices. Does the 15A apply to both of them or just the first one? eg: Oven 4.8 kW Hob...
  16. T

    Oven grill

    My zanussi free standing ovens grill trips the main fuse after use when switching off. It most likely an element issue?
  17. Y

    New Kitchen - Double oven circuit questions.

    Good even, I am having a new kitchen installed and i just wanna double check a few things, having spoken to a few sparkys at work i seem to have the just of it, however im looking for clarity before getting quotes. Back ground. The kitchen is a complete rewire so that it will now have its...
  18. C

    How to get off Bosch oven element which does not have screws

    Hi, I need to change the element on my Bosch HBN2350GB oven and all the guides online show elements screwed to the back of the oven with normal screws. Mine though just had weird sticks as far as I can see. Does anyone know how to detach this/what tool is needed? Thanks in advance!
  19. C

    Lamona HJA4620 Oven tripping circuit

    Hi, first post here ... I have a Lamona HJA4620 oven that keeps tripping the circuit when I try using the main oven. The oven is hard-wired to a dedicated circuit. The top oven works well but the main bigger oven trips the circuit after about 5-10 mins heating. Initially, I thought the problem...
  20. M

    Wiring the terminal block on a Login oven

    I'm trying to wire up a new Logik oven and it has a non-standard terminal block, much smaller than that on the oven I just replaced and all the YouTube videos I could find. It looks like you just screw the electrical wires in directly. So, I guess I should remove the connectors and screw the...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top