pir | Page 5

pir

Recent contents View information Top users
  1. J

    PIR timer override

    As always, I'm a level 2 student so please ignore the ignorance. Is it possible, and if so how, to wire up a PIR with a switch that has the ability to turn the light off after the PIR has been activated. Or in all cases do you have to wait for the timer to expire? Side question - are there...
  2. M

    Outdoor pir lights

    I have one outdoor light with a pir, can I just add another pir light to the same switch and run the cable to that one ?
  3. J

    Adding a PIR to existing light

    Hi, I have an outside light that I would like to add a PIR to while keeping the ability to continue to use the switch as normal, do I simply add the PIR in parallel to the switch as shown in my excellent high quality attached drawing? :) Or will this damage the PIR when the light is turned on...
  4. G

    2 groups of light on 1 PIR

    Did a search but couldnt find any answer please forgive me if this has already been covered. So im looking to install 2 groups of outdoor lights 1. To illuminate the patio area 2. To illuminate along the path I am planning to wire each group through a centre off grid switch and would like to...
  5. J

    Garden lighting with reliable PIR's

    We have a garden footpath 16m from front door to garden gate with a shed near the gate. I am looking for the following set-up: a) an independent PIR sensor x2, one at each end of the circuit b) these to operate 3-4 LED spikes or low level spots between the two c) plus a floodlight to light the...
  6. T

    UK BACK GARDEN LED FLOODLIGHT WITH PIR SENSOR (UK)

    Hi guys, Im looking at fitting a floodlight in my back garden. It is a 30w LED with PIR sensor (bought from Toolstation). Ideally, I want the PIR to work incase of any intruders in my gardeb, but also I want to be able to leave it on permanently with switch operation. I therefore need help on...
  7. HappyHippyDad

    Discreet or hidden PIR?

    Evening everyone. It makes a nice change to be asking an electrical question rather than talking about the other thing! My customer some low level recessed lights (facing down) in their new bathroom. They want these lights to come on at night as they walk into the bathroom (there is no door)...
  8. T

    Replacing FX-360 PIR

    Hi, I am a retired electrical engineer but know little about home security systems. I have to remove or replace aged OPTEX FX-360 PIRs connected to a TS510 domestic intruder alarm control unit. As far as I can gather, each PIR has a 4-wire connection to a particular zone input on the control...
  9. B

    PIR Continuity

    I bought a PIR for an installation the other day and I was intending to use it for a contact but as soon as power is applied the live and switched live have continuity whether the PIR is triggered or not, I’ve tested a couple of different PIRs already installed and this doesn’t seem to be the...
  10. Bobby34

    External PIR (LED)

    Hi guys and girls I'm doing some work on a old cottage and the clients want an old outside PIR light replacing. The circuit is on the lighting circuit but I can't see where the cable enters the property I can only see where it cones out the wall from on the outside. There is no FCU on the...
  11. M

    Pir entrance light flashing

    Hi. My PIR entrance light flashes on and off about 4 times before turning off at the end of its time cycle. Any ideas what might be the cause/ remedy for this? It’s been installed for a couple of years and has only started doing this a few months ago. It’s bloody annoying now.
  12. J

    Outdoor lighting pir

    Hi, I recently replaced one of three outdoor pir lights which worked fine. today I installed the second one, which didn’t go so well. It’s not working and now neither is the first one I installed. does anyone have an idea of what could cause this? I am by no means an electrician and my...
  13. A

    Asbestos check before fixed wire test

    Hello all. I'm starting to do more fixed wire testing at my company and wondering about asbestos checks. The last company I worked for (was an apprentice at the time) didn't check any asbestos register before starting the test so just wondering where to stand with it. These will be commercial...
  14. C

    A good make of PIR.

    Can you recommend a good make of PIR for outside LED’s please. The Screwfix ones lasted a month or so before they filled with water. The current ones from B&Q lasted a bit longer but after every time we have heavy rain they are constantly on and off. Need to have adjustable angle with 3m...
  15. R

    New PIR sensor problems

    Hi I have 2 lights on my gateposts operated by a single PIR. The PIR has failed so I have tried to replace it myself (with this one 180° PIR Sensor Black - https://www.toolstation.com/1800-pir-sensor/p11555) but now only one of the lights will come on. I have taken a photo of the before and...
  16. T

    LED Lighting with PIR Sensor

    We are installing LED 180W High Bay lights. Most areas have 2, there is 1 with 3 and 1 with 4 so most are 360W, 1 is 540W and 1 is 720W. The PIR sensor we got said it could switch 2300W but after opening the box, it says max LED load is 100W. Why is this? Will the PIS be okay or will we need to...
  17. J

    Which led pir floodlight?

    We need to install two floodlights outdoors in a very exposed position, they are also inaccessible and need a big scaffolding job to span a small river to fit/maintain them. So we need some that are reliable! Can anyone recommend any - we know that there is always a possibility of a failure...
  18. HappyHippyDad

    Is there a PIR floodlight with remote control override?

    I am looking for a floodlight 20-50W with a PIR which has a remote control with it that can switch the floodlight on or off. Is there such a thing? Cheers all :)
  19. J

    30W LED Flood Light with PIR & Manual Override

    Gents Having a lot of trouble sourcing a 30W led flood with pir that I can reflex with an additional core to bi-pass the pir. Ideally it would be great if the flood came with this "bi-pass wire" but cant source anything that isn't sealed. Has anybody been down this road? Can anybody...
  20. S

    PIR sensor wiring

    Hello gents. First time posting here and need some help. I have two bathroom and I want to instal one in line extractor fan to service the bath room connected to the lights and PIR sensor in a way that if you go to bathroom one only lights for that bath room comes on not the other but the...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top