plaster

  1. J

    Wires buried in plaster vs oval conduit

    We have recently had some electrical work done in our house and the electrician simply clipped the cables to the wall which was later plastered. When I have done similar wiring myself (before the current regulations - I do have a degree in Electrical Engineering) I have always used oval PVC...
  2. S

    Astro plaster in down lights..

    Hay guys new here... I'm going to been given some plaster in down lights to fit by my client. They are made by Astro. Has any body any experience with these fittings. I've fitted the Collingwood version many times. They are a 2 part fitting Bezal and an led unit with built in driver connecting...
  3. T

    1st fix protection from plaster

    Good afternoon ladies and gents... I was talking to my plasterer and he mentioned a plastic cover for back boxes to pop on after the first fix.i will be working with this plasterer regularly so i want to make both our lives easier. Do you kind people have any ideas as to what they are called as...
    • taranjit singh
    • Thread
    • 1st fix box plaster protection
    • Replies: 27
    • Forum: UK Electrical Forum
  4. FatAlan

    Fill me in please!

    What fillers do folks find easiest to use for filling in around minor works like chiselling into walls for back boxes etc?
  5. G

    Safe Zones, 230yr Old Cottage

    Hi New here and hoping someone may be able to provide some advice. I'm not a novice from a wiring perspective but from a regs perspective I haven't got a clue. I will also be engaging an electrician for a load of works but need to do some prep work as part of renovation and route planning. I...
  6. R

    Just had full rewire done, cables very close to surface or coming through skim

    we just had a full rewire done on a 1920's property. Electrics been completed and signed off with certificate. Making good on wall chase areas done by plasterer hired by electrician. We have just come to decorating and found that in a few areas the cables haven't been chased deep enough and are...
    • rich888
    • Thread
    • cable cables close coming plaster plasterer rewire surface through
    • Replies: 47
    • Forum: UK Electrical Forum
  7. J

    Cutting 300mm hole in lath and plaster ceiling?

    I have to fit a condensation control fan (PIV) into the hall ceiling. The hole needs to be about 300mm and the ceiling is lath and plaster! Any tips for cutting the ceiling without damaging the surrounding lath and plaster? Cheers
  8. cgfw201

    Drilled through a cable embedded in plaster, easy fix?

    Hi there Been a bit of a pillock and drilled through a cable when putting a shelf up. It powers the ceiling light in my kitchen and nothing else (pretty sure anyway). I've gone through the live wire but not the earth which is still safely encased in it's sheath. There's a small gap between...
  9. J

    Isolating electrical sockets in preparation for removal of plaster for damp work

    Hi, I am having internal damp work done and have been asked been asked by the contractor to prepare by isolating the electrical wall sockets and removing the faceplates and sockets. I have 3 double, surface mounted sockets to isolate. There is a short section of trunking from the floor boards...
    • joe99
    • Thread
    • blocks damp electrical electrical work isolating plaster removal sockets work
    • Replies: 2
    • Forum: DIY Electrical Advice
  10. P

    Stud Detector recommendation

    Hi Guys My colleague and I are currently looking to purchase a new stud detector but at the moment are struggling to find one that will detect stud, and cables through plaster skim and concrete. Could anyone help with recommending a detector they use that will pick up stud, conduit and cables...
  11. J

    lathe and plaster and downlights!!!

    Any tips on cutting 76mm holes (20+) for LED downlights in L+P ceilings?? brand new 76mm yellow starrett cutter and 36v drill.....barely scratched the surface on ONE hole and the teeth are already near blunt! cheers guys
  12. E

    Lathe & plaster walls

    What do you do when the builder is being a cheap &@?! and won't pull them out? I either chisel a bit out of the uprights or get a bit of wood that spans between both. Any other ideas that don't involve a 16mm back box?!
  13. D

    Channelling cables in the plaster of ceilings

    I have been doing some subbying work for an NICEIC approved sparks. He will channel out the plaster of ceilings to run new cables in. For example, today there was on light in a ceiling in an corridor and we were removing this and replacing with 4 spotlights. So the spark said to take out the...
  14. G

    Weird painting problem in a bedroom where a cable is below/buried in the plaster

    We have just repainted our spare bedroom with our normal emulsion paint and noted a vertical streak from the ceiling down to a socket. We repainted over the streak but the streak reappeared. I used my cable detector and established that the cable run was directly under the streak. The streak...
    • greeny
    • Thread
    • bedroom cable plaster problem weird where
    • Replies: 19
    • Forum: UK Electrical Forum
  15. cliffed

    Lathe plaster ceilings

    Fitting of recess led lights into lathe/plaster ceiling,becoming a right pain.Holes were drilled during 1st fix with hole cutter to suit size.When inserting fitting,springs take out load of plaster,which actually just falls away,so looks crap.Decorators not too pleased,lighting consultant also...
  16. M

    Best tool for finding wood ,wires,metals behind plaster boards

    hayy whats the best tools for finding woods , cables , metals etc behind plaster bored im fed up of drilling a hole to find beams etc, thanks guys -mike
  17. R

    Type of 3 Phase supply cable?

    Hi, Iv found a 3 phase supply cable in the basement of a restaurant. It had been plastered over and I'm curious if this type of cable is legal. It had been installed a long time ago but is Red, Yellow and blue phase colours, it obviously has pvc covering over the copper, then half of the...
  18. S

    changing wiring that runs behind plaster.

    Hi, I need to change the cable that runs from the switch to the porch light fitting. I have the floorboards up and the switch disconnected but cannot budge the cable, other than remove the plaster on the wall i am stuck. Is there a trick of the trade to doing addressing this problem.
  19. F

    Lat and plaster

    Had a nightmare lol trying to get fixing for light switch boxes today any tips
  20. Guffer

    Plaster Depth Boxes with Screw Protection

    Hi anybody know if its possible to get metal plaster depth boxes where the 3.5mm accessory screw is encased, as they are in surface boxes and plasterfix boxes so as to prevent tilers screwing back through cables. Never given it much thought before but it makes sense.
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

TrueNAS JBOD Storage Server

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
Back
Top