please | Page 3

please

Recent contents View information Top users
  1. M

    PATesting a kettle: Please advise

    This kettle is a Breville model VKJ367. This is one of these fancy kettles for hot drinks. Instead of tipping it & pouring out, it dribbles through a spout & you must place your cup underneath. It looks very handsome & passes a formal inspection. But it has several pieces of metal trim and some...
  2. Popabear

    LED indicators I just fitted on my Suzuki drz400 2018 are not working correctly please help

    Hi all as mentioned I fitted two new stedi led indicators to my Suzuki 2018 drz400sm the front ones not stedi were fitted by the previous owner but seem to be running a little fast however the new rear ones would only flash twice then stop same every time I called the store and was told they...
  3. J

    Garage extra internal and external sockets help please

    Howdy, I'm looking for help with my plan to install an extra internal double socket and an external double waterproof socket to my garage. I believe its a radial circuit at the moment, with mains electrical supply coming from the house to a fused circuit board, 30A fuse to current double...
  4. J

    Could somebody please tell me what the name of the below circuit is please

    Hi all, does anybody know the name of this circuit and how it operates and the purpose of each component please? any help is much appreciated. Thanks in advance
  5. J

    Could somebody please tell me what the name of the below circuit is please

    Hi all, does anybody know the name of this circuit and how it operates and the purpose of each component please? any help is much appreciated. Thanks in advance
  6. J

    Could somebody please help me understand this circuit?

    Could someone please explain to me what this circuit is used for? I believe it is a full wave bridge rectifier but I'm unsure as to what the zener diode is used for in this arrangement? Thanks in advance
  7. T

    2365/615 Question 5 Help please

    I'm just wondering if anyone can point me in the right direction with this question I'm struggling to work it out.
  8. NackJich

    Parasitic drain need testing advice please

    Hello again. My car battery is draining completely overnight. I charged it up and ran it through a fairly decent battery tester which resulted in a GOOD BATTERY advice at the end. It tested charging, cranking response, load at 2500rpm etc. A known old battery was a fail, so I'm reasonably sure...
  9. MaintenanceSpark

    UK Can anyone help date this cable please?

    Hi guys, Whilst renewing my loft insulation I came across a few runs of very old cable. (Please see attached pictures). These cables are lead sheathed and looks to have a very brittle black insulation around the tinned copper or aluminium? The red and black is wrapped around each wire in like...
  10. Rosecom

    UK Seaward ntb-1 INSTRUCTIONS FOR USE PLEASE

    Help !! Need a diagram as to how to use the ntb-1 rcd tester, not sure as to how to use it with my pt250+
  11. sythai

    UFH pump help please.... ??

    Hi Guys Just seeing if anyone can help please. Does this pump come with plug in type/ pre flexed feed (hopefully that makes sense!) as cant see how to get inside to wire it up ? Where its located have zero room and struggling to get in and see properly (thanks plumbers !) Cheers Sy
  12. G

    Help with cable calculation please

    Hi Help please with the adiabatic I am doing a small design for my course and I can't figure it out. Any advice will be appreciated. Ring Final Ib: 30A In: 32A It: 20A Iz: 21A 2.5T&E method 100 V: 229V Ze- 0.22 Ohm L: 26m So r1+r2 = 19.51*26*1.2/1000=0.6 Ohm. R1+R2 = 0.6/4 = 0.15ohm...
  13. aworldturns

    Mainline Attachment Break Advice Please

    This is off the mainline above the weather head. On the end the wire got pulled out after a tree fall. Was this a fix from a previous wire rip? Can someone suggest how I could go about fixing this or should I just pay the electric company to fix it? Im thinking just buy a new adaptor and...
  14. K

    can someone help me please

    really really need help hi guys i am doing my project where you have to design for the hotel and pool area just wondering if anyone can help me out on all of it many thanks
  15. A

    URGENT - Please advise if this wiring is correct?

    I have a tenanted property which I bought about 7 years ago. I went into the loft because the pull switch when turned on was causing a short. I called an electrician but he turned out to be useless. In the bathroom we have a round bathroom light, pull cord switch, an extractor fan and an...
  16. A

    Please help, I need advice to build a case

    I am in a bit of a pinch at the moment and trying to argue a massive amount of used of electricity with my provider which I find it hard to believe for my living circumstances. I am a single person who lives in a one bed flat and is out of the house from 9-5 during the week days, I am on an...
  17. C

    Advice please on a 220v receptacle

    Hello and thank you for accepting my request to join the forum! So, I have had a Miller 140 welder now for 5 years or better and it has suited me fairly...until now. I purchased a mini jet boat project and I need a welder that will handle aluminum welding better, a 220v unit is needed now. What...
  18. I

    Smart dimmer module recommendations please

    Please can anyone recommend a smart dimmer module for use with Aurora LED GU10s that remembers the dim setting on loss of power so that the lights don't come back on full brightness (or, even worse, remain off) when power is restored? Ideally Wi-Fi controlled. There isn't sufficient space in the...
  19. L

    Is this normal? Please help!!

    Does this look normal? I live in a apartment and this is what the wall and the ceiling look like above my electrical box. I also can not plug maybe more than 4 things in at the same time without blowing a breaker.
  20. HappyHippyDad

    Some advice on infrared heaters please.

    Evening all 🙂 I have been asked to quote for installing infrared heating panels (smart) throughout a house. This will be a first for me and I thought I would talk it through on here. In total 5.8kW. Top floor is 2.7kW (3 panels and a towel panel) and ground floor is 3.1kW (4 panels). These are...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top