Evening all,
Doing a bit of forward planning for an extension with possible electric ufh. i Have worked out room will need 25m2 split between 2 matts 15 and a 10. 150w per square meter matts. I work out as about 16.3 amps in total. Only one stat so a contractorwill have to be fitted.. if...
Hi .
I have a EICR that has failed . Can anyone please advice if some of the suggestions on there are legal requirements or not as there was an EICR on the property in 2014 and there was no problem with some of the things recommended in this report. For example :
1. -Remove & install new LED...
hi can I anyone help me understand wiring one of these l, also what capacitor needed. I want to use with a speed controller. To be used on DIY reeling machine Any other tips thanks in advance.
Is this PILC?
Found today, running along an external wall, with some all-round band for extra support...
Always interested in odd cables, so please let me know!
Hi there
I wonder if you can help me please?
I have a problem with the drivers side rear lights on my (2007) Audi A6. (includes taillight, reverse light, brake light and indicator.)
All other lights are working perfectly.
I am baffled because – when I’m stationary – before setting off – all of...
I'm going to need to make some 'temporary' UPS systems next year - I'll have to find possibly some rack mount units that can live in an outdoor cabinet, probably I guess with a fan involved too for ventilation. Only need to be 3kVA, nothing 'clever', no computers to link to or anything like...
Hi I'm soon to take the City & Guild 2396 course.
Upon reading the examiner report in particular December 2016 and June 2017 in the section "Verification" it states the following
December - 2016
"Majority of candidates were unable to explain the correct method of verifying Separation despite...
Two wires have disconnected when I moved a double switch for painting. Any ideas where they go please? I guess the live at the top goes into the com but no idea where the live at the bottom should be connected. I’m a complete novice so don’t want to do something that may be dangerous!
And the 1st thing I see is Smeg cooker tripping randomly.
So Here's My Issue Have Spent Numerous hours trying to talk to someone at Smug Smeg, Only to be directed to another dept of Smeg And yet another.
So the Issue, approx every 8 to 10 months . Oven rarely set to as high as 220. Normally...
I have recently had installed an 8 PV panel and inverter on to my roof. This was a local authority initiative which was installed free of charge. The system has been working and reductions in my electrical usage is being assessed. I was so impressed with the reductions that I have had a further...
Hi All,
New to the forum, looking for some advice.
I'm a fairly competent DIYer and have completed some other minor electrical stuff recently... I'm looking to install some outdoor lights in my new house as currently have none. There is no existing lighting circuit outside or sockets, however...
Hi all please could someone help, my ovens keep tripping the rcd see images for details basically from the cu I have 63 amp rcd with a 32 amp mcb type b from that run in 6mm t&e to an isolation switch 50 amp then more 6mm cable to a dual cooker outlet then 2x flex runs to 2x single ovens 2100w...
Hi. Please can someone offer me advise. I have a 1 bedroom flat with storage/comfort heaters (don't know which) that I don't turn on as I can't afford to run them. I have always had really high electricity bills and two metres which are supposed to cover day and night usage. Scottish Power...
New switch has an earth terminal in the back box and COM, 1 WAY, 2 WAY on the switch. My power in and pond pump have live, neutral and earth wires, what goes where please?
Hello everyone,
Someone asked me to replace the tube lights with the LEDs (5 feet long). In total i got to change 20 of them and to rewire about 5 lights (10m length).
How much reasonable i should charge him.
Thanks
I need to augment the underground supply to remote workshops at my own house.
I’m struggling to understand the practical implications of voltage drop, rather than using blind compliance with recommendations/tables/regulations which do not take account of individual circumstances.
Here’s the...
Hi, I have just had a full rewire done on my house by a Napit registered company whom I didn't realise at the time where allowing none registered persons to do the work. I have had to call them back several times to many issues I came across and am now concerned about the safety of the rewire. I...
Hello,
I have a question regarding certification if anyone can constructively help please... I am a registered domestic installer (looking to go AC very soon).. I've been asked by a landlord to install a new CU in one of his properties connecting to existing cables (tested of course)...
I've...
Hi Guys
Done CU (peak & off peak) upgrade last week, they've got EDF Economy 7.
E7 only does an overnight immersion, rest of property is on the peak supply.
Had call from customer saying E7 overnight immersion is not coming on ? Just trying figure out what may have happened.
Tested out at...
Hi there, please help. I live in Florida and am replacing a ceiling fan in a bedroom. The new fan has no pull cords and no remote. It came packaged with a wall switch that has a light dimmer dial and a 3-speed adjustable fan dial all in one switch (See attached photo)
The wall switch that came...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc