project

Recent contents Top users
  1. G

    2365 Level 3 Design Project. Volt Drop feed to Summer House and earthing

    Afternoon Gents, just a query regarding volt drop and extending the equipotential zone on a PME in the level 3 design project. In my design I used a 16mm armoured and the associated volt drop was 5v, this left 1.9 volts for the lighting ring in the summer house. Tutor said not to worry about...
    • Gurnatronics
    • Thread
    • 2365 design earthing house level level 3 pme project summer trainee volt volt drop
    • Replies: 16
    • Forum: UK Electrical Forum
  2. A

    New build bungalow project

    A friend of mine is currently building a 2 bedroom bungalow and wants me to wire the house up. I've never been involved in a new build before especially a bungalow. I understand part p needs to be taken into account. I have attached the plans to give a better Idea There will be two bedrooms...
  3. G

    Help w Switch on Hobby Project

    Hey Everyone I just wanna start off by saying I dabble in little bits of electronics for prop making - just lights and sounds and stuff, motors, pretty basic stuff. I bought a switch a while back with the intent to use it and did not... I was wondering if someone could help me with putting it...
  4. C

    Introducing. Van (Ambulance) to Camper Project

    Just introducing as per the automated message - very swish. Am converting an old 1989 Transit Ambulance to a camper at the moment and sure I will run into a few headaches with electrics. If anyone has any tips of experiences to share that would be great. Thanks
  5. R

    2365 Design Project - May need some advice.

    Hello Everyone, As many of you know I am doing my Design Project. I am working on Q4. I have had a go, but I am unsure of some of the questions. I was just wondering if it would be possible to get some advice on what I have done, whether it's correct or not. Also for Q1, we need to draw a...
  6. H

    Electrical Pool cafe project

    Have any one don pool cafe assignment. Please i need help. much appreciate.
  7. R

    Question 2 on Design Project

    Hello, I am just starting my project. I have uploaded the questions. Questions 2B & C Socket for the kettle - each of the tables. Socket for TV - next to the Kettle, as I assume it's not wall mounted. Two single sockets for Laptop/phone to each side of the bed FCU - by the main entrance...
  8. R

    Level 3 Project - Advice

    So I’ve completed my Level 3 302 exam and got a Distinction. I’m just starting my project now. It’s a Pool, Hotel Rooms and Dining Room/Kitchen. Seem okay so far. Any advice from people that have done it?
  9. S

    Help please: 2365 Level 3 Unit 305 Design Project

    So i'm a little confused at the min with the adiabatic equation to verify minimum cpc csa.. My circuit is a 16A socket in 2.5mm singles (bunched in conduit) I worked the Zs out to be 0.26Ω To work out the minimum cpc csa to satisfy ADS i'm not sure if I should use the Ipf of the circuit...
  10. K

    Electrics Revamp Project

    Long Post Warning Lots of Questions: Thank you in advance for your patience and advice: Hi All In the next few weeks I'm planning to have a fair amount of electrical work done. The main project is revamping the electrics in the garage. At the moment the garage gets its power via a 2.5mm twin...
  11. M

    Electrician Jobs Brighton project seeking gold card electricians

    Morning all, We have a new project starting next month in Brighton and will be seeking labour for the project. We will be looking for gold card electricians who are strong at installing containment. Up to 18 months work available for individuals starting at the start of the project. Work...
  12. Loki

    Inrush current for pool lighting - pool cafe hotel project

    Hi, Just a quick question regarding inrush current for my pool lights circuit in my pool/cafe hotel project? I was looking at 5 of these: Pool LED - https://www.apollolighting.co.uk/products/pool_led/ 125W per light (5x 125 = 625W / 230 = 2.72A) Issue is that the inrush current per light is...
  13. S

    Approved Electrician, distanced learning. Installation project

    Afternoon gents and ladies. I didnt do my distance learning during my apprenticeship due to me being a complete idiot so I am doing it now, anyone done it recently? Or ever? Fancy helping me out as I am at breaking point.
  14. Baddegg

    Pub project now under way............

    As per previous thread a wile back the pub build is now under way and upto roof level,just wanted to check my proposed electrical feed if I can please? Earthing is TN-S not TNCS previously thought,(customer has now cleared the meter cupboard!) Anyway loading in the pub is as follows 1 x 32a...
  15. DrewGil

    Outdoor 30w floodlight, trainee first project.

    Hi Guys, I am about to start my first practical part of my sparky course, and need to put together a simple project for myself. I want to install a 30w floodlight (PIR) in my back garden. I have an existing wall mounted light that I want to extend from, on a 6A mcb and rcd protected lighting...
  16. grumpyjohn01

    Food dryer project

    Hi All, With some trepidation I am throwing this one out for comments / advice from members. I have been asked by a customer to provide 3 phase supplies for some 'machines' that are under development by my customer. The machines are basically cabinets for dehydrating food items , that have been...
  17. L

    Unit 305 - design project pool/café block

    Has anyone recently completed this unit towards their level 3?
  18. S

    Electrician Jobs Experienced Commercial Electricians required at Waterloo project

    Works are within lift shafts and include Installation of containment, shaft lighting and power. 12 months duration.
  19. S

    Next project, my own house

    Had a meeting with my architect so will be drawing up the plans and submitting them to the Proletariat Planning Department that controls the local area, was thinking something along these lines for the rear, different interior, layout and patio but I like the outline of the extension, thoughts...
  20. N

    Tesla Project

    Very good! I would like to tell you about a really interesting project that I have seen there on the web. The project goes more or less in the construction of machines that can work with free energy; some time ago, the Tesla company wanted and tried to build machines that were able to use free...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

TrueNAS JBOD Storage Server

UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
Back
Top