qualifications

  1. A

    What qualifications are required to work on domestic buildings?

    Hi Everyone, I would like to first start off with a little about myself, I am 19, live in Scotland, 3.5 Years through my apprenticeship as an electrical technician in the oil and gas industry. I currently have my HNC in electrical engineering and am about to complete my SVQ level 3 in...
  2. U

    qualifications

    Just a quickie, does anybody know whether the 2357 is one of these short course 'qualifications' or can it be done properly? I did a google but still none the wiser. Its not for me, unless it can turn my gold card into a platinum one! just something I've seen proudly advertised by a tradesman
  3. M

    What qualifications do I need

    Hi, I have 17th edition, 2392,2394,2395 and currently do all my work which is notifiable under Part P. I have been asked to do some wiring in a garden centre mainly for single phase lighting. Would I need to gain extra qualifications to allow me to undertake the work legally? If so what...
  4. L

    Can I sign off my own work? New 2014 laws?

    Can I sign off my own work when carrying out electrical installations? I am currently employed as an Electrical Maintenance Engineer and work with everything from 33/11kv transformers right down to installing a new light. I work with everything from switchgear, busbars, motors, VSD's...
  5. P

    Fire alarm qualifications

    Hi I have been asked to install a fire alarm in a new industrial building, do I need any special qualifications for fire alarms? I have a fire alarm manufacturer who will design it and supply all the parts, just not sure if I need any extra qualifications, I am a fully qualified electrician of...
  6. R

    Qualifications to be able to test and certificaate

    Stand by stand by Question as a person who is of the older variety I trained to be a 'leccy' on leaving the RN a few years ago and acquired C&G 2361 and 2362 ie to the 16th edition of the regs. I would like to know if its possible to get the required certification to test my own work. If yes...
  7. D

    Qualifications (and other requirements) required to change a consumer unit.

    Hi, I moved into a property about three years ago and I would like to renew an old Wylex rewirable fuse consumer unit. There are no RCCB's currently so the upgrade is primarily for safety and to add a few spare ways for some upcoming building work. I suspect that some of the circuits will be...
  8. M

    what other qualifications should i get?

    i currently have my level 2,3 2365 and 17th edition. im going to get my testing 2394 and 2395 in jan. and nvq and am2 along the way. what other kind of qualifications are need'd or are handy to have? i seen a course for pat testing "c&g 2377-22" but wouldn't wouldn't you be competent to...
  9. O

    Qualifications required for UK

    Can anyone offer any help with following query regarding qualifications. I am returning to the UK after 30 years in Australia. I have C & G from British Steel as an Electrician (1975-79) Came to Oz in '82 and my Quals converted to Electrical Fitter. I also have restricted Electrical Contractors...
  10. S

    JIB Electrotechnical Certification Scheme (ECS) Joining the jib/Ecs/grading Advice needed.

    Hello there, Im trying to re-join the jib so I can get graded with my qualifications I was in the jib as a labourer from 2002 - 2008 until I got made redundant Then I started collage and now have 2330 level 1 & 2, 17th edition, ecs, cscs.(I don't yet have my ecs card just my assessment...
  11. I

    Help ! qualifications in 1978 lost in transit

    Does anyone know or remember what city and guild courses were in operation in 1978? lost my certificates, FJH
  12. S

    Simple clarification on qualifications needed to become an Electrician.

    Hi, and thank you for answering this question. Apologies in advance for lack of knowledge in your field. I am currently looking into doing a part time course in order to become an Electrician, however on looking into it there seems to be 1001 ways to get there and they all say they are the...
  13. Mikaelo

    JIB Electrotechnical Certification Scheme (ECS) Do I need something more for cscs or jib car?

    Hi there, i have covalidate my spanish title in Installing Electrotechnical Systems and Equipment throught Naric, and the whrote my telling that its a NVC and also falls betwen NVQ level 3 and 4. I am ready to do my 17th edition exam now. my question is will i need something for ro obtain a...
  14. E

    What qualifications do i need ? that will set me up straight into work ?

    Hello everyone !! i have studied EAL electrical/electronic diploma level 2 and 3 in college. I rang up a training centre for the 17th edition who told me that all i need is the 17th edition for now and the inspection and testing for better success with jobs. i already have knowledge of...
  15. D

    Need help on getting the correct qualifications.

    I done a full-time electrical installation course at college when I wad 18. Then during the second year I ended up working for a self employed sparky for cash in hand. He made it clear he wouldnt pay for my nvq and this was for the experience. It started being a few days wiring then labouring...
  16. E

    qualifications

    Hi Guys, Looking for some help with what i'm qualified as. I currently hold the part one qualification (level 2). my regs exam with the amendment, my 2391. solar PV, and a building regs exam. I am very capable of doing the job and the knowledge of it all but am unsure of what I am classed as or...
  17. J

    working in holland ?

    can anyone help with finding out the requirmnts for working in holland i do mainly commercial/ industrial installations and im looking for a start on a site out there can anyone point me in the right direction thanks if not holland maibie somewhere else
  18. I

    Electrician Qualifications.

    NVQ level 3 (C&G 2356) and 17th edition (2382) , 2330 Are these the qualifications you need to legal work as a domestic electrician? Can you just buy books read and take a test or is there some kind of work related dimension? i.e working as electricians mate and being assessed in the...
  19. T

    Working while studying

    Hello! I have a couple of questions that I hope that someone in here might be able to answer. I have been searching and googling, but it's difficult to find answers that fits my situation. I've been trying to find a job here in the UK for a few months. I've moved to the UK from Norway. In Norway...
  20. E

    Finished AM2

    Hi anyone who has any information about after passing Am2 exam cause i am not clear yet? Will i be able to sing domestic,commercial and industrial job please thanks
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Daily, weekly or monthly email

Back
Top