recommendations | Page 7

recommendations

Recent contents View information Top users
  1. A

    Looking for 200W LED Floodlight brand recommendations

    I'm looking for any recommendations (or avoids!) for 200W LED floodlights. The application is to illuminate a small field (roughly 30% smaller than a soccer pitch) for canine agility at an animal rescue shelter . The installation will be a donation with a small contribution from supporter...
  2. pirate

    Recommendations please for a good quality immersion heater timer

    Hello all. As the title says, I am looking for a good quality, robust switch/timer to control a 3kw immersion heater. At present it is simply plugged into a socket in the loft, but needs to be controlled from the kitchen below with a decent timer, preferably one that will fit onto a single...
  3. leep82

    Smoke/Co alarm recommendations

    other than aico can anyone recommend any? Im looking for mains powered with battery back up and will require a combination of smoke, heat and Co detectors. Nothing against aico have used them many times amd will do again. The customers on a current job have asked about alternatives as they dont...
  4. S

    Underfloor heating bathrooms- recommendations?

    Got two underfloor heating systems to install- both on timber with a tiled finish. Both bathrooms are around 2 x 2. What systems have people installed and what recommendations have you got?
  5. TheGronk

    Time clock recommendations

    can anyone recommend a digital time clock, either din rail or surface mounted with count down the on-off with some kind of start button function instead of having time frames in which it’s on or off Many thanks
  6. T

    Recommendations for PAT machine anyone?

    Hi just wondering if anyone on here uses a PAT tester and feel any particular brand or particular PAT tester is better than any other? I use a Seaward Primetest 50 at the moment.
  7. rolyberkin

    LED Tape recommendations

    Hi All Unbelievably I have never fitted LED tape and have always chosen LED battens. I have an under cabinet approx 1.5m long, any recommendations for a make type or supplier gladly recieved along with any top tips for fitting.
  8. littlespark

    Fridge Freezer died. Recommendations?

    Ok guys, I'm sure not your usual points of interest. The fridge freezer?. It lives in the kitchen and the beer is stored inside it. Well, ours packed in while we on holiday. 15 year old hotpoint, so not a bad run. Looking at a Beko, as its in our price range. What are peoples thoughts? We know...
  9. NDG Elecs

    Recommendations for LED battens.

    Hi Lads n Ladies, Have been searching the web for some 4/5/6ft LED battens. Need around 14 in total. Want them to look smart, not break the bank, but most importantly from my perspective I want them to not be the fully sealed type that manufacturers are leaning towards. Reason being is so I can...
  10. S

    CCTV recommendations

    Hi All Can anyone recommend any simple CCTV set up ? It is for a customer who's mum lives in a bungalow, has an Ipad, needs camera front and back. She is getting to the point of not feeling safe in her home. 0100 hrs people knocking on door , small garden items being taken...etc etc Any...
  11. U

    Recommendations for timers for towel rail

    Hi all, Anyone got any recommendations for a timer for a towel rail. Timer will be outside the bathroom and would prefer a digital version. I've used a few before but some are a bit tortuous to program. Thanks a lot
  12. Marvo

    Clamp Meter / Voltmeter Recommendations

    I'm looking at purchasing a CATIII clamp meter. I need one that can give accurate current readings on dimmer panel leading and trailing edge outputs. I also need it to be accurate on PWM (DC) dimmer outputs up to around 40KhZ. I'd like the usual continuity/ohms/doide test facility as well with...
  13. charlie76

    Domestic Smoke Detector Recommendations

    Looking for advice on reasonably priced, reliable smoke detectors to fit the following, any recommendations would be appreciated: Mains operated Radio/Wireless Interlink Battery Backed
  14. O

    Switch fuse - metal clad recommendations

    Need to do a switch fuse install and I was wondering which products people prefer ........ Needs to be metal as the sub main is going to be SWA Thanks
  15. S

    D-light for timber. Recommendations please.

    Evening all, As the title says, I need recommendations for a down-light that can sit in timber. As far as I am aware the light needs to be "F" marked, for flammable surfaces. Ideally the light would be fairly shallow too. Thanks for your replies, James
  16. T

    Alarm system recommendations??

    Hi all,I'm in the process of buying a new house and i'm looking to install a new burglar alarm when i get the keys. Don't really have much knowledge of alarm system's, so im looking for a bit advice from you guys. Nothing too complicated! Its just a 3 bed semi, maybe 4 Pir's ,couple of doors...
  17. C

    P21W/5W LED Equivalent Recommendations??

    Hi Anyone replaced their filament P21W/5w bulbs with a red LED (canbus ready) equivalent? I'm looking to replace the brake/side light bulbs with red bulbs and indicator bulbs with amber LED equivalent bulbs. These are going in a cycle carrier hence I require coloured bulbs as the lenses are...
  18. J

    Security Alarm recommendations

    First fixed for a security alarm about a year ago in my house and it's nearly time for second fix, I've only ever installed veritas r8's before, what do other people use? Are veritas a good brand as I have nothing to compare them to. I would like perhaps some phone app connectivity, the only way...
  19. O

    Recommendations please - rechargeable work light

    Got a CU to change in a couple of weeks and there is no natural light! So I'm looking for recommendations for rechargeable work lights ............. preferably from personal experience Thanks
  20. Soulcraft Electric

    Recommendations for ferrules/crimps for Lewden RCBO neutral leads

    Need to shorten the neutral leads on Lewden RCBOs. Where do people source suitable crimps/ferrules? Thanks

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top