Hi,, I qualified to 15th edition IEE regs some 28 yrs ago. I then left the trade. I kept my hand in by doing foreigners and of course all electrical work on my own properties. I would class myself as competent and safe. I was wondering what restrictions there are on any work I can do, for...
Have listened to this one banded around many times.
Situation where some sparks argue that ground or 1st floor circuits should not be present at one switch as is often the case if a strapper drops down to the hallway 2 way feeding the landing with the hallway switch also within the same (double...
Reading the "Electricians Guide to the Building Regulations" today (ISBN 978-1-84919-889-9) section 5.7.5 Fixed Equipment, further down the paragraph states:
"Outdoor fixed equipment is not required to be protected by an RCD" That in itself does not ring correct to me I would expect an RCD to...
Hi, I have been asked to wire and cert a transportable storage container that's is going to be used as office. Basic ring circuit, couple of fan heaters 2x lights, db board. I am a domestic installer, do I need to be full scope to do this and also what kind of certification is required? Any help...
Hi all
At the risk of repeating what may have already been discussed, does anyone know any authorised 17th Edition courses which are in South East Sussex. I have completed 16th Edition.
I have found
www.ableskills.co.uk/electrical-courses/17th-edition-courses/ (In Dartford for £375 inc)...
In a new build , I have noticed how the Sparks that have wired the house (4 bed 3 storey town house)
They have put the kitchen appliances sockets/kitchen worktop sockets/boiler fcu/1st floor sockets/2nd floor sockets on a 32A ring and the ground floor sockets only 4 sockets on another 32A ring...
For a laugh I went on line and completed the "Part P test" no I didn't do the course, did it just for fun, it seems to me that if the questions are similar to the ones I answered, yes I passed before anyone has a dig, cover more than just part P of these regulations.
To that end would it not be...
Is it my imagination or are we seeing a ridiculous number of threads with this kind of question? Sure, some are just trolling, but many of them look like genuine queries where people want to know a the number of the reg that says whether it's OK to install 2.5T+E clipped direct to some 4x2 to...
We have to rewire a house in Scotland in January, does anyone know if for notification we have to do as here in England (go through a organisation such as Niceic,Napit) or it is different there.your help would be much appreciated.
I've not been active as a sparky for a little while, so bit rusty on regs. Esp. the new ones :-)
Can anyone tell me if I should be worried about the sparky doing my kitchen?
This is the finished wiring.
Hi all. I'm not an electrician but would like some advice please.
The fuse board above is what is in our new property. A single old man lift there before us and only had few appliances.
We're now being told our house insurance will be void if we don't get it upgraded and it needs doing for...
Generic title as since I'm going through the book I might have more than one question (which I have so far).
So, first question. Can somebody explain
559.5.1:
At each fixed lighting point one of the following shall be used for the termination of the wiring system:
(i)...
(ii)...
(iii)...
Hi guys, been quoting for a lot of smoke detection upgrades for landlords. Had a look at a job today that has an open plan kitchen/living room, does anyone know what is required here? Going to have a google once the kids are in bed, just thought I'd ask the question!
Hi there.
Interested to know what anyone thinks about these plug-in solar power stations which are coming onto the market. These things are wired (via a Switched Fused Connection Unit) into the mains power supply. This system dispenses with the feed-in tariff and can apparently be installed...
Hi everyone,
I was asked to fix a messed up ring. The client doesn't want to tear apart everything and asked if it will comply with the regs if it is done like this - Let's say we have a ring with three points and a spur from each point. The point is that the three points on the ring will be...
I have an EIC from a customer for a domestic property, dated Dec 2005, which covers the installation of a new consumer unit, to bring the installation up to date (at per the regulations in force at that time, stated as 2001 amended to 2004).
There are two socket circuits, would you have...
Hello Fellow Sparks.
Can anyone tell me what they do with their old regs books. As I've got amendment 2&3. I have done my 17th with amendment 2 so it's got lots of regs highlighted and a few calculations written in the book.
I have also done I&T with it so it's got lots of extra info in.
Thanks
Hi guys, I have the above for sale, new & unused (regs still have the plastic covering on). £60 (plus postage) to a good home. Just pm me if interested.
Regards.
PS sorry for posting in the main forum, forgot there was a "For sale" sub forum!
Dears
Are RCBO used in 3 phase loads, and the other question is about using RCBO for loads located in hazardous area, is it an obligation or not
Regards
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc