reset

  1. B

    airbag fault peugeot 206 gti 2003

    Hi guys the wifes car has recently come up with airbag fault on the main display I live on a Scottish island so a trip to main dealers is very expensive boat fares etc do any of you know how I may be able to trace fault a diagnostic fault finder could not trace fault cheers..brum
  2. londonfire

    Strange RCD tripping...

    Have had a call from a regular customer about their RCD TRIPPING. Strange thing is it has tripped every Monday between 6-6:30 am for the last month. The property has recently had new kitchen appliances (all high end Neff) Has also had the meter changed to a smart meter. My initial thought...
  3. S

    Problems with veritas 8 alarm

    Hi, Could you please give me some advice - I have the veritas 8 alarm with keypad and today I had to turn the mains off to do some diy work. When I turned it off within 2 minutes the alarm started beeping and the alarm went off inside and outside the house. I tried to reset it but it wasn’t...
  4. Lou7

    Intruder alarm

    I know its the wrong forum but does anyone know about intruder alarms, i'm replacing my old knackered panel with a new version but different terminations.
  5. P

    Single phase 240v motor wiring

    Please help. I have recently fitted a new pump, pressure switch and a 2.2kw(3HP) single phase 240v, 2 pole electric to my compressor. However I am at a loss at how to wire it. I have been trying to google it for 3 days, but am getting conflicting answers. It is a start capacitor and start run...
  6. M

    Immersun faulty, VO?

    hi all just want to check this set up. have 17th edition board (already installed) have main switch then a VO on one circuit (hold fire read rest), 2nd breaker immersion circuit. then first RCD unit which is fed via VO unit has half the house on it. then next rcd that has some sockets on...
  7. A

    PIR problem

    A block of flats has a set of outdoor security lights each switched on by a separate PIR sensor switch. The lights are 500w incandescent and the PIRs rated at 1000w or more. Different makes of PIR have been tried but after a few months they mostly fail by remaining turned on. Any thoughts on...
    • abbeyhouse
    • Thread
    • mention pir problem reset tried
    • Replies: 5
    • Forum: UK Electrical Forum
  8. R

    Need to reset a Galaxy 2-20 alarm system

    I have recently moved into a new house that has a Galaxy 2-20 system which the previous owners had on an ADT contract. Following a number of telephone line outages it needed an engineers reset but ADT will not give me the code and wanted £180 to come and reset it. Alternatively I can sign up...
  9. driverman

    MCB breaker markings reset or thrown away

    Hi Guys, Hopefully a quick question.......Breakers are marked by the manufacture symbol if they can be reset / reused or thrown away after a fault current. Where in BGB or OSG can I find the symbols? I've been looking. I'm sure they are in there somewhere. Thanks
  10. R

    Gardtec 300 series alarm lost code and need to reset HELP please !

    Gardtec 300 alarm in my house and I have lost the codes and I need to reset it any suggestions please
  11. R

    Fluke 6500 reset access code

    I got a Fluke 6500 PAT tester off ebay but the access code is no longer set at default (9999). I suspect the previous owner changed the code, I've contacted him but he claims to have no knowledge of the access code. Without going to Fluke and paying loads of money, is there any other way of...
  12. R

    Accenta/Optima LED Double Knock Problem

    Hi, I am trying to set up double knock on some zones on my alarm but having a problem. In the manual, it says to press the BELL and then press SKIP and LEDs 1 and 2 should come on - which it doesnt, all i get is a long BEEP. What am i doing wrong? Thanks in advance.
    • Rudie
    • Thread
    • attach button double engineer led press problem reset
    • Replies: 20
    • Forum: UK Electrical Forum
  13. S

    RCD not Resetting

    Hi there Local church TT system, CU with RCD as protection as main switch. Had a problem with the dishwasher tripping the RCD when running a intensive program, but that is a other issue. the main issue is when the RCD has tripped, you cannot reset it. There usually is no power on the...
  14. R

    Suppliers meter needs reset, who is responsible?

    Hi all, I recently attanded a property for a landlord that had no power on the economy 7 heaters. Normal supply was fine. I checked all the fuses and switches and got all the heaters working. I told the occupier it is their electricity suppliers problem as it is aproblem with the meter, When...
    • Robb
    • Thread
    • meter needs reset responsible suppliers
    • Replies: 16
    • Forum: UK Electrical Forum
  15. I

    tripping rcd

    Hi All. I was called out today to a tripped RCD in a domestic split board that not would reset unless the main switch was off. All mcbs off, all phase conductors removed in case of stuck mcb but still no rcd reset unless main swith was off. Any ideas, householder was not prepared for more...
  16. A

    immersion fault

    I have been out to a faulty immersion and have found that there is current through the thermostat. but no current after the next component between the two white wires. what is this and what does it do? and is it bypassable , repairable without having to change the whole element. thanks Mark
    • ample current
    • Thread
    • button fault immersion reset thermal thermostat
    • Replies: 19
    • Forum: UK Electrical Forum
  17. B

    Does anyone know of a remote overload reset for moeller gear?

    Ok, so I'll put in a little background. On nearly all the sites I look after, the overloads for just about all the smaller >75Kw motors are in a main panel in each sites main switch room. Not a problem until something trips out, it's usually operator error, overloading conveyors etc... Now...
  18. S

    lighting circuit inconsistent tripping

    Was asked to look at this job today where the lights on a 6a mcb wouldn't reset. I turned up watched the the person onsite reset the mcb where it instantly reset with a bang and arcing coming from it. I did it again, same thing happened. So i turned all the light switches off and reset the mcb...
  19. N

    Metrel MI 3304 Reset on Test?

    Did a small PAT test on a shop fitting site the other day. Was happily testing 110v appliances and running Insulation @ 500vdc and a touch current test (the tester was connected to a 110v supply). I came across 2 items that simply forced the tester to 'reboot' though - a Router (1200W) and a...
  20. D

    RCD wont trip... tehn trips.....then wont reset... Whats going on please?

    Hi all. I'm getting abit confused. Help would be appreciated. Was called to a customer who had lights dimming and kettle not working. Arrived and found TT sytem with in line Voltage operated Earth Leakage device between cutout and fuse box. The device was found to be faulty, large voltage...
Best EV Chargers 2025
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

TrueNAS JBOD Storage Server

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top