round | Page 2

round

Recent contents View information Top users
  1. R

    Double dimmer switch - swapping round switches

    Hi all, I'm a bit of a novice when it comes to light switches but managed to wire a single normal switch a few years back so thought I'd be okay with tackling this job but in truth I can't work out where to start! The issue is that in our living room we have a double dimmer switch but the...
  2. C

    house to shed getting 3core swa round bend of house.

    So I have a job to provide power to a cabin in a back garden.. Will be 3core 6mm SWA through back garden, consumer unit is at the front of the house, there is no way to dig the cable round to the back of the house as its a terraced house with a pathway to the back garden so will need to be run...
  3. C

    Round conduit box lids.

    Evening, is there a place to get good quality 20mm round plastic conduit lids? I’ve installed a load this weekend from Screwfix and they don’t seal correctly as the plastic is too thin. I’ve ended up using two lids on each box! Thanks.
  4. buzzlightyear

    it comes round again like xmas.

    you know what it like the dreaded mot ,need to take the van in for the mot . I need to strip the thing ,just in case you dont pass ,one hour to strip ,throw every thing in the garage just in case the van does not come back on the same day ,I has taken me 3 hours just to put all the gear back...
  5. 123

    Domestic - What do you normally use?

    If doing a domestic rewire, refurb or additions - what do you normally use to protect the cable?
  6. HappyHippyDad

    How to fit a junction box to a round metal pole?

    Evening all. I may have to fit a weatherproof junction box to a hollow, round metal pole. The junction box will be around 20-30cm from the ground and 2 x SWA will enter from the bottom (CW20). 1 x rubber flex will leave through the back of the JB into the pole and up to the top where the light...
  7. Pete999

    Why are the Planets almost round?

    Go on take the Mick not bothered, I couldn't sleep last night so I got up and started watching some NASA documentary's, one described how some Scientists reasoned that the Earth and the Moon, along with other planets within our Solar System, were created by giant collisions millenniums ago, so...
  8. marconi

    Why does 13A plug and socket system have flat pins when most others are round?

    (A sad admission: as a lad I collected plugs by make and colour and displayed them on a shelf in my bedroom - I liked for example the style of the 'Rock' make. I had therapy and am now recovered but some interest remains. Who remembers makes such as Rock, WG, Nettle, Wylex, Empire...
  9. cliffed

    Traying a swa round a corner

    Thoughts on this,it’s a 70mm 4 core swa.
  10. Marti

    Sparks in Bournemouth, Poole & round to Southampton and Portsmouth

    Hi There, This is a bit of a big "ask"but the only way I can gather what I need to make a big decision. We're considering moving to Bournemouth but there appears to be limited work compared to Essex and, as expected, lower rates as well. All of which is a price well worth paying for such a...
  11. Michaelwgroves

    Square peg round hole.......

    I'm looking at running 25mm SWA to supply secondary CU to future proof HMO design. See my previous threads for details House of Multiple Occupancy Design - https://www.electriciansforums.co.uk/threads/house-of-multiple-occupancy-design.124817/ My issue is a 100A CU and SP Distribution boards...
  12. Pete999

    Pete's Videos Round glass shiny things with rope

  13. Pete999

    Old Fashioned round light switches

    Asking for help in locating wooden blocks, the type that were used to mount old fashioned round lighting switches. I know how to fit them, and the switches that go with them, just having difficulty in locating a supply of the blocks, they were about 3 inches square, with an OG type finish to the...
  14. G

    On-site temporary electrics - H&S at it's best!

    Colleague just popped to site to check on progress before we start out install in a few weeks. Got him to send me through a snap of the temporary electrics on-site. Your thoughts?
  15. GMES

    Sunday night Pics of my best mate

    Just thought I would share a few of my Favourite shots of my Best mate Jack, I have thousands of em lol.
  16. Pete999

    Pete's Videos Clever or what??

  17. stitch

    Fuse Replacement

    I came across this while browsing. It may come in useful if you need a quick solution. :D
  18. 123

    So I have been doing it wrong all these years

    A how to video on installing an external socket:astonished: Get's bizarre around the 2 minute mark :grimacing:
  19. B

    Volex cu rcd

    My mum has a Volex CU which has been nuisance tripping last few months, tried disconnecting, switching off various things but found nothing that causes it. After a while it will come back on, but it has gone now and will not switch back on feels as no tension in RCD switch. Problem is cannot...
  20. J

    cable ducting without pulling rope installed

    Hi, Just wandering what to use to get an armoured through a new duct which has been installed prior to me being on site without a pull rope. Longest run is about 30 meters with probably 2 bends and is about 3 inch diameter but is the flexible type with ridges. Will rods go that far and round...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top