sanyo

  1. Energetic

    Compatability issues with SMA HF and Sanyo panels

    I have an issue with a system which i can't get my head around. If anyone can shed some light on it it would be much appreciated... The rig is 12x sanyo 250w on a SB3000HF inverter on a nearly west facing roof. The problem is as follows: At between 1430 and 1500 on a bright sunny cloudless...
  2. L

    another perspective on comparing different brands of panels

    So having had a bit of time to play with a loaned laptop running PV Sol I decided to analyse some 4 kWp systems using differrent panels all using an SMA SB 4000TL inverter. Here's a summary table. qty panel watt kWp PV Sol size area theoretical PV Sol % efficiency efficiency 16...
  3. S

    PV panel choice

    Hi I'd be grateful for any advice on which PV array to go with. I have narrowed down the multitude of choices to two Sanyo HIT and Sunlink PV 1. 16 x Sanyo 250w panels HIT 240N with a SSMA Sunny Boy inverter and Sunny Beam monitor Cost £13500 2. 16 x Sunlink PV 245w panels with a...
  4. S

    Sanyo Panels - worth the additional cost?

    The output of my Philadelphia mono cells falls off by circa 10% in continuous sunlight with little wind as the cell temperature rises. Not many days like that according to my logs. Sanyo HIT cells use a combination of monocrystalline and thin film and their power output increases slightly...
  5. N

    Help Power One Aurora / Sanyo HDE RCD tripping

    Odd one. Installed a system last Thursday. all tested. All good. Went back to adjust panels and as soon as we reconnected the RCD tripped... and continued to (and stand-alone). Seemed to trip as we approached 2kw (of 3.8) but might have been coincidence. Checked the IR for the cable run...
    • Noddy67
    • Thread
    • aurora electricians' talk help inverters power rcd rcd tripping requirement sanyo seperate tripping
    • Replies: 18
    • Forum: Solar PV Forum | Solar Panels Forum
  6. P

    Help BP verses Sanyo which would you recomend to your customers?

    Hi all, your help and expertise appreciated ( not to techie please as Im no sparky) I have been quoted 2 differing systems, both 2 array one SE and one SW with a sb 4000tl-20 inverter. One quote 3.75Kw with 15 Sanyo Hit 250w hybrid panels estimated Yield 2895KWh One quote 3.96Kw with 22 BP...
  7. G

    Sanyo HIT V Schuco

    Guys, Based on your experience with various manufacturers of panels, would you say a Sanyo HIT 240 EO1 panel with 10 panels 2.4 Kwh system out perform a Schuco 215 ps 05 panel with 12 panels at 2.58 Kwh ? Cheers Gaz.
  8. Z

    Which panels and inverter to choose?

    Hi, This is my first post, and I'll come clean at the outset; I'm not an electrician nor a solar installer. BUT I am in the process of getting an install, and would like some help in choosing the best option. I have found an installer whom I like, and whom I trust (I was recommended to him by...
  9. S

    sanyo stockist?

    Hi does any body a where i can get the sanyo panels from?
  10. D

    Sanyo HIT-H250E01 or HIT-N240SE10

    I can fit 16 Sanyo panels (just) onto the available roof area so can get close to the 4Kw max. for the best FIT. As I understand it the 2 latest Sanyo panels are the HIT-H250E01 or HIT-N240SE10. I'm being told by my preferred installer that quite apart from the cost being less for the 240, its...
  11. R

    sanyo HIT PV PANELS

    Hi am new to the forum,Is there anyone in scotland/ glasgow area that installs SANYO HIT PV PANELSi'm looking for about 10 panels and as always the best priceRoof space is dictating the number of panels i can haveThanksRob
  12. M

    Sanyo HIT-240HDE4 PV panel New unused still in the box.

    Hi, I am an MCS approved PV installer, I have one Sanyo HIT-240HDE4 PV panel New unused still in the box I have this one left over from a instal - it just would not fit on the roof space we had. Cost me £552 one month ago, will take an offer. Mob 07970035482 Alastair. Any questions please...
  13. O

    yield data from Sma sunny design software

    Hey dudes I m new to posting but have been reading a long time we are doing our first job next week then been checked for mcs but what i'm really wondering is why everyone is so crazy about a few PV manufacturers when according to Sma design software non of them stack up against Philadelphia...
  14. M

    Sanyo panels!

    We've just installed a 3.52kWp sanyo system consisting of 15 x 235 panels. It's on a southwest roof and the roof pitch is 30 degrees. How many units should this generate a day?
  15. SolarCity

    Prices of Sanyo HIT-H250 panels at Segen

    Since the Japanese tsunami and the results Sanyo panels shortages, we've been having a nightmare trying to source Sanyo panels, particularly the HIT-250w. The only company that we can find that has any is Segen and they've raised their prices quite significantly. We have been designing a lot...
  16. SolarCity

    Sanyo panels - 10 year guarantee

    Apparently, Sanyo are extending the guarantee on the HIT panels to 10 years. This is after having only 50 panels returned to them out of 2,000,000 panels produced. An impressive figure and yet another plus point for Sanyo panels.
  17. SolarCity

    Solar Array performance data

    Seeing as we have so many installers on this forum, an idea struck me about the performance of solar arrays. Seeing as between us all we must have hundreds of installs under our belts, wouldn't it be handy to collect all the data from these installs and save them on a seperate website...
  18. S

    Sanyo HIT250's and SB4000TL

    Hi I am not yet MCS but I have C&G2372 and I am a little rusty :o , and have designed a system using currently available gear. The design is as follows; 16 Sanyo HIT250's SB4000TL Arranged in 2 strings of 8 modules in each string Assumptions 1. My first assumption is that as its ≤4KW that it...
  19. P

    p v panels

    Can anyone tell me which they prefer to install and why - Romag or REC?
  20. S

    Average Annual Power Output per pound spent vs Panel Efficiency

    I am in the process of getting quotes for a PV system of up to 4kW for a house located 35 miles SW of London, and have been looking at various manufacturer's claims w.r.t. performance. The primary data that I seeing presented are: maximum panel output panel efficiency, albeit no satisfactory...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Advert

TrueNAS JBOD Storage Server

UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top