sensors

  1. Dobes_88

    Outdoor lighting sensors - any idea what make/model these are?

    Good evening! Had a bit of a flying visit to property earlier to look at something completely different, but was asked to have a quick nose at the outdoor lighting sensors. There's multiple halogen floodlights controlled by these multiple sensors throughout the property, 2 x sensors in...
  2. G

    Honeywell Accenta G4 PIR wiring

    Hi, can anyone help. I am trying to install a Honeywell Accenta G4 with new PIR sensors. I am struggling to get the new PIR sensors to work correctly. The new sensors I have are IS3016 Passive Infrared Motion sensors. When I have wired previous PIR sensors, they have had 6 wires -ve +ve...
  3. kropaske

    Non standard wireless alarm installation

    I am thinking of installing a wireless home alarm possibly texecom premium elite. But i would like to extend it to cover my van as well, when its park overnight. Hence few questions to advanced installers. Basicaly i would install a sensors on the back and side doors. Texecom have good coverage...
  4. S

    12V Proximity Sensor help

    Hi all I wonder if you guys can help me and point me in the right direction, we are after a 12V Proximity sensor that is waterproof to put on the back of a truck, when a solid item gets within the sensors range we want it to trigger a Light/LED, I know how to wire it up but struggling to find...
  5. D

    Pet sensitive wireless burglar alarm

    I need to put an alarm in my house and can't really be arsed to install a hard wired one. I have have two cats so need a pet sensitive one. Does anybody have any recommendations? If push comes to shove then I will put in a hard wired one if someone knows of one that's really good. All help...
  6. Phil Thompson

    Wirefree/Wireless PIR sensor for lighting recommendations please.

    I have a request from a customer who basically wants a number of LED floods installed. However he wants it set up that all the lights come on when any PIR picks up motion. 1 light will be a lot more labour intensive than the rest, but he's looking the sensors in awkward locations in regards...
  7. M

    Proximity Sensors

    Hi, I have been presented with 2 x Sick proximity sensors at a clients site to detect product entering/exiting a machine to varify line running etc. I was expecting this to be a 24vdc input to my panel which I have PLC input provision for. Unfortunately I cannot quote a part number for...
  8. B

    occupancy sensors

    Call out today to price some work, general stuff no problem, chap also asked if I could look into a problem with his bathroom lights. Main switch turns downlights and fan on. Ceiling mounted occupancy sensor turns on recessed tile lights, apparently when the wind blows, it activates the sensor...
  9. B

    occupancy sensors

    Anyone recomend me a ceiling mounted occupancy sensor they have used in a bathroom. It will be outside of the zones but worried it will be affected by humidity. It will be switching 5x 7w leds and triggering a bathroom fan (fan has own timer) Cheers Mykey
  10. F

    LED Tape & motion sensors

    Hi. I would really really appreciate help on this as I need advice please. I am going to fit LED tape inside my sliding wardrobe doors so they come on from the 2 motion sensors when doors open. I have bought 2 of the below motion sensors to be fit at each end of the wardrobe: Mini PIR Infra...
  11. A

    security lighting with 2 pirate sensors

    Hi can anyone help I have a security light with built in sensor and want to add another sensor but light only comes on once both sensors have been activated
  12. G

    Pir sensors outdoor lights help please

    Hello all i installed some post and spike lighting for a client switched via a 360 degree PIR controlled by an outdoor light switch now the clients wants to be able to flick a switch so his outside lights can over ride the sensor and remain illuminated until he switches them off then to be...
  13. A

    Individual pir fluorescent pir

    Hi guys Went to see a job today in a block of flats. It has 60 5ft fluorescent double tubes on 24/7. As you can imagine the owner had a heart attack when he got the bill. The stairways and entrances are to be kept on permanently but the lights leading to the flats he wants to be pir...
  14. driverman

    Remote outdoor PIR sensors

    Looking for decent outdoor PIR's possible 360 degrees, any ideas? I used to fit some many years go that were 360 degrees and could be wired with a light switch, so as to switch on and off lights as normal.
  15. F

    Question about fitting cabinet/motion sensors

    Hey everyone, I'm currently in the process of fitting a new kitchen and one of the units is a tall walk-in larder unit which will have a socket above. I have looked into a set of Plug an Play LED strip lights that would go down the sides so that each shelf has enough light. I was wondering if it...
  16. chudson

    Outdoor sensors - security - other than PIR

    Hi guys, I've got a problem that needs a fairly urgent solution. I have a customer where we replaced 4 sensors (PIR) that protect his house and switch on several flood lights around the perimeter. This also links up to a buzzer and indicator lamp indoors to notify him that the sensors have been...
  17. sjhall

    360 PIR 2way

    Alright Chaps, I've a long corridor in an office block that I'm fitting some 360 PIR sensors to the lighting, I need the lights to come on all at once for all locations of the corridor but there is a blind spot so I'll need to fit 2 sensors... Is there a sensor out there that you can link...
  18. T

    lighting sensors

    Hi, I'm an electrician and this is my 1st post! I'm currently working on a large house refurb and am going to install sensors for the lighting in the hall, stairs and landing feeding spotlights. Upstairs needs at least 4 sensors in the long hallway and some lights need to be controlled from 2...
  19. D

    alarm parts interchangable

    Can someone advise me if wired alarm parts are normally interchangeable with other makes? Customer has a accenta G6 panel but wants new keypad and PIR's as existing ones are looking a bit tatty. Never actually replaced alarm parts, only fitted complete systems so unsure if you can use different...
  20. C

    Multiple sensors for internal lighting

    Hi All, I have been asked to wire some lighting for an office and corridor involving sensor operation and Lighting distribution units and I was wondering what the best way of achieving this would be?? Briefly I will have 7 600x600 Grid lights in a corridor that will be operated by 3 sensors -...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Daily, weekly or monthly email

Back
Top