service | Page 3

service

  1. M

    service entrance seal

    Ida has made me aware, unfortunately, that the service entrance conduit to the house, is leaky. I have one breaker that has corroded to the point of gone bad. Others have some minor rust at the screw, but appear to be good. There is a Master breaker, so that's good. The box appear to have a...
  2. A

    Danfoss TP5000 How To Reset/Disable Service Interval Timer

    Hi I recently bought my property from my (now former) landlord. In the past, my former landlord instructed gas engineers to set a service interval timer on my Danfoss TP5000 programmer (photographed below). I now need to reset/disable this service interval timer. There are other threads on...
  3. V

    DNO charges for upgrading 100A TP+N service

    Hi all An industrial customer of ours is running a laser cutting machine at a local industrial estate unit. He has been there 15 years and has changed machines a couple of times ..but loading have always stayed the same or reduced a bit. This week they gave me a call as they could smell...
  4. B

    Proper way to ground and bond an antenna on the opposite side of the service entrance

    Hi all. First time poster here. I did find one thread on here that touches upon this topic, but my setup is a bit different. I want to install a TV antenna on the south wall of the house or perhaps the eve above it, The roof is concrete tile, so I don't want to try mounting anything up...
  5. H

    Bare Neutral Service Entrance

    Hi, I have what seems an unusual situation, and two electricians I've consulted say "I've never seen that before". An outbuilding put up in the early 90's. They re-used an old 60 amp double pull 4 fuse panel. There is a 3 wire underground service line with two insulated hot aluminum stranded...
  6. i=p/u

    Semiconductor service engineer

    Anyone ever had job like this, I see few companies are allowing electricians to apply and if successful says state of the art training... Just anything you know or heard about that type of job. Thx T.
  7. James

    A shining example of customer service

    https://www.ladbible.com/community/uk-electricians-pay-boy-wage-after-working-in-his-house-for-six-weeks-20210329
  8. I

    Service head EICR

    Hi everyone, Completed EICR for property recently and found there is a hole in the service head on neutral side, meaning live parts accessible by a finger. Photo attached. Does anyone knows best way to repair it? I've tried to find replacement element but couldn't find anything. Many thanks
  9. H

    Why is a PMDC motor getting hard, when on load after 10 years of service?

    Why is a PMDC motor getting hard, when on load after 10 years of service?
  10. ElectronicsNut

    GRAY Electrical PVC for Service Panel feed into the attic

    I have an old 30 breaker electrical service panel (from the early 1980's) that the main breakers are twisting to the side more and more and the cover panel no longer fits properly over them. I have decided that it is time to replace the service panel with a new one, as I feel this is turning...
  11. G

    Meter and Service Disconnect at Road - What Wires to use underground to connect main panel in house?

    I have 200amp connection, with the meter and service disconnect at the road (see pictures). House panel is about 75 feet from the service disconnect at the road. 1) Assuming I need 4/0-4/0-4/0-2/0 AL wire sizes (considered a sub panel), exactly what type of wires are required to run from the...
  12. C

    Service Cut and Reconnect

    Came across this video of an overhead cut and reconnect. What do you guys think? Is it done the same way in the UK?
  13. M

    UK Looped Service

    Hi Guys, I have a looped service in my house, concerned about the cable going next door. It looks old and brittle (I have not touched) . It was installed about 1955, do you think SP Energy Networks would replace the cable
  14. S

    100 Amp Service

    Hello all, I am looking to run 1.5 conduit underground 100 feet to my garage. I want 100 amps of electrical service - 2-2-2-4 wire URD or should I look at copper? WOuld copper 4-4-4-6 support it? I am not worried about code because I am away from all that - but I don't want to burn my house down.
  15. M

    VA 2015 code Question with bonding and grounding for service upgrade

    Hello, I am working in the state of VA and they use the 2015 State of VA code. I am upgrading to a 400 amp service the meter base supports two panels dual lugs in it. One panel will be a 200 breaker "MAIN" and other will be future use. I know how to wire most of it but really unsure how I would...
  16. S

    320 amp service

    I am doing the rough-in wiring on my house and will be using a licensed electrician to wire my panels, so this is purely a rough-in question. We are installing a 320 amp service, using two side by side 200 amp panels. I would assume that each panel should be fed by a separate service wire from...
  17. littlespark

    Affordable 3G dongle service.

    Been away to the family’s lodge in aviemore. Great cabin, but missing one thing; Internet! my mobile data ran out, and no Wi-fi coverage. Best we could get was 3G on my wife’s phone. Does anyone know a mobile internet dongle or access point that we could leave up there and use on a PAYG...
  18. C

    Is 2-2-4 udr wire good for 60amp service

    Is Stephens 2-2-4 Aluminum Urd Service Entrance Cable okay to use from a 60 amp breaker off my main box outside on the pole to a panel in my shed about 50 feet away?
  19. R

    Hotpoint Washing Machine Service Manuals

    Or any make for that matter. Does anyone know where I can pick these up in general. They seem to be scarce. I have a particular need at the moment for a Hotpoint Aquarius+ WDF740. Wiring diagrams and fuses and such. Thanks

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top