setting | Page 4

setting

Recent contents View information Top users
  1. M

    Catenary wire heights in a domestic setting.

    Due to difficulties running buried swa in a domestic garden (can explain if necessary), and limited alternatives, I'm considering suspending the run from the DB in garage to the outbuilding. Have looked through BGB and searched the forum for details regarding min height and have found various...
  2. I

    Advice on setting up an electrical training workshop.

    Hi guys, I'm after some advice on purchasing tools and equipment to re-equip an electrical training workshop. Here's a little bit of background information- I'm currently volunteering in a town called Mtwara in Tanzania as an Electrical Maintenance Vocational Advisor with Voluntary Services...
  3. W

    17000tl setting

    Hi all, I'm Installing two SMA 17000 tl inverters. There is no G59 relay. What do I set the inverters to G83 or G59/2? Rang SMA tech they said ask DNO, still waiting for his reply. Cheers
  4. H

    Wiring PIR sensors looping in and out.

    Should I be having problems with PIR security lights that are wired as a radial looping in and out from each light? I have 3 in a radial controlled via a switch but having problems getting them to work right. Any ideas? Is it because they are all linked? Back feed etc?
  5. P

    setting up your own company

    This is something I am totally new too, so please bare with me. I'm currently employed but looking to setup so I can work outside of my employment on my days off. I know I need liability insurance, not looking at getting registered yet. What is the process of a getting a company name etc. it's...
  6. B

    does any one know torque setting of wylex mcb

    Hi guys does any one know the torque setting for wylex mcb as the board has come with no paper work,and i have a torque screwdriver to try out Cheers in advance
  7. D

    Setting up for the first time ?

    I want to set up and register to niceic the problem I have is that for the assessment you are suppose to have previous jobs for inspection. I haven't got any as I have been doing electrical maintenance for the past two years. So how do I go about doing this ?
  8. L

    Alarm Timer Setting

    Hello All, I have just been called out to a alarm system where the system does not set on a timer, you have to press the set key to make it set, it is an Accenta Mercury 6. Anyone know the engineer menu map for the timer setting, it also does not set the alarm off when the front door has been...
  9. K

    Tenant keeps setting fire to house

    Been to a job today who the tenant keeps setting fire to the house. The latest incident is where he tried to cook a hamburger in a pop up toaster. (He pee'd on a fan heater 2 weeks ago) what is being asked for by his carers (and the fire brigade) are ways to stop him using his toaster, microwave...
  10. X

    Need help, setting horstmann economy 7 - it's just not working

    Hi guys, First thank you for reading and helping out. Ok I got the above water timer, since last week it's just doesn't seem to be working. First off i set the time as per current time, i set the time as "summer." but it just doesn't seem to heating up the water and importantly it doesn't...
  11. H

    The procedure for setting the thermal and magnetic overload on an MCCB?(Coursework)

    Hi there I'm Carlos. I'm new to this forum and I really hope I'm posting in the correct section for this question, but I really couldn't find any other section nor could I find anything when I searched for it. My question is in the title really. I've looked almost everywhere and have come to...
  12. M

    Setting up the Immersun Vs Central Heating - Help!

    The Immersun is reading "Water Hot" unless I have the thermostat on the Immersion element turned up to maximum. Currently water coming out of the taps is at about 68 degrees - far too hot for comfort. But if I set the immersion element lower than this, the boiler thermostat calls for heat and...
  13. W

    Setting an adjustable rcd?

    Hi I'm working on a distribution system where the main s/w is a 200amp 4 pole mcb with a bolt on adjustable rcd. The rcd needs to be set to 300ma and have a time delay for discrimination purposes. Can anyone advise to which setting on the ms adjuster I use? The ms scale goes from...
  14. N

    Zs readings using no trip setting megger 1502/02

    Hi just wondered if any one else has had a problem with zs readings using no trip setting. This has happened twice now I've carried out ze Pssc ok no problem gone to do zs and got a reading of 200 ohms used plug lead and 3 test leads same result. Mate got his meter out and got a value of...
  15. SolarCity

    Setting up SolarEdge monitoring Netgear WNCE2001/Homeplugs

    I'd really appreciate some help with setting up monitoring on a SolarEdge system. Computers aren't my strongest field so I think I'm confusing myself. I've tried setting up with the Netgear WNCE2001 WiFi adaptor but I'm not getting anywhere. What setting should I be using on the SolarEdge...
  16. W

    Megger MFT 1730's

    Does anyone else have ones of these? If so, have you mastered the blue-tooth transfer function? I'm having problems getting my head around it. I'm using windows XP wih a USB blue-tooth adapter. Any help would be GREATLY appriciated! Thanks, WS
  17. D

    higher Zs with RCD

    When testing Zs for circuits which also have RCD protection, what figure do you record onto your test sheets? when you exceed the max value for a specific MCB, due to the rcd. Do you just use a calculated value or do you actually record the value that you get even though it exceeds the max...
  18. M

    over curent setting

    hi, Is there any could explaine or give me some imformation regarding my 700kw genset w/ckt breaker has an over current trip setting of 125 percent.what will be the actual minimun tripping current level be?PF is 0.85 thanks,
  19. T

    Setting up!

    Hey Guys hows it going! Been doing alot of lurking on the forum recently. Hopefully this is the correct forum! Just wondering if I can borrow some advice................... I got my 2391 done my apprenticeship etc JOB Approved electrician. Is there any clear guides on what I need to...
  20. N

    Setting up my own electrical contracting business

    Hi all, I am currently giving serious thought to setting up my own electrical contracting business in the North West of England. I am just looking for advice from people who have set up there own companies, how to go about registering as a contractor and details on insurance issues etc etc...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top