Hi,
I am looking for a panel to replace a 20 year old System Four alarm panel, the simpler the better and has to have integral PSU and key pad. What would the group suggest?
Thanks
Hi Guys,
I've just joined as i'm sure you can see. I've got what i hope is a really simple question regarding a dpdt switch. Can I wire it up to be used as a spst switch?
I've made a record player and i've hooked up a dpdt switch which works fine, it's just off when the switch is in the "on"...
Hi guys,
I've been asked to supply an 'as installed' drawing of an installation I recently carried out to include the position of the sockets/lights and mark up the EM lighting Ect...
I'm no expert on CAD drawing but was wondering if there was a simple...ish program I could use to do the...
JVMElectrical
Thread
drawing
drawings
installed
led
program
simple
visio
As the title suggests, I'm running a submain. The space in which I have to work at the supply end is extremely limited though.
The CU at the supply where the SWA needs to terminate is mounted on the inside of the external wall in the porch. Ideally, I'd just run the SWA through the wall and up...
I have recently moved house and relocated to a new county. I have a simple chrome fix to do at the moment. I showed the client some spare deta chrome i had so i installed what i had spare to save me some cash and the went to the wholesalers for the rest. As usual they dont stock it in store...
Hello Guys,
Im not really in the electrical industry so don't have much knowledge but i know basic principals (done BETC Level3 Electrical). Anyway basically i bought a small strobe light for my band thinking it would be sound operated but its not and just flashes at random. Do you think it...
Sorry if this is in the wrong section, but I'm having a right mare with a new light fitting.
Forgive me if I'm being stupid but this is confusing me. (Possibly something simple)
So I have purchased a new light fitting to install (not usually a problem). However when taking off the old...
Hello
Just opened up a consumer unit, to find two circuits (lights and extractors) coming out of one 10 amp mcb. This isn't right is it? What should I do come the time to test and record results? Where would I write them down?
I've always thought its 1 fuse/breaker per circuit? head...
vectraj
Thread
cables
circuit
circuits
ideal
mcb
record
results
simple
Hi All,
I was hoping you'd be able to advise whether or not this is as simple a repair as it looks to me? I have some electronics experience, but in a thoroughly amateur capacity and nothing on any home appliances beyond re-wiring a plug.
Our shower has made a popping noise, followed by a odd...
Hi Folks!
First post! And hopefully it helps people in the future.
I have designed a desk lamp that I intend to make a sell a batch of. I have already decided that, to avoid the pitfalls of a non-registered electrician like myself wiring up a light circuit (although it would be simple enough...
Mike_rosie
Thread
certification
circuit
first
light
plug
removing
simple
Went to a property yesterday that had just been purchased by new owners.
C/U had been changed some 14 months ago along with rewire to lighting circuits and kitchen ring.
They had a domestic Install cert and the job was registered under part P and completed works was indeed up to the mark.
The...
Hi guys and girls. Got a problem on a lighting circuit.
The circuit has a junction box which I have just labeled up.
Theres only 5 lights
OUTSIDE LIGHT x2
SIDE LIGHTS x4
MAIN LIGHT
BEDROOM LIGHT x2
the main light and side lights work the problem is the rest on the light none of them switch...
1st off if it was a simple alarm problem i would have ot sorted and it would no longer be a problem!! Here we go...was sent today to install a simple alarm to alert a shop whem its back doors are opened. 2 rear doors. Both fitted with door contacts. 1 transformer. 1 small control panel with...
Morning....
I usually have a very clear idea over what is notifiable and what is not, but I'm not sure with this one!
If a consumer unit is fed from the main consumer unit, is the change of just the 2nd CU notifiable?
I realise the 'new' part P states 'change of consumer unit' as notifiable...
hi ladies and gents
I have opened a ring final circuit to add 3 sockets. All was goin well till I powered it up and it keeps tripping. I have tested and IR comes back fine. continuity also fine, all test readings are fine. the circuit has 9 sockets and has a 32 type c rcbo. any other info...
A cooker switch with single socket indicated a reverse polarity. It was connected to a double socket into which was plugged a gas hob and gas oven. Double socket also showed reverse polarity. However when the earth prong on the plug was inserted into the socket the LED display on the plug in...
Hi, and thank you for answering this question. Apologies in advance for lack of knowledge in your field.
I am currently looking into doing a part time course in order to become an Electrician, however on looking into it there seems to be 1001 ways to get there and they all say they are the...
Stu Whyley
Thread
become
electric
electrical
electrician
needed
qualifications
simple
Anyone around Marldon, Devon who could fit a couple of small panels and low voltage lighting into a battery for a stable block? I can give advice on specifics. Full kit supplied. Might lead to more.
Thanks
Hi all, I'm just finishing my 2396 design project and I've just got to the pv bit. The lecturer didn't spend any time it all so I'm a bit lost. All it has to be is for a 10kw per phase arrangement on top of a factory. Nothing fancy at all. I'd really appreciate any help offered.
Thanks in...
Hi all, question to the mentors (and/or fellow trainees!): I'm looking to learn a bit more about how heating systems (more boiler type) work. I can sit and wire a JB following a diagram no bother but struggle to understand some of the different systems. In most of our new builds it seems to be...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc