sockets | Page 3

sockets

Recent contents View information Top users
  1. M

    Tripping sockets for no apparent reason

    hi guys i'm new toi the forum but hoping someone can shed some light on this issue, my daughter moved into her house last year and all was fine until one day she'd found the sockets had tripped so reset and and were working fine again only for a few weeks later they tripped again she has done...
  2. Adawkins1

    UK Both sockets in one bedroom are spurs

    I've noticed that both sockets in one of my bedrooms are spurs, they both have just the one cable going into them. I checked the nearest socket in the bedroom next door but that only has two cables going into it, so they can't be feeding off that? Anyway to tell if these two sockets are safe and...
  3. W

    additional sockets of insulation backed plasterboard

    So I have inherited a small job in a commercial clients own home. they want extra sockets in a bedroom they are renovating. The walls are insulation backed plasterboard. I would guess around 25mm insulation on 12.5mm boards. To add the extra sockets I was thinking of just chasing out the...
  4. V

    How to supply a garage with 32 Amps for a car charger and another 32 Amps for sockets?

    Currently, I have a side garage port (with a garage door, but open on the garden side) supplied by a 2.5mm2 radial circuit. The plan is to convert the port to a proper garage next year. As the bedrooms are currently under refurbishment and the floorboards easily accessible, I would like to make...
  5. OnlQQker

    They're Examining Our Plugs And Sockets...

    They've not trod on one yet though!
  6. R

    I hav e 2 sockets that are inacessable in my flat, I have an inspection in a few days

    Two sockets totally inacessable, council electric inspection in a week. Most sockets are accessible
  7. W

    upstairs telephone sockets not working

    Hi There, wondering if anyone can help/assist in my problem, we bought a house 1 year ago, and i believe the house is 5-10 years old, quite a modern house, problem is all upstairs phone sockets do not work, no dial tone, router wont work in them, i have taken some pictures in hope someone might...
  8. C

    Adding new sockets in kitchen

    Hello there, we are wanting two new double sockets in our kitchen, one will be below counter to accommodate gas hob and ovens ignition plugs (rated 3amp each) and one above the counter to have occasional use of the coffee machine (1700watts). For transparency we only have a washing machine in...
  9. Dartlec

    Sockets on a lighting circuit - C3 or C2?

    Fun EICR at an HMO today, which was installed new 5 years ago (not particularly well!) Lots of niggly things that I'll sort, but in the kitchen cupboards were two unswitched sockets which confused me for a while. Turns out they are connected to the lighting circuit, switched by their own...
  10. R

    6mm to 2.5mm for sockets

    Hi I've got a job that i've been asked to quote for and i'm struggling with how to do it the best way. It's a summerhouse and the customer only wants a couple of double sockets and a light in it. My issue is that it's a fair distance from the house where the supply will be taken from. I've...
  11. highlanders317

    Advice for home pc area and extra sockets

    Hi All, I am having fibre to the premises fitted tomorrow, much earlier than expected, supposed to be another month or so. I looking for some advice on what to get to replace the current 1x4 sockets with 3 extension leads for pc, tv and always on. I am not looking doing the work myself, just...
  12. H

    Dedicated double socket or single sockets for washing machine and a tumble dryer.

    Existing double gang socket in the corner of a kitchen on a dedicated 12m length above ceiling 2.5 final circuit to CU, was used for a WM and a tumble dryer protected by a 32amp MCB. I wish to keep this arrangement but on lifting floor boards above ceiling I noted entire run of cable/s was not...
  13. Josh555

    Blowing sockets and popping RCD

    A client asked me to add two sockets in their bedroom I took power from two sockets in the lounge which is behind the bedroom wall. I ran a cable out of each socket for the new socket The problem is it now is tripping the RCD and blowing the old Existing sockets and light switches But the...
  14. D

    Circuit Breaker Tripping - Sockets

    Hi guys, I'm a novice, so be gentle. Ok, I've attached a photo. 1) I've come home to find none of my sockets working. I've checked my circuit breaker box and as expected the 'Sockets' switch is off. 2) I flicked the switch back to 'On' however the main switch to the right will not go to 'On'...
  15. Richardcavell

    Backboxes and power sockets

    Hi. I live near Blackpool in the UK. I don’t know anything about being an electrician. I’m retired. I’ve asked a man who does home improvements to consider doing some work here. We’ve negotiated that I’m going to choose the hardware that gets installed. He is speaking as though he wants to...
  16. brokentechie

    UK Any reason why sockets can't be installed on a horizontal surface?

    As title suggests, is there any regulation that prevents sockets from being installed on a horizontal surface? Think floor sockets but installed on a flat plasterboard surface which forms a recess shelf. For clarification, I'm not doing this myself, I just wanted some information before I go...
  17. N

    Some sockets not working but no fuse blown

    2 sockets in bedroom and 2 in utility room have stopped working. No fuses have blown
  18. spectredubs

    How do I safely use a 16A 250V EU subwoofer at home with UK wall sockets?

    Hi folks, new member here. I am a DJ/electronic music producer with basically zero experience in advanced electronics. I recently bought the Presonus Eris Sub8 subwoofer, I need help using this safely at home. The appliance came with an EU plug (two circular rods) and it says 16A 250V on it...
  19. JamieD93

    Wiring Two Double Sockets

    Hello everyone, Hoping someone can help me! We are currently re-wiring our property in the form of the labour intensive element (wall chasing, installing back boxes etc.) and our family electrician will be connecting everything and installing the new consumer unit later this month (I believe...
  20. R

    UK 13A Sockets keep latching in "on" position

    Hi All, I have a random issue where switches on 13A switched sockets keep latching in the "on" position. Once it happens the sockets are kaput, with the switch contacts fused together. After removing the socket there is no change. This has happened so far on two different circuits. First...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top