Hey,
I lifted a few sockets from a wall so I could paint without having to cut in around them. I haven’t lifted any light switches yet.
When re-fitting them I noticed one was a very tight fit (3 cables stuffed in to a shallow 25mm knock box. End of the ring and an extra socket coming off it?)...
Hi All,
This might be a bit of an odd question, I would really appreciate your thoughts. I am trying to up-date my mum's home, before putting it on the market for her as she has moved to a care home.
I've changed the boiler, consumer unit, the kitchen has been rewired, I've added insulation...
Hi,
I moved home a few months ago and the electrics RCD keep tripping. Sometimes it will happen every few days and sometimes will be fine for a few weeks before happening again.
I have identified the problem is coming from the utility room sockets. When it has happened before I have unplugged...
First : here are 2 x sockets .What code would you give and why ? 3rd pick you can see rear thermal damage on double socket
second : Roof above bathroom has terrible leaks . Lights spark and buzz etc when raining .Video evidence shown to tester . tester says it not a C1 or C2 as its not...
Hello All
done an EICR on a small office around 5 years old someone has added extra socket circuits from new to suit layout.
they have added extra sockets on different phases next to each other less than 100mm between them so 2 phases powering same desks.
Im possibly over thinking it but is...
Hi guys.
I had an inspection yesterday, where the lighting and sockets are in one circuit for each floor.
There are 3A fused spurs for the lights. I also need to replace the consumer unit with 18th edition one.
How would you code that? Any advice on the consumer unit would be appreciated.
Thanks
Hi,
Flat recently gutted and rewired from scratch.
Livingroom has two switches, one controls the main light, one controls a 5 amp circuit with 3 sockets (3 round pins).
Only just got round to testing it (a year later...) and 1 socket is working, 2 aren't. Any ideas what could be the issue?
Not...
Howdy, I'm looking for help with my plan to install an extra internal double socket and an external double waterproof socket to my garage.
I believe its a radial circuit at the moment, with mains electrical supply coming from the house to a fused circuit board, 30A fuse to current double...
Can anyone tell me the latest regulation for RCD protection on socket outlets, I believe it's required for sockets up to 32A but I'm told it applies to all socket outlets, we have to install a 63A 5 pin socket located outside. Thanks in advance
Hi fitting a a couple loft sockets on a radial circuit.
I only have 2.5mm cable and really don’t want to buy a reel 4mm2 is it ok to use on 32A mcb if I put a fcu before the sockets as it will never exceed 13A and the cable is rated for 27A.
Or is it better to add another separate 16A breaker...
Hi
Recently my son complained that he was getting shocks from his laptop when plugged into the mains in his room. I checked the socket and the others in his room and the wiring looked fine - red to live, black to neutral and firmly connected. I then used a plug-in Ring Main tester which...
There is a severe lack of sockets in our kitchen.
We have a cooker control switch with a single socket in it, but no cooker connected.
Would it be possible to run extra 13A sockets off the cooker control circuit?
If so, would this need to be done by an electrician to be complient with regs...
Evening all,
If a socket circuit is not RCD protected via an RCD/RCBO and there isn't the option of fitting an additional RCD enclosure or fitting RCBOs, is it permitted to add additional sockets to the circuit via RCD spurs or additional RCD socket outlets? (type A of course)...if the sockets...
Having a rewire done with Click Mode sockets. Doubles being CMA036 (BS 1363-2: 1995)
https://www.cef.co.uk/catalogue/products/1146346-2-gang-13a-double-pole-switched-socket-with-twin-earth-white
PDF
https://www.scolmore.com/_pdfs/spec_bros/Mode%20Sockets.pdf
I saw this about safety shutters...
Hi diyer here, I'm wanting to add two extra double sockets to my garage / workshop. Currently have two double sockets wired with 4mm t+e with a 16 amp breaker In the consumer unit. It looks like a radial circuit as it doesn't loop back to the consumer unit. Can I just continue the circuit with...
Hey
So I'll say I'm not a qualified sparky however I know how to wire up a replacement socket or a replacement dimmer (but I couldn't add a new one)
I'm looking at Lightwave products for smart sockets with energy monitoring. Are these any good good? Would I perhaps need anything in addition...
Hi
I have an Airbnb and some guests are charging their cars off of power sockets in my kitchen. So not only is this outwith my insurance coverage it is costing me a lot of money.
Are there sockets which can either
1) limit current?
Or
2) time out automatically after 30 minutes or so
I can...
hi guys i'm new toi the forum but hoping someone can shed some light on this issue, my daughter moved into her house last year and all was fine until one day she'd found the sockets had tripped so reset and and were working fine again only for a few weeks later they tripped again she has done...
I've noticed that both sockets in one of my bedrooms are spurs, they both have just the one cable going into them. I checked the nearest socket in the bedroom next door but that only has two cables going into it, so they can't be feeding off that? Anyway to tell if these two sockets are safe and...
So I have inherited a small job in a commercial clients own home. they want extra sockets in a bedroom they are renovating.
The walls are insulation backed plasterboard. I would guess around 25mm insulation on 12.5mm boards.
To add the extra sockets I was thinking of just chasing out the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc