Hi all,
I'm a bit of a novice when it comes to light switches but managed to wire a single normal switch a few years back so thought I'd be okay with tackling this job but in truth I can't work out where to start!
The issue is that in our living room we have a double dimmer switch but the...
I know this has probably been asked a dozen times on this forum but I just want to make sure that I'm doing this the correct way before going into my exam. I got told that in the am2 I need to have neutrals at every switch in connecters. I have never done it this at work hence the confusion...
Hello Every one ,
I just joined. I am looking for help in wiring a 3 and 2 Gang- 2 way switch.
I will be using the 3 gangs as 1 way switches, and a couple of the 2 Gangs a 2 way switches. Switches were imported from china, and came without any diagrams. I checked on the internet and found many...
Hey folks,
I just wanted to check something. I have 3 x 4W LED light bulbs on a 400W dimmer switch. I’ve read all this stuff about making sure the dimmer Wattage is right for the LED bulbs but it doesn’t say anything about the dimmer Watts being to high? Would this affect the Bulbs?
They...
hi there iam just looking for a little advice on fireman switches on how they are wired and how they disconnect power cant find anything so just a little post here thanks for your time
Hello,
I want to install LED downlights controlled from two different dimmers/switches. So the plan is to have one of the following options
have first switch as 2-way 400W dimmer switch like this, and second as 2-way smart on/off switch like this
have both switches as 2-way 400W dimmer switches...
We seem to have a spate of Legrand light switches in our house that have failed in a rather "interesting" (read: dangerous) way - the plastic switch covers seem to get loose over time and then eventually just fall off, exposing the live contacts underneath:
I've since gone through and...
I've been trying to work out whether grid switches (ie. a 20A switch) are acceptable on a normal 32A ring. I've read many threads online. Very few people seem sure whether it's acceptable but many sparks seem to do it in kitchens etc.
The argument seems to be that the switch is rated at 20A but...
Hi
My bungalow hall lights can be turned on and off from 4 different switches.
I was expecting these switches to be a mix of 3 way and intermediate switches, but all 4 of them are just 1 way switches.
I now have a problem that my hall lights are permanently turned on, and none of the switches...
Good afternoon all
I have a friend whose flat has a Memera 3 consumer board, which has the push-button test MCBs.
One of them does not trip when when the button is pressed, so obviously I wish to replace this for her.
However, it seems to be difficult to get hold of these now. I wonder if...
Hello,
I wanted to get an electrician to replace 3 x pneumatic time lag switches with electronic types.
Currently there are 2 lights and 3 switches...If you press more than one pneumatic switch the light stays on until the last switch runs out.
I wanted to buy the switches for the electrician...
As in the title.
The varilight V-pro and MK intelligent dimmer both say they can dim up to a maximum of 10 LED's. Why can they dim no more, even if the maximum wattage is not reached? I can find no explanation on their sites.
Zano produce a dimmer which can dim a much higher amount of LED's...
Evening All
Just quoting for a re-wire and the customer has asked if he can keep his original bakelite switches, not sure about this but guessing he can't as they don't conform to current BSEN. Can anyone point me the right direction??
Cheers in advance
Hello,
I bought my house last year and had a look in the consumer unit before I bought it and it had a dual RCD board and all PVC cable inside including a periodic inspection report that said it was compliant.
However when I came to remove some pendants to replace fittings I realised all the...
Hi everyone!
Got somewhat confused with an energenie master/slave switch set today.
The downstairs switch has (I’m sure I don’t need to say but will just in case):
Constant live
L1 (switch)
L2 (switch)
L2 (switch)
This switches on a hall light and stair light.
The upstairs switch is wired as...
In my house in Spain, I have just replaced 2 switches that controlled a single motorised shutter (the pair of switches in photos - NB, shutters are the middle of the cluster, other 2 being, 2-pin socket and a light switch) on a bed headboard that controlled a motorised window shutter. The...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc