Hi. Looking for help. My FiL has moved into a block of flats using the Bell 801 door release intercom for opening the main communal door to the flats. We have no opportunity to change the system for the whole block of flats. He is 80 and paraplegic and cannot get out of bed to let his carers in...
Hi.
I'm on my way to remove a faulty one of these. A 'heat saver' device fitted to a boiler. I haven't seen it yet but it seems to be a relay connected to a boiler thermostat.
Has anyone seen these before? I'm guessing I can remove it all and just hard wire the system so it doesn't interfere...
Hi there, the heating system I am working on has 6 zones and valves for each zone which was working fine with one boiler and one pump. some rads weren't getting hot so the plumber has installed 2 x pumps, one for 3 zones and another for 3 zones, the problem is I originally had all the oranges...
Hi, I’m not an electrician or a plumber, but I am confident diyer and am not completely incompetent!
I have a new build house with a boiler/hot water system which I believe is S plan. There are 3 motorised valves (one for downstairs heating, 1 for upstairs and 1 for hot water). So it’s a dual...
Good Evening All,
I'm not an electrician but I'd like to pick the brains of those that are please. Note I intend getting a qualified electrician to do the installation work, this is not a DIY job.
I have a SolarEdge based 10.7kW Solar PV system and a Tesla PW2 c/w Gateway and am export...
My little house in Spain sits in the forest and has a little wire from the electricity supplier, 20 amps max. It's a fragile link, caught up in trees which fall down regularly.
I'm planning to renovate this house with lots of PV on the roof, and make it is independent as I can of the grid...
Quick Question. Despite being 50 I am a newbie electrical installer. Preparing for my retirement from public service. Anyways - my Question. How the hell do MCBs work on a TT system. Say Ze is 33 Ohms with a 240 supply the PFC will be just over 7 Amps. How does that trip MCBs or is there were...
This states a SNE system, do I list this as a TN-S system.
The heads look the same as the PME types.
Our NICEIC area engineer was also not sure about this!
Is it ok to have PV system into shared (household) RCD?
So I've had a system installed, but not yet complete/signed off. The issue is that the PV (and a car charger) are wired into a shared RCD (with water heater, boiler and downstairs sockets). When all breakers are on, the system trips. It...
Hello everyone,
I’m based in the ROI and live in a rural location. Yesterday evening my electricity supply started to switch on and off randomly. After waiting for the evening for it to come back on it still has not. I checked my neighbors who are on the same DSO as my house and they all have...
Re:Grid tied System.
Could someone advise please on the following.
I wish to install a 3 phase (input) Grid Tied system to my home (2 - 5kw).
My problem being that I'm told that a certified (SEG) Company needs to do the installation, although I know I'm capable of carrying out this job.
Plus...
I have just watched one of John Ward's interesting videos -
It all makes sense apart from one of the final points involving adding an earth rod to an existing TN system. Not making a TT, but using the rod in addition to the TN system. This part is at 20 minutes and 8 seconds if you want to...
Installing a small above ground pool with a 1/2HP 120v pool pump. The house is older and has no grounding system that I can tell. Outlets are two prong. I know I need a gfci outlet to plug pump into but will this be safe and work as intended with no grounding system and only a hot and neutral...
SNMP or Modbus TCP/RTU Protocols to connect the PLC to external HMI LCD
HMI LCD with graphical representation & ability of issue control commmands power supply for all system components with backup batteries
built in web browser (http/https)
Different users' levels
SNMP protocol
Email...
Here's the setup:
400ah battery bank on 12v has a positive line that connects to a 400a fuse, then to a Blue Sea On/Off Switch, then to the positive Bus Bar, then to the Fuse Box, then to the Loads.
Loads come back on the negative to the Fuse Box, then the negative Bus, which goes to the...
Hi Guys Im wiring a domestic dwelling that has the Wolf Easi joist fitted. The central web is great is running services, but how do you fix cables running with and at the normal to the joists? My first thought was mini trunking say 100 by 100, then we should to do grouping calcs. Why trunking...
I'm just in the process of starting a rewire in a 1930's house, and the new owner has asked if the old servant/butler call system could be put back into service. It's not functioning at present, but I've not looked into any detail as to why. Anyone familiar with how they are supposed to work?
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc