t&e

  1. D

    Is pvc pvc T&E soon to be written off ?

    I made a very rare trip to my local wholesalers today (I usually buy stuff online now and have it delivered) and was speaking to the manager who I have known since college. He reckons in the coming amendment to the regs , grey pvc pvc twin and earth cable will be written off and we will be...
  2. mattg4321

    Linian T&E clips

    Anyone used them? Wondering how good they are. Got a job to clip some 10mm2 t&e surface and thinking of using them. Do they hold the cable securely and stop it ‘slipping through’ and sagging? Never used any of the linian clips to be honest.
  3. S

    T&E between light switches, what are my options?

    Hey, my downstairs hallway light switch is a 2 gang but doesn't control my upstairs hallway light (and just a 1 way for the upstairs light). After inspecting, there is unconnected T&E thats runs to the upstairs light from the downstairs 2 gang switch. Now I know that can't be used as a 3 core...
  4. K

    2 X Ovens on 4mm T&E

    Hi All, I have 1 X Fan oven 3.3Kw and an oven/microwave combo 3Kw. I had already installed a 4mm cable, as originally, there was only going to be one oven. After doing the calcs and looking at diversity, it seems to me that I'm safe to go with both ovens on this cable. Total Load: 6.3Kw Cable...
  5. S

    Protective conductor in T&E

    Hi all Been in electrical/electronics for many years and am now semi retired but keeping my hand in, but is it just me, my age or what but back in the eighties / ninties nothing seemed to change that much and yes there was far less choice in fittings. Having spent more time in industrial than...
  6. Dartlec

    How to protect existing 16mm T&E feed to CU when converting to sub main at source

    Currently quoting for a job that needs to be done next week and working out how best to proceed, so thoughts welcome. Current situation: -->PME incomer that has just been moved by UKPN within a porch (brick built permanent type) from one wall to another. -->60A main fuse -->Meter -->Large MK...
  7. I

    Armoured cable & T&E

    Hi All, I have a job to install 6mm supply to a small outbuilding. Ideally i would run SWA all the way from Meter box(im taking it from Henley block) to the outbuilding, but not in this case. Cable will have to go through the kitchen area. So im thinking to have 6mm t&e in trunking, it's only...
  8. S

    Flex or T&E

    When installing multiple downlights, I always use T&E but I’ve seen a few cases where flex is used. Does it matter? Is there a reg or best practice on this? Just interested in peoples input
  9. Dartlec

    Judging imperial submain T&E cable

    Doing an EICR on a top floor flat recently and run into an issue I often do - which is judging imperial sizes when they are larger than the standard 1/1.5/2.5mm equivalents. In this case, the flat is fed by a Twin and Earth cable that is somewhere around the 10-16mm range equivalent, with an...
  10. R

    Outdoor t&e - EICR fault code?

    Hi all The subject says it all - there's a lot of outside exposed clipped t&e out there with all the attendant physical protection and UV issues. Question is - should it have a fault code on a report? I guess it would be a C3 at most, but should it feature at all? Cheers
  11. Soulcraft Electric

    Ferrite sleeves for 1.00mm/1.5mm T&E

    Anyone know a supplier of ferrite sleeves for 1.0mm2/1.5mm2 T&E? Seeing a load of interference with a DAB radio
  12. happysteve

    Is galv conduit containing insulated and sheathed cables (e.g. T&E) still an exposed-conductive part?

    Eh up :) As per the title, "Is galv conduit containing insulated and sheathed cables (e.g. T&E) still an exposed-conductive part?" Clearly, if it contained unsheathed singles, it obviously is. If it's not an exposed-conductive part (and it's not extraneous in the case I'm thinking of) then it...
  13. A

    UFH T&E Cable Melting / Heat Damage

    I was tracing some electrical cabling last night and noticed a ~6" section of 2.5 T&E cable that appears to have been subject to heat damage and the plastic has started to melt. It's about 1m away from the CU in the garage and connected to a 32amp MCB. It's a radial circuit that powers a small...
  14. newfutile

    6mm T&E on 40 amp mcb

    while doing EICRs i often find this combination, if its clipped direct it dont worry me however many times i have no idea how the cable is routed im just wondering how others would code this?
  15. Mark42

    New 4mm T&E feed to existing remote 2.5mm ring. OK or not?

    I'm building a small rental annexe at my own house, which will be supplied by a new local sub-main, with local metering. This includes one existing bedroom which will become part of the annexe. This room has an existing ring final in 2.5mm, all in good condition. Rather than run two new 2.5s, a...
  16. V

    Landlords EICR and t&e sub mains without RCD

    Hi All Been doing a lot of EICR for landlords recently due to new legislation and agents i guess. One common issue im finding even with relatively new (10 years) old installations is a T&E sub main. Now some of these have a 100mA rcd .. or no RCD .. some are even wired in concentric cable...
  17. Baddegg

    10mm swa to 10mm t&e....

    Need to join 10mm swa (2 core) to 10mm T&E within a wiska box.....
  18. Cupa

    Floor socket - 2 sets of T&E?

    Before I moved into my flat, it had undergone a quick makeover and as part of that some wiring work was carried out including some extra sockets. I was told that under the kitchen breakfast bar there is T&E already there, it's just that the previous owner never installed a socket there but the...
  19. haptism

    16mm T&E tails on 100amp fuse

    Did a job earlier in a new build, part of a 5 year old new build estate in the darkest depths of kent. Anyhow opened up CU and saw 16mm tails so assumed would be on 80a fuse as there not huge demand. Then outside to check service head and main fuse is labelled 100a ?, the tails are 16mm t&e. I...
  20. sjhall

    4mm t&e radial circuit

    Hi Lads Do any of you guys run radial socket circuits ( with multiple points ) in 4mm ? Do you find 2 x 4mm in the back of a socket a squeeze? Only asking as I've just been passed 2 x 100m drums of 4mm off the lad doing the solar on a job I'm on for doing him a favour.... so 4mm radial...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top